Model: I-8430
Model: I-8830
Model:I-8430-G
Model:I-8830-G
  I-8430/ I-8830
  I-8430-G/ I-8830-G

     Embedded Ethernet I/O Unit
 

 
 
 
 

     The I-8430 and I-8830 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.
 
 
The CPU is a 8-bit 80188 (40MHz). Apart from the original functions (input, output, power on value, safe value, high limit value, low limit value) of the I/O module, the firmware provides additional functions to allow I/O modules in different slots to be combined together. For example, if the channel value of an AI module is above a predefined high limit value, or below a predefined low limit value, the information can be immediately passed to another DO module to trigger alarm or light.

Various software development kits (SDK) and demos are provided, such as DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc.

Although all the SDK drivers support only COM Port interface,users can also use there SDK by installing the VxComm Utility .  VxComm Utility can create Virtual COM Port to map the Ethernet Port, then the I/O modules can be easily added to the I-8430/I-8830 and can be quickly integrated into an existing system.
 
     
  back  
 
 
 
  Supports IPv4.
  Supports the  Ethernet or RS-232 communication interface.
  Supports DCON communication protocol
  Dual Bus designed to supports I-8K and I-87K series I/O
  modules, such as DI/DO, AI/AO, Counter/Frequency
  modules
  Compact I/O Expansion slot allows the quick installation of
  various 8K and 87K I/O modules
  By using the VxComm Utility, PC can use Virtual COM Port to
  communicate with the remote Ethernet I/O.

  Note: Remote Ethernet I/O must support XServer to have
  Virtual COM Port function.
vxcomm
  I/O configurable using DCON Utility via Ethernet port or RS-
  232 Port.
  Firmware updated via the RS-232 port
  Firmware auto scan AI modules and can map alarm to DO
  modules on the slots.
  Dual Watch Dog mechanism enable I-8000 system can work
  reliablely under harsh environment.

  Ventilated housing designed to operate between ¡V25¢XC to
  +75¢XC

  Using DIN rail clips or Screw poles around the corners
  allows the control unit to be easily mounted on the control
  box
  Frame Ground provides a path for bypassing ESD, allowing
  enhanced static protection (ESD) capability and ensures that
  the module is more reliable.


  Various SDKs provided ( free )
  DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC
  server, etc
 
     
  back  
     
 
 
 
CPU module
CPU 80188 or compatible (8-bit and 40MHz)
SRAM 512KBytes
Flash 512KBytes
EEPROM 2KBytes
NVRAM Yes
RTC (real time clock) Yes
Hardware Serial Number Yes
Built-in Watchdog Timer Yes
Communicate Interface
COM 0
Internal communication with the 87K modules
COM 1 RS-232 (to update firmware)
COM 2
-
COM 3
RS-232/RS-485
COM 4 -
Ethernet Port 10BaseT NE2000 compatible
SMMI
5 - Digit LED Display Yes
3 - Programmable LED Indicators Yes
4 - Push Buttons Yes
I/O expansion slots
8430 4 Slots
8830 8 Slots
Dimensions
8430 230mm x 110mm x 75.5mm
8830 354mm x 110mm x 75.5mm
Operating Environment
Operating Temperature -25°C to +75°C
Storage Temperature -30°C to +85°C
Humidity 5 ~ 95%,non-condensing
Power
Protection Power reverse polarity protection
3KV power isolation Yes
Power requirement 10 ~ 30 V/DC
Power supply 20W
Power consumption I-8430 : 3.9 W
I-8830 : 5.1 W
 
     
  back  
     
 
 
 
I-8430     I-8430 Embedded I/O unit
I-8830     I-8830 Embedded I/O unit
I-8430-G     I-8430 Embedded I/O unit with gray color
I-8830-G     I-8830 Embedded I/O unit with gray color
 
     
  back  
     
 
 
 
KA-52F    AC100~250V input, DC 24V/1A output, flat type power supply
DIN-KA52F    KA-52F with DIN-Rail mount
DP-665    AC 85 ~ 270 V input, DC 24V/1.7A and 5V/0.5A output power supply
DP-660    24V/1.7A 5V/0.5A Power Supply
DP-1200    24V/5A Power Supply
 
     
  back