home > product> solutions > pc based i/o board > Introduction > PEX-D96S/PIO-D96SU/PIO-D96U
 
PEX-D96S/PIO-D96SU/PIO-D96U
PCI Express/Universal PCI, 96-channel DIO Board
 
~ NEW ~  
 
Model: PEX-D96S  
   
Model: PIO-D96SU Model: PIO-D96U
 
  • Support the +3.3/+5 V PCI bus for PIO-D96U/D96SU
  • Support PCI Express x1 for PEX-D96S
  • 96 channels of digital I/O
  • Bi-direction programmable I/O ports under software control
  • All I/O lines buffered on the board
  • Twelve 8-bit bi-direction I/O ports
  • Interrupt source: 4-channel
  • Pull-high/Pull-low Jumpers for DI Channels
  • Supports Card ID (SMD Switch)
  • Buffer output for higher driving capability
  • Output status readback
  • Connects directly to DB-24PR, DB-24PD, DB-24RD, DB-24PRD, DB-16P8R,
    DB-24POR, DB-24SSR, DB-24C or any OPTO-22 Compatible daughter boards
 
The PEX-D96S card is a new generation product provided by ICP DAS to meet RoHS compliance requirements.

The PIO-D96U/D96SU supports 3.3 V/5 V PCI bus, while the PEX-D96S supports PCI Express bus. These cards provide 96 TTL Digital I/O lines that consist of twelve 8-bit bi-directional ports. Each group of three 8-bit ports is arranged on the connector as Port A (PA), Port B (PB) and Port C (PC), respectively, and all ports are configured as inputs ports on power-up or after a reset.

The PIO-D96U provides four connectors for I/O wiring, while the PIO-D96SU and PEX-D96S provides a single high-density connector that reduces the amount of installation space required for the card in the computer.

The PIO-D96U/D96SU and PEX-D96S cards include an onboard Card ID switch that enables the board to be recognized via software if two or more boards are installed in the same computer. The pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted.

These cards support various OS such as Linux, DOS, Windows 98, Windows NT, Windows 2000, 32-/64-bit Windows XP/2003/2008/Vista/7 and Windows 8. It also provides the DLL and Active X control, and various language sample programs in Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW to help users to quickly and easily develop their applications.
 
Comparison Table
Model
Interface
DI Pull-High/Low
Compatibility
Advantage
PEX-D96S
PCI Express
5 V/CMOS
Low power consumption、Low temperature
PIO-D96SU
Universal PCI
5 V/CMOS
Low power consumption、Low temperature
PIO-D96U
Universal PCI
5 V/TTL
High DO Driving (Output Capability)
 
  • DOS Lib and TC/BC/MSC sample program (with source codes)
  • DLL and OCX SDK for Windows 95/98/NT/2K.
  • DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.
  • VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.
  • LabVIEW toolkit for Windows.
  • Driver for Linux and DasyLab.
 
Model Name PEX-D96S PIO-D96SU PIO-D96U
Programmable Digital I/O
Channels 96
Digital Inputs
Compatibility 5 V/CMOS 5 V/TTL
Input Voltage Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Response Speed 500 kHz 1 MHz
Digital Outputs
Compatibility 5 V/CMOS 5 V/TTL
Output Voltage Logic 0: 0.1 V max.
Logic 1: 4.4 V min.
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Output Capability Sink: 6 mA @ 0.33 V
Source: 6 mA @ 4.77 V
Sink: 64 mA @ 0.8 V
Source: 32 mA @ 2.0
Response Speed 500 kHz 1 MHz
General
Bus Type PCI Express x1 3.3 V/5 V Universal PCI, 32-bit, 33 MHz
Data Bus 8-bit
Card ID Yes(4-bit)
I/O Connector Female SCSI II 100-pin x 1 Female DB37 x 1
50-pin box header x 3
Dimensions (L x W x D) 130 mm x 95 mm x 22 mm 180 mm x 105 mm x 22 mm
Power Consumption 650 mA @ +3.3 V
0 mA @ +12 V
600 mA @ +5 V
Operating Temperature 0 ~ 60 °C
Storage Temperature -20 ~ 70 °C
Humidity 5 ~ 85% RH, non-condensing
 
PEX-D96S CR PCI Express, 96-channel DIO board (SCSI II Connector, RoHS)
PIO-D96SU CR Universal PCI, 96-channel DIO board (SCSI II Connector, RoHS)
PIO-D96U CR Universal PCI, 96-channel DIO board (RoHS)
 
CA-3710 DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°))
CA-3710D DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°))
CA-3715DM-H DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS)
CA-3730DM-H DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS)
CA-3750DM DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)
CA-4002 37-pin Male D-sub connector with plastic cover.
CA-5002 50-pin flat cable 20 cm
CA-5015 50-pin flat cable 1.5 M
CA-SCSI100-15 SCSI II 100-pin & 100-pin Male connector cable 1.5M
ADP-37/PCI 50-pin connector extender to 37-pin connector
DB-24PD 24-channel of isolated D/I board
DB-24RD 24-channel of relay board
DB-24PRD 24-channel of power relay board
DB-24POR 24-channel of PhotoMos Relay output board
DB-24SSR 24-channel of Solid State Relay output board
DB-24C 24-channel of open-collector output board
DN-100 I/O Connector Block with DIN-Rail Mounting and 100-Pin SCSI II Connector
DN-100-CA I/O Connector Block with DIN-Rail Mounting and 100-Pin SCSI II Connector Include one CA-SCSI100-15 cable
DN-37/DN-37-381 I/O Connector Block with DIN-Rail Mounting and 37-Pin D-Sub Connector
DN-50/DN-50-381 I/O Connector Block with DIN-Rail Mounting and 50-Pin Header
 
 
I/O Card Main Page
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player