| Command |
$AAF |
| Description |
Read the firmware version code from the specified I-8000 system. |
| Syntax |
$AAF[CHK](cr)
| $ |
a delimiter character |
| AA |
2-characters HEX module address for the specified I-8000 system
,Range from 01 to FFh |
| F |
Command for read firmware version. |
| [CHK] |
2-characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AA(version)[chk](cr)
|
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command |
| AA |
2-characters HEX module address |
| (version) |
4-characters for version code |
| [CHK] |
2-characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
$01M |
| Response |
!01A1.0(cr) |
| Description |
The example reads the firmware version from the I-8000 system
at address 01h.
The firmware version of the I-8000 system is A1.0 |
|
|
|
| Modules |
I-8410,I-8810,I-8430,I-8431,I-8830,I-8831,I-8KE4,I-8KE8
|
|