Command |
Description |
%AANNCCFF |
Set Configuration |
$AA2 |
Read Configuration Status |
$AAM |
Read Module Name |
$AAF |
Read Firmware Version |
$AAT |
Read I/O Module Name for Slot 0 ~ Slot 3 |
$AAT1 |
Read I/O Module Name for Slot 4 ~ Slot 7 |
$AAT2 |
Read I/O Module Type for Slot 0 ~ Slot 7 |
$AA5 |
Read System Status |
$AAE |
Software Diagnostics for 4 Slots |
$AAE1 |
Software Diagnostics for 8 Slots |
~** |
Host OK |
~AA0 |
Read module status |
~AA1 |
Reset module status |
~AA2 |
Read host watchdog timeout setting |
~AA3ETTT |
Set host watchdog timeout setting |
~AAOn |
Change the Module Name |
~AAD |
Read DI Active state |
~AADvv |
Set DI Active state |
~AADMT |
Set the 5-digits Display Mode |
~AADV(data) |
Set the 5-digits Value |
~AADPV |
Set the single digit Value |
~AADR |
Read the 5-digits Value |
~AALPS |
Set the LED ON/OFF |
~AALR |
Read the LED ON/OFF Status |
~AAK |
Read Key Status |
~AAKCP |
Clear Key Status |