這個頁面上的內容需要較新版本的 Adobe Flash Player。
home
>support >
FAQ
>
DAQ Cards (ISA/PCI)
Support
Download
Case Study
FAQ
XPAC
WinPAC-8000
WinPAC-5000
WinCon-8000
ViewPAC
I-7000 Remote I/O
I-7188 Controller
I-8000 Controller
PDS and Ethernet Controller
FRnet
DAQ Cards (ISA/PCI)
EKAN
Win-graf Soft-Logic PAC
ISaGRAF Soft-Logic PAC
InduSoft
NAPOPC DA Server
Linux
AR Series
DCON Utility Pro
Others
Catalog
Training
Subscribe
DAQ Cards (ISA/PCI)
|
Hardware
|
Software
|
Multiport
|
DAQ Cards (ISA/PCI)_Hardware
11_
How do I upgrade my DAQ Card from the PCI bus to the PCI Express interface?
10_
What is the DIO response time of PIO/PEX-DIO series cards?
9_
How to measure current signals from the A/D channel on board?
8_
Why do I get uncertain or incorrect digital input data when digital input channels are unconnected?
7_
How to clean the golden fingers of the PCI/ISA/PEX card?
5_
What’s the difference between an ADC conversion rate and a sampling rate ?
2_
What is the settling time of PIO-DA16/8/4 ?
1_
How to identify which PCI board is board_0 or board_1 ?
TOP
DAQ Cards (ISA/PCI)_Software
26_
What’s difference between the signal source frequency and the AD sampling rate?
25_
How do I use a PCI-TMC12A module to measure external frequencies?
24_
How do I enable the Memory Dump function during a System Crash?
23_
How to control a single channel when performing DI/DO data transmission?
22_
How to process data transmission from multiple DI/DO channels?
20_
How to use UniDAQ driver in LabVIEW?
19_
How to use I/O Card classic driver in LabVIEW?
18_
Why does the timer counter read an incorrect value after selecting the mode, or why is there no timer counter activity?
17_
How to drive a DAQ card with LabWindows/CVI?
16_
How to use Card ID?
15_
How to use UniDAQ DLL in a MATLAB environment?
13_
How to install I/O Card driver in 32-bit Windows 7?
12_
How to modify the software of the PCI-P16R16 that compatible with software of the PISO-P16R16U?
11_
How to use DAQ Card in Windows XP Embedded?
10_
How to use the ICP DAS I/O card DLL in VC++.NET2005?
9_
How to use the ICP DAS I/O card DLL in VB.NET 2005?
8_
How to use the ICP DAS I/O card DLL in C# 2005?
7_
How to use the ICP DAS I/O card DLL in VB.NET 2003 ?
6_
How to use the ICP DAS I/O card DLL in C# 2003 ?
5_
How to use OCX (ActiveX Control) in Visual C++ .net 2003?
4_
How to use two or more cards in the same time without calling ActiveBoard() function again and again?
3_
The PIO-PISO.exe program identifies PCI cards correctly, but Diag.exe and demo programs failed and show the error message "Card initialize error" or "No xxx card in this system". What's the problem ?
2_
Can I/O card drivers (for Windows) work with non-x86 CPU ?
1_
The NT/2K/XP driver installation failed with USER account. What's the problem?
TOP
Multiport
3_
Why can't the COM Ports for the Multi-Port Serial Card be set to start from COM1?
2_
Does VXC series cards support customized baud rate?
1_
How to make a loop-back test on a RS-485 port of VXC Card?
TOP
這個頁面上的內容需要較新版本的 Adobe Flash Player。