ICP DAS FAQ
New!
WinCon 8000 Compact Embedded Controller
001
Q. Which model of Wincon-8000 is my best choice?
002
Q. What's the capacity of Muti-task in wincon-8000?
003
Q. How to write a program to let Wincon-8000 communicating with other devices
(Ethernet controller,I7188EA,EN....) via Ethernet?
004
Q. After compiling , BMP image can't be placed in image or picture of VB form?
005
Q. How to display my Local text (for ex: Traditional Chinese ..) in the UI of AP?
006
Q. How to protect my critical data in CF Card?
007
Q. What USB devices are supported by Wincon-8000 ? Should I need driver?
I-7188E/8000E Ethernet Controller
014
Q: Is it possible to change the communication port on the protocol TCP/IP use for the internal network
015
Q: How to download the file to i7188E or update the MiniOS7 image file?
016
Q:How to enable DHCP protocol for the I-7188E series module?
DAQ Cards (ISA/PCI) Software
006
Q. How to use the ICP DAS I/O card DLL in C#2003?
New!
007
Q. How to use the ICP DAS I/O card DLL in VB.NET2003?
New!
008
Q. How to use the ICP DAS I/O card DLL in C# 2005?
New!
009
Q. How to use the ICP DAS I/O card DLL in VB.NET 2005?
New!
010
Q. How to use the ICP DAS I/O card DLL in VC++.NET2005?
New!
011
Q. How to use DAQ Card in Windows XP Embedded?
New!
ISaGRAF
028
Q: How to use multi-port Modbus Master in the Wincon-8037/8337/8737 & Wincon-8036/8336/8736 ?
029
Q: How to send/receive message from ISaGRAF controller to remote PCs or Controllers via Ethernet UDP communication ?
030
Q:Setting special ¡§range¡¨ parameter of temperature input board to get clear ¡§Degree Celsius¡¨ or ¡§Degree Fahrenheit¡¨ input value. For ex, ¡§1535¡¨ means 15.35 degree.
031
Q:Setting a special ¡§ADR_¡¨ parameter of remote I-7000 & I-87xxx temperature input module to get clear ¡§Degree Celsius¡¨ or ¡§Degree Fahrenheit¡¨ input value. For ex, ¡§8754¡¨ means 87.54 degree.
032
Q:How to access to ISaGRAF variables as array ? (A demo program of sending string to COM2 or COM3 when alarm 1 to 8 happens)
033
Q:Setting Up More Modbus RTU Slave Ports in Wincon ISaGRAF Controllers
034
Q:Compiling error result in different ISaGRAF version ?
035
Q:Slow down ISaGRAF driver speed to work better with Indusoft software in W-8036/8336/8736 & W-8046/8346/8746?
036
Q:Redundancy Solution in Wincon
037
Q:I-7188EG/XG support remotely downloads via Modem Link
038
Q:Setting I-7188EG/XG 's COM3 as Modbus RTU slave port
039
Q:ISaGRAF version 3.4 & 3.5 Now Supporting "Variable Array" !!!
040
Q:Setting I-8437/I-8837/I-8437-80/I-8837-80 's COM3 as Modbus RTU slave port
041
Q:How to connect PC / HMI to a Redundancy system with a single IP address ?
042
Q:How to use Wincon connecting to Ethernet I/O ? The I/O scan rate is about 30 to 40 msec for 3000 to 6000 I/O channels .
043
Q:How to setup Wincon-8xx7 as TCP/IP Client to communicate to PC or other TCP/IP Server device ? Or Wincon automatically report data to PC via TCP/IP ?
044
Q:Wincon-8xx7 / 8xx6 automatically report data to PC / InduSoft or PC / HMI ?
045
Q:ISaGRAF controllers display message to EKAN Modview LED
046
Q:How to Write 16-bits to Modbus RTU devices by Mobus function call No. 6 ?
047
Q:How to Read or Write Floating Point Value to Modbus RTU Slave device ?
048
Q:How to use Wincon-8xx7 / 8xx6 to control FRNET I/O ?
049
Q:Setting a special ¡§CODE_¡¨ parameter of ¡§MBUS_R¡¨ & ¡¨MBUS_R1¡¨ to get a clear ¡§Degree Celsius¡¨ or ¡§Degree Fahrenheit¡¨ input value of M-7000 temperature module . For ex, ¡§3012¡¨ means 30.12 degree.
050
Q:How to connect an ISaGRAF controller to M-7000 remote I/O ?
New!
051
Q:VB.net 2005 Demo program using Modbus TCP/IP protocol to control ISaGRAF controllers
New!
052
Q:VB 6.0 Demo program using Modbus TCP/IP protocol to control ISaGRAF controllers
New!
053
Q:Performance Comparison Table of ISaGRAF Controllers
New!
054
Q:iPAC-8xx7 and £gPAC-7186EG support Data Logger function
New!
055
Q:How to connect I-7018z to get 6 channels of 4 to 20 mA input and 4 channles of Thermo-couple temperature input ? And also display the value on PC by VB 6.0 program ?
New!
056
Q:How to do periodic operation in ISaGRAF controllers ?
New!
057
Q:How to record I-8017H ¡¦s Ch.1 to Ch.4 voltage input in a user allocated RAM memory in the Wincon-8xx7 ? The sampling time is one record every 0.01 second. The record period is 1 to 10 minutes. Then PC can download this record and display it as a trend curve diagram by M.S. Excel.
New!
058
Q:How to record I-8017H ¡¦s Ch.1 to Ch.4 voltage input in S-256 / 512 in I-8437-80 or I-8837-80 ? The sampling time is one record every 0.05 second. The record period is 1 to 10 minutes. Then PC can download this record and display it as a trend curve diagram by M.S. Excel.
New!
059
Q:Some skill to operate RS-232 / 422 / 485 serial COM Port by COM functions
New!
060
Q:How to read / write file data in Wincon ?
New!
061
Q:How to connect RS-485 remote I-7000 and I-87xxx I/O modules in I-8xx7 , I-7188EG/XG and Wincon-8xx7 controller ? How to program RS-485 remote I-7017RC , I-87017RC and I-7018Z ?
New!
062
Q:How to setup a redundant system with Ethernet I/O ?
New!
063
Q:Why my RS-485 remote I-7000 and I-87K Output module 's host watchdog function doesn't work to reset its output channels to safe output value while the RS-485 communication cable is broken ?
New!
066
Q:How to process the Integer or Real value coming from the RS-232 / RS-485 device ? Like the device of Bar-Code reader or RS-232 weight meter.
New!