NSM-200LX
1000Base-T to 1000Base-LX Fiber Media Converter (Single mode 1310nm, SC connector)
特色
• Provides 1 x 1000 Mbps fiber port with SC type connector for 1000 Base-LX device
• Supports wide operating temperatures from -30 °C ~ +75 °C
• Transparent to jumbo packets up to 10 KB
• Provides Link Fault Pass-through (LFP)
• Supports redundant +12 VDC ~ +48 VDC power input
• Supports wide operating temperatures from -30 °C ~ +75 °C
• Transparent to jumbo packets up to 10 KB
• Provides Link Fault Pass-through (LFP)
• Supports redundant +12 VDC ~ +48 VDC power input
介紹
ICP DAS's line of feature rich 10/100/1000 Fiber Media Converters transparently connects copper to multimode or single mode fiber. Our 10/100/1000 Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the line of non-fiber based equipment, or the distance between two devices. Gigabit Media Converters are also available with support for LFP (Link Fault Pass-through) feature.
應用
相似產品
| LED 燈 | |
|---|---|
| 狀態 | PWR1, PWR2, P-Fail, Link/Act, 100M, 1000M |
| 乙太網路 | |
|---|---|
| Ports | 1 x RJ-45, 10/100/1000Base-T(X) |
| 標準 | IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX; IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity |
| 處理型式 | Store & forward, wire speed switching |
| MAC 長度 | 8K |
| 記憶體頻寬 | 10 Gbps |
| 封包暫存記憶體 | 1 Mbit |
| 巨型封包 | 10K |
| 指發開關 | 1 x LFP Enable |
| 光纖 | |
|---|---|
| Ports | 1 x 1000Base-FX, SC connector |
| 模式 | Single-Mode |
| 光纖線 | 10/125 μm |
| 距離 | 10 km |
| 波長 | 1310 nm |
| TX 輸出 | -9.4 dBm Min. -3 dBm Max. |
| RX 靈敏度 | -20 dBm |
| RX 超載 | -3 dBm |
| 電源 | |
|---|---|
| 反極性保護 | Yes |
| 輸入範圍 | +12 VDC ~ +48 VDC Redundant dual Input(Non-isolated) |
| 冗餘電源輸入 | Yes |
| 功耗 | 0.1 A @ 24 VDC |
| 告警輸出 | Yes,Relay 1 A @ 30 VDC |
| 機構 | |
|---|---|
| 外殼 | Metal |
| 尺寸 (mm) | DIN-rail mounting: 33 x 120 x 109 (W x L x H) Wall mounting: 33 x 159 x 103 (W x L x H) |
| 安裝 | DIN-rail mounting or wall mounting (optional) |
| 環境 | |
|---|---|
| 工作溫度 | -30 °C ~ +75 °C |
| 儲存溫度 | -40 °C ~ +85 °C |
| 濕度 | 10% ~ 90% RH, non-condensing |
