PIO-D48SU/PIO-D48U/PEX-D48
PIO-D48U/D48SU: Universal PCI, 48通道數位輸出/輸入卡
PEX-D48: PCI Express, 48 通道數位輸出/輸入卡 |
|
| |
|
 |
 |
| Mode: PIO-D48SU |
Model: PIO-D48U |
| |
 |
| Model: PEX-D48 |
|
|
 |
- PIO-D48 為 PCI bus介面，支援 +5 V PCI bus插槽
- PIO-D48U/D48SU 為Universal PCI介面，支援 +3.3 V 及+5 V PCI bus 插槽
- PEX-D48 為PCI Express 介面，支援 PCI Express x 1 插槽
- 最多可提供48 個數位輸出入通道
- 雙向I/O通道可以軟體方式設定為Input/Output埠
- 內建 I/O line 緩衝區
- 六個8-bit埠可分別規化為 Input/Output
- 四個中斷源
- PIO-D48U/D48SU: Digital I/O 反應速度最高可達1 μs (1 MHz)
- PEX-D48: Digital I/O 反應速度最高可達500 KHz
- 一個16位元的事件計數器
- 一個32位元的內部程式計數器
- Card ID 功能為PIO-D48U/D48SU/PEX-D48僅有
- 數位輸入埠可設定為Pull-high或Pull-low
- 短卡設計
- 可直接連接 DB-24PR, DB-24PD, DB-24RD, DB-24PRD, DB-16P8R, DB-24POR, DB-24SSR, DB-24C 或者其他相容 OPTO-22 規格的端子板
- 支援 DO Readback 功能
|
|
|
| |
 |
PIO-D48SU/PIO-D48U/PEX-D48板卡是泓格新上市並符合RoHS環保規範的產品，新的PIO-D48U/D48SU及PEX-D48的設計可直接相容於PIO-D48。
PIO-D48U/D48SU支援3.3 V/5 V PCI bus介面, PEX-D48支援 PCI Express 介面。並提供48個符合TTL規範的數位輸出入通道，它由六個8位元的雙向I/O埠所組成，這些埠分別叫作埠 A(PA) 、埠 B(PB) 、埠 C(PC) 而埠 C 又可以被分成二個半寬度 (4-bit) 的埠，每個 Port 的初始設定皆為輸入模式。
PIO-D48U/D48SU 及PEX-D48 還有其他實用的功能, 第一種是 Card ID 指撥開關, 讓使用者可以自由設定每張板卡的識別碼.當系統同時使用多張 PIO-D48U/D48SU或PEX-D48 板卡時,使用者可以迅速而簡單區別這些同型號的板卡。第二種是 DI Pull High/Low 設定功能, 數位輸入埠可設定為 pull-high 或 pull-low ，當信號線脫落或斷線時，該 DI 值會相對維持 High 或 Low 的狀態(非浮動)。
此系列卡支援在Linux、DOS、Windows 98/NT/2000、32/64-Bit Windows XP/2003/Vista/2008/7 及 Windows 8…等作業系統環境下使用，還提供有動態函式庫及Active X控制項使開發更加容易及簡單易懂的各種語言範例程式，如Turbo C++、Borland C++、Microsoft C++、Visual C++、Borland Delphi、Borland C++ Builder、Visual Basic、Visual C#.NET、Visual Basic.NET及LabVIEW等，讓用戶能夠快速的上手來使用。 |
| |
 |
- 支援DOS Lib 及TC 範例程式 (包含 source codes)
- 支援Windows 95/98/NT/2K 的DLL 及 OCX SDK
- 支援32-bit/64-bit Windows XP/2003/2008/7/8/10 的 DLL 及 SDK
- 支援VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB 範例程式 (包含 source codes)
- 支援Windows LabVIEW 開發工具
- 支援 Linux 及 DasyLab 驅動程式
|
| |
 |
| Model Name |
PIO-D48SU |
PIO-D48U |
PEX-D48 |
| Programmable Digital I/O |
| Channels |
48 |
| Digital Input |
| Compatibility |
5 V/TTL |
| Input Voltage |
Logic 0: 0.8 V max.
Logic 1: 2.0 V min. |
| Response Speed |
1 MHz |
500 KHz |
| Digital Output |
| Compatibility |
5 V/TTL |
| Output Voltage |
Logic 0: 0.4 V max.
Logic 1: 2.4 V min. |
| Output Capability |
Sink: 64 mA @ 0.8 V
Source: 32 mA @ 2.0 V |
| Response Speed |
1 MHz |
500 KHz |
| Timer/Counter |
| Channels |
2 (Event Timer x 1/32-bit Timer x 1) |
| Resolution |
16-bit |
| Compatibility |
5 V/TTL |
| Reference Clock |
Internal: 4 MHz |
| General |
| Bus Type |
3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
PCI Express x 1 |
| Data Bus |
8-bit |
| Card ID |
Yes (4-bit) |
| I/O Connector |
Female SCSI II 100-pin x 1 |
Female DB37 x 1
50-pin box header x 1 |
| Dimensions (L x W x D) |
140 mm x 97 mm x 22 mm |
156 mm x 105 mm x 22 mm |
172 mm x 112 mm x 22 mm |
| Power Consumption |
900 mA @ +5 V |
1500 mA @ +3.3 V
0 mA @ +12 V |
| Operating Temperature |
0 ~ 60 °C |
| Storage Temperature |
-20 ~ 70 °C |
| Humidity |
5 ~ 85% RH, non-condensing |
|
| |
 |
| PIO-D48 CR |
PCI bus 48-channel DIO board (RoHS) |
| PIO-D48U CR |
Universal PCI, 48-channel DIO board (RoHS) |
| PEX-D48 CR |
PCI Express , 48-channel DIO board (RoHS) |
| PIO-D48SU CR |
Universal PCI, 48-channel DIO board (RoHS) |
|
| |
 |
| CA-3710 |
DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) |
| CA-3710D |
DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) |
| CA-3715DM-H |
DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS) |
| CA-3730DM-H |
DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) |
| CA-3750DM |
DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) |
| CA-4002 |
37-pin Male D-sub connector with plastic cover. |
| CA-5002 |
50-pin flat cable 20 cm |
| CA-5015 |
50-pin flat cable 1.5 M |
| CA-SCSI100-15 |
SCSI II 100-pin & 100-pin Male connector cable 1.5 M |
| ADP-37/PCI |
50-pin connector extender to 37-pin connector |
| DB-24P |
24-channel isolated D/I board |
| DB-24R |
24-channel relay board |
| DB-24PR |
24-channel power relay board |
| DB-24POR |
24-channel of PhotoMos Relay output board |
| DB-24SSR |
24-channel of Solid State Relay output board |
| DB-24C |
24-channel of open-collector output board |
| DN-100 |
I/O Connector Block with DIN-Rail Mounting and 100-Pin SCSI II Connector |
| DN-100-CA |
I/O Connector Block with DIN-Rail Mounting and 100-Pin SCSI II Connector
Include one CA-SCSI100-15 cable |
| DN-37/DN-37-381 |
I/O Connector Block with DIN-Rail Mounting and 37-Pin D-Sub Connector |
| DN-50/DN-50-381 |
I/O Connector Block with DIN-Rail Mounting and 50-Pin Header |
|
| |
 |
| |
 |
|
| |
|
|
| |
|
|
