~NEW~
 
 
 
 
 
Model: NS-205PSE-24V Model: NSM-205PSE-24V
NS-205PSE-24V/NSM-205PSE-24V
5-Port 10/100 Mbps PoE (PSE) Ethernet Switch with 24 VDC Input
 
         
     
 
 
 
The NS-205PSE-24V/NSM-205PSE-24V is a 5-port unmanaged PoE (Power-over-Ethernet) Industrial Ethernet switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NS-205PSE-24V/NSM-205PSE-24V makes centralized power supply come true and provides up to 15.4 watts of power per PSE port.

The NS-205PSE-24V/NSM-205PSE-24V is designed with 24 VDC to 48 VDC boost for PoE application where 48 VDC power supply is not available.
 
   
     
 
 
 
  • Automatic MDI/MDI-X crossover for plug-and-play
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 3.2 Gbps high performance memory bandwidth
  • Power Input, +18 VDC ~ +32 VDC
  • Supports operating temperatures from -40 ¢XC ~ +75 ¢XC
  • DIN-Rail
  • IEEE 802.3af Compliant PoE Ports
  • Four PoE ports with Power Sourcing Equipment (PSE) operation
  • Auto-detection of PD (powered devices) and automatic power management
  • Over-temperature, over-current and over/under-voltage detection
 
   
     
 
 
 
Models NS-205PSE-24V NSM-205PSE-24V
Technology
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward, wire speed switching
MAC Addresses 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE802.3x flow control, back pressure flow control
Interface
RJ-45 Ports 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators Power, Link/Act , 10/100M, Power Device is detected
Ethernet Isolation 1500 Vrms 1 minute
+/-6 kV EMS Protection Yes
Power Input
Input Voltage Range +18 ~ +32 VDC for PoE output
Power Consumption 0.24 A@ 24 VDC without PD loading;
3.2 A@ 24 VDC with PD full loading; 4.6 A@ 18 VDC with PD full loading
Protection Power reverse polarity protection
Frame Ground for EMS Protection Yes
Connection 3-Pin Removable Terminal Block
PoE Output
PoE Compliance 100% IEEE 802.3af compliant
PoE Classification PSE (Power Sourcing Equipment)
PoE Voltage +48 VDC depending on power input
PoE Power Up to 15.4 watts per channel
PoE Operation Automatic detection and power management
Mechanical
Casing Plastic (Flammability UL 94V-0) Metal (IP30 Protection)
Dimensions (W x L x H) 31 mm x 157 mm x 113 mm 25 mm x 168 mm x 119 mm
Installation DIN-Rail
Environmental
Operating Temperature -40 ¢XC ~ +75 ¢XC
Storage Temperature -40 ¢XC ~ +85 ¢XC
Ambient Relative Humidity 10% ~ 90% RH, non-condensing
 
   
     
 
 
 
   NS-205PSE-24V CR    Unmanaged 5-Port 10/100 Mbps PoE(PSE) Ethernet Switch; 24 VDC Input
   NSM-205PSE-24V CR    Unmanaged 5-Port 10/100 Mbps PoE(PSE) Ethernet Switch with Metal Casing; 24 VDC Input
 
   
     
 
 
 
DP-1200    24V/5A, 120 W Power Supply with DIN-Rail Mounting
MDR-60-24    24V/2.5A, 60 W Power Supply with DIN-Rail Mounting
MDR-20-24    24V/1.0A, 24 W Power Supply with DIN-Rail Mounting
DIN-KA52F    24V/1.04A, 25 W Power Supply with DIN-Rail Mounting
 
   
     
Copyright© ICP DAS Co., Ltd. All Rights Reserved