介紹
Fiber optic transmission medium is a good material to protect data transmission from EMI/RFI interference and has been used in harsh environment extensively. On the other hand, CAN bus is famous in industrial application. In order to solve the problem between different transmission medium, I-2532 is specially designed for converting the electrical CAN bus signal to fiber optic cables. The fiber length between two I-2532s can be up to 1.4km (4593ft), it is mainly decided by the cable attenuation of fiber and the CAN bus baud. I-2532 is the economic solution for applications which require protecting the data transmission from electrical exposure, surges, lightning or chemical corrosion.
應用
- Control System
- Building Automation
- Factory Automation
- Distributed data acquisition
相似產品
LED 燈 | |
---|---|
狀態 | 1 x Power 2 x CAN status |
光纖 | |
---|---|
Ports | Multi Mode; ST connector x 1 |
光纖線 | 50/125, 62.5/125 or 100/140 μm (62.5/125μm is recommended) |
波長 | 850 nm |
傳播延遲 | 125ns max (125ns delay shortens bus line length by ~ 25 m) |
站與站間距離 | 1.4 km max (62.5 / 125 μm recommended) |
CAN | |
---|---|
Ports | 1 |
Baud Rate | 10 k ~ 500 k bps |
終端電阻 | Switch for 120Ω terminal resistor |
規格 | ISO-11898-2, CAN 2.0A and CAN 2.0B |
電源 | |
---|---|
輸入範圍 | +10 VDC ~ +30 VDC |
功耗 | 0.5 W |
機構 | |
---|---|
外殼 | Plastic |
尺寸 (mm) | 32.3 x 77.5 x 99.0 (W x L x H) |
安裝 | DIN-Rail |
環境 | |
---|---|
工作溫度 | -25 ~ +75 °C |
儲存溫度 | -30 ~ +80 °C |
濕度 | 10 ~ 90% RH, Non-condensing |