EtherNet/IP
    EIP-2017
 
Applications
 
Features
 
Utility
 
Hardware Specifications
 
Ordering Information
 
Optional Accessories
    EtherNet/IP
 
Introduction Page
     

 
 
       
 

EIP-2017
~ Available soon ~
Isolated 8-ch DIFF / 16-ch SE Analog Input EtherNet/IP module
 
     
 

The EIP-2000 is an industrial remote I/O module series supporting the EtherNet/IP protocol. Users can seamlessly integrate these modules into the Ethernet network from the industrial floor to the enterprise. The EIP-2000 allows daisy chain connection which permits the flexibility in locating devices, eases installation and lowers infrastructure costs. All the modules can be deployed in the network topologies such as star, line or ring. The isolation design protects the EIP-2000 against the harmful interference.

The EIP-2017 is an 8-ch Differential and 16-ch Single-Ended AI module. The module provides a jumper to switch Differential and Single-Ended mode. It supports voltage and current input type. The accuracy of the measurement is smaller than 0.1% FSR. The Module is designed as an EtherNet/IP adapter. Users can obtain the input status as well as the connection status of the EIP-2017 by the LEDs indication. In addition, ICPDAS provides software utility to easily configure and test the EIP-2000 modules via Ethernet.

 
 
 
   
 
  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote diagnosis
  • Testing Equipment
   
 
 
     
  General Features:
  • Transfer protocol: EtherNet/IP
  • Powerful 32-bit MCU handles efficient network traffic
  • 10/100 Base-TX Ethernet, RJ-45 x 2 (Auto-negotiating, auto MDI/MDIX, LED Indicators)
  • Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols
  • Easy firmware update via Ethernet
  • Removable terminal block connector
  • LED display to indicate the I/O status
  • Analog Input
    • Differential: 16 Channels
    • Single ended: 8 Channels
  • Internal resistors (125Ω) selectable in Differential mode
  • RoHS compliant

  
     
 
 
 
     
 

ICP DAS provides the EIP-2000 configuration utility for Windows 2K/XP/Vista and Win 7.

  • Network parameters configuration
  • AI parameters configuration
  • Functions configuration such as Type Code selection
  • Easy test to transmit/receive the I/O status by EtherNet/IP
  • Setting files management.
 
     
 
 
 
     
 
Analog Input
Channels 8-ch differential or 16-ch single-ended
( Jump selectable)
Input Type Voltage : ¡Ó150 mV, ¡Ó500 mV, ¡Ó1 V, ¡Ó5 V, ¡Ó10 V
Current : 0 ~ +20 mA, +4 ~ +20 mA, ¡Ó20 mA
(Jumper Selectable in DIFF mode. An external resistor is required in SE mode)
Resolution 24bits
Sampling Rate 10 samples/ second
Accuracy +/-0.1%
Zero Drift +/-20uV/¢XC
Span Drift +/-25ppm/¢XC
Input Impedance Voltage Input: >400 k£[, Current Input: 125 £[
Intra-Module Isolation, Field-to-Logic 3000 VDC
Overvoltage protection 240 Vrms
Individual Channel Configuration Yes
Communication Interface
Connector 10/100 Base-TX, 8-pin RJ-45 x 2
Support daisy chain connection.
Standard Supported IEEE 802.3 Ethernet/IP
Power
Input Voltage Range 10V ~ 30V
Power Consumption 3.8W
Mechanism
Installation DIN-Rail
Dimensions 110mm x 90mm x 33mm (H x W x D)
Environment
Storage Temperature -30¢J ~ +80¢J
 
     
 
 
 
     
 
EIP-2017 CR
Isolated 8-ch DIFF or 16-ch SE AI EtherNet/IP Module (RoHS)
 
     
 
 
 
     
 
MSM-6226 CR
24-Port L2 Plus Managed Fast Ethernet Switch + 2 TP/SFP Gigabit Dual Media (RoHS)
NS-205 CR
Unmanaged 5-Port Industrial Ethernet Switch (RoHS)
NS-205PSE CR
Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)
NS-205PSE-24V CR
Unmanaged 5-Port 10/100 Mbps PoE(PSE) Ethernet Switch; 24 VDC Input
NSM-205PSE-24V CR
Unmanaged 5-Port 10/100 Mbps PoE(PSE) Ethernet Switch with Metal Casing; 24 VDC Input
 
     
   
Copyright© ICP DAS Co., Ltd. All Rights Reserved