4-port 10/100 Mbps Ethernet with 1 fiber port Switch (Multi mode, ST connector)
特色
• Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
• Each port supports both 10/100 Mbps speed auto negotiation
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• Automatic MDI/MDI-X crossover for plug-and-play
• Store-and-forward architecture
• Supports operating temperatures from 0 ~ +70 °C
• Multi-mode, ST Connector Fiber supports
介紹
The NS-205FT is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) transmissions. The NS-205FT provides a wide 10 to 30 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
應用
相似產品
| LED 燈 | |
|---|---|
| 狀態 | Power, Link/Act, 10/100M, Full duplex/Half duplex (Fiber Port) |
| 乙太網路 | |
|---|---|
| Ports | 4 x RJ-45, 10/100Base-TX |
| 標準 | IEEE 802.3, 802.3u, 802.3x |
| 處理型式 | Store & forward; wire speed switching |
| MAC 長度 | 1024 |
| 記憶體頻寬 | 3.2 Gbps |
| 封包暫存記憶體 | 512 Kbit |
| 流量控制 | IEEE 802.3x flow control, back pressure flow control |
| 隔離 | 1500 Vrms 1 minute |
| 光纖 | |
|---|---|
| Ports | 1 x 100 Base-FX, ST connector |
| 模式 | Multi-Mode |
| 光纖線 | 50/125, 62.5/125 or 100/140 μm |
| 距離 | 2 km, (62.5/125 μm recommended) for full duplex |
| 波長 | 1300 or 1310nm |
| TX 輸出 | -20 dBm Min. -14 dBm Max. |
| RX 靈敏度 | -34 dBm |
| 電源 | |
|---|---|
| 輸入範圍 | +10 ~ +30 VDC |
| 功耗 | 0.14 A @ 24 VDC |
| 機構 | |
|---|---|
| 外殼 | Plastic |
| 尺寸 (mm) | 64 x 118 x 101 (W x L x H) |
| 安裝 | DIN-Rail Mounting |
| 環境 | |
|---|---|
| 工作溫度 | 0 °C ~ +70 °C |
| 儲存溫度 | -20 °C ~ +85 °C |
| 濕度 | 10% ~ 90% RH, non-condensing |
