| Command |
~AAKCP |
| Description |
This command clear the key status in the I-8000 system.
|
| Syntax |
~AAKCP[CHK](cr)
| ~ |
a delimiter character |
| AA |
2-characters HEX module address for the specified I-8000 system
,Range from 01 to FFh |
| K |
command for key status |
| C |
command for clear key status |
| P |
Specified key
0 = all
1 = Mode key,2 = UP key
3 = DOWN key,4 = SET key |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AA[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command |
| AA |
2-characters HEX module address |
| [CHK] |
2-characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
~01KC2 |
| Response |
!01 |
| Description |
This example clear the UP key status in the I-8000 system at address 01h
The response indicates the command is valid |
|
|
| Modules |
I-8410,I-8810,I-8430,I-8431,I-8830,I-8831,I-8KE4,I-8KE8
|
|