| Command |
$AA2 |
| Description |
Read the configuration status from the specified I-8000 system. |
| Syntax |
$AA2[CHK](cr)
| $ |
a delimiter character |
| AA |
2-characters HEX module address for the specified I-8000 system
,Range from 01 to FFh |
| 2 |
Command for read configuration status. |
| [CHK] |
2-characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AACCFF[chk](cr)
|
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command |
| AA |
2-characters HEX module address |
| CC |
Baudrate code Baudrate |
| FF |
Data format code Format |
| [CHK] |
2-characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
$012 |
| Response |
!010A00(cr) |
| Description |
The example reads the configuration from the I-8000 system
at address 01h.
Baudrate = > 115.2K bps
Check sum => enabled
|
|
|
|
| Modules |
I-8410,I-8810,I-8430,I-8431,I-8830,I-8831,I-8KE4,I-8KE8
|
|