home > product> solutions > industrial communication> Fieldbus > DeviceNet
 
CAN-2018D
 
Applications
Hardware Specifications
Thermocouple Type
Ordering Information
Related Products
 
 
  • 繁體中文
  • English
  • CAN-2018D

    DeviceNet Slave Module of 8-channel thermocouple input

     
     

    DeviceNet is one kind of the network protocols based on the CAN bus and mainly used for the embedded network of the machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipments control, remote data acquisition, environmental monitoring, and packaging machines control, etc.

    The CAN-2018D follows DeviceNet specification Volume I/II, Release 2.0. User can access the thermocouple input status and set the configuration via DeviceNet EDS file. CAN-2018D has 8-channel thermocouple input and it can be used to various applications. By the DeviceNet masters of ICP DAS, you can quickly build a DeviceNet network to approach your requirements. For more information about the DeviceNet master interfaces and other DeviceNet products, please refer to the following web site.

     
     
    Applications  


    We have communicated with the following DeviceNet masters or gateways.

    1. Allen-Bradley(AB) 193-DNENCAT, 193-DNENCATR
    2. OMRON CJ1W-DRM21
    3. OMRON CS1W-DRM21-V1
    4. OMRON C200HW-DRM21-V1
    5. OMRON 3G8F7-DRM21-E
     
     
    Hardware Specifications  
    DeviceNet Interface
    DeviceNet Specification
    Volume I, Release 2.0 & Volume II, Release 2.0, Errata5
    DeviceNet subscribe
    Group 2 Only Server
    Connection supported
    1 connection for Explicit Messaging
    1 connection for Polled I/O
    1 connection for Bit-Strobe I/O
    Baud Rate Setting by Rotary Switch
    125 kbps, 250 kbps, 500 kbps
    Node ID Setting by Rotary Switch
    0 ~ 63
    Heartbeat message
    Yes
    Shutdown message
    Yes
    Terminal Resistor
    Switch for 120 Ω terminal resistor
    Connector
    5-pin screwed terminal block
    (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
    EDS file
    Yes
    Analog Input
    Channels
    8
    Input Type
    +/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V
    +/-20mA,(Requires Optional External 125 Ohm Resistor)
    Thermocouple (J, K, T, E, R, S, B, N, C)
    Resolution
    16-bit
    Sampling Rate
    10 Samples/Sec. (Total)
    Accuracy
    +/-0.1% FSR
    Zero Drift
    +/- 10 μV/ °C
    Span Drift
    +/- 25 ppm/ °C
    Common Mode Rejection
    86 dB
    Normal Mode Rejection
    100 dB
    Input Impedance
    >400 kΩ
    Individual Channel Configuration
    Yes
    Open Thermocouple Detection
    Yes
    Over voltage Protection
    240 Vrms
    ESD Protection
    +/-4kV, Contact for each terminal.
    Intra-module Isolation, Field to Logic
    3000 VDC
    LED
    Power
    PWR, red
    DeviceNet Status
    NET/MOD, green/orange
    Power
    Power Supply
    Unregulated +10 ~ +30 VDC
    Power Consumption
    1.5 W
    Mechanism
    Installation
    DIN-Rail
    Dimensions
    33 mm x 99 mm x 78 mm (W x L x H)
    Environment
    Operating Temp.
    -25 ~ 75 ℃
    Storage Temp.
    -30 ~ 80 ℃
    Humidity
    10 ~ 90% RH, non-condensing
     
     
    Thermocouple Type  
    Type Code
    Temperature Range (°C)
    J
    -210 °C ~ +1200 °C
    K
    -270 °C ~ +1372 °C
    T
    -270 °C ~ +400 °C
    E
    -270 °C ~ +1000 °C
    R
    -50 °C ~ +1765 °C
    S
    -50 °C ~ +1765 °C
    B
    0 °C ~ +1820 °C
    N
    -270 °C ~ +1300 °C
    C
    0 °C ~ +2320 °C
     
     
    Ordering Information  
    CAN-2018D/S
    DeviceNet Slave Module of 8-channel Thermocouple Input
    Include CAN-2018D module and a CN-1824 daughter board
     
     
    Related Products  
    DeivceNet Master Library Support PISO-CAN serials, PEX-CAN serials and PCM-CAN with DeviceNet master library
    PISO-DNM100U-D
    PISO-DNM100U-T
    1 Port Intelligent DeviceNet Master Communication Board with DeviceNet Firmware Inside for universal PCI bus
    I-7565-DNM-G CR USB/DeviceNet Master communication Converter with D-sub 9-pin connector
    I-8124W 1 Port DeviceNet Master Module with dual port RAM
    I-87124 1 Port High Performance DeviceNet Master Module
    CA-0910-C 9-pin Female D-sub & 3-wire CAN bus cable (1M)
     
       
    TOP  
       
       

    這個頁面上的內容需要較新版本的 Adobe Flash Player。

    取得 Adobe Flash Player