ICP DAS 泓格科技

I-7188

I-7188(D)/512

檔案

檔案名稱

發行日

大小

下載

7188_512_Demo.zip

2015/06/05

547 KB

檔案結構

本資料夾有一 7188_DEMO.pdf 資料檔，該檔案提供各範例說明。範例依據編譯器各別提供並分類放置於子資料夾內。

下表列出I-7188(D)/512 所需的 header 和 libary。檔案放置於 lib 文件夹中。

I-7188(D)/512 Libraries

檔案

說明

lib

Required Header Files and Libraries
header file: I7188.H
library: I7188S.LIB
---------------------------------------------
Other Header Files and Libraries
If the MiniOS7 version for I-7188(D)/512 is 2.0 or later, it need using the library version 2.0 or later to link the program.
The library can be found in lib subfolder of the Demo_For_MiniOS7_v2.0 folder.
header file: i7188.h
library: 7188L.lib

範例程式適用於系統操作和 I/O 擴充

下表列出在每個編譯器資料夾中的範例程式。更多有關於各個編譯器所提供的範例程式資訊，請參閱資料夾中的 7188_DEMO.pdf 文件。

範例	說明
7521	It " s a demo program for 7521 as an addressable RS-485 to RS-232 converter.
Datetime	To read the date and time of RTC peer second and print it on monitor (user can set the date & time). XPress " q " to quit program.
Demo32	Press any key unless " q " to operation from Toucch-200 or the switches.
Demo32-1	Press any key unless " q " to operation from Toucch-200 or the switches.
Demo5	To read and write NVSRAM.
Demo6	To write, read and show the EEPROM data for check.
Demo90	It " s the demonstration for using Timer function.
Demo91	To use CountDownTimer channel 0 for LED ON/OFF XPress " q " to quit program.
Demo92	To use StopWatch channel 0 for led ON/OFF. XPress " q " to quit program.
Demo96	To use User timer function for 5DigitLed. XPress " q " to quit program.
Demo97	To use DelayMs function for LED ON/OFF. XPress " q " to quit program.
Demo98	To use I-7188 timer function to send/receive data to or from 7000's modules.
Echo485	To use echo485 to (1) monitor data on RS485, (2) send command to 7000's XPress " /q " to quit program.
Echocom	To use com4 port for creating a connection from pc and 7188 to control the 7060. XPress " /q " to quit program.
Echocom1	To use com1 port for creating a connection from pc and 7188 to control the 7060. XPress " /q " to quit program.
Eeprom	To write a value to EEPROM and show it on monitor.
Eeprom-r	Reading the data you wrote to EEPROM.
Eeprom-w	To input a value to write to EEPROM block 1 peer address (value will auto-plus 1).
File	To get the file that is wrote to the flash memory.
Flash	To read, write and erase Flash memory.
Flash-r	To read the value that is wrote to the flash memory. XPress " q " to quit program.
Flash-w	To input a value write in flash memory (value will auto-plus 1). XPress " q " to quit program.
Hello	Detecting if the operation system is Minios7.
Hello1	Detecting if the operation system is Minios7.
Hello2	Detecting if the operation system is Minios7.
Led	The led of 7188 will glitter peer second. XPress " q " to quit program.
Nvram-r	To read the value that is wrote to NVRAM.
Nvram-w	To write a value to NVRAM (value will auto-plus 1).
Readfile	You can choose a file that is already wrote in flash memory and read it. XPress " q " to quit program.
Rsttime	To press string " reset " and key “ 」“, then the 7188 will start to count time. XPress " q " to quit program.
Runprog	To use Ungetch() to run another program. XPress " q " to quit program.
Scanf	To show how to write a function for inputting data.
Seg7led	The first digital led will display 1 to f until you press " q " , and the others will show the same number with the key you press. (Even is with dot; odd is not) XPress " q " to quit program.
Serial	To get the serial number of 7188.
Test7050	The led of 7050 will glitter peer second. XPress " q " to quit program.
Test7060	The led of 7060 will glitter peer second. XPress " q " to quit program.
Test7067	The led of 7067 will glitter peer. XPress " q " to quit program.
Watchdog	If system is reset by watchdog timer, then load this file and run it.

I-7188XA(D)

檔案

檔案名稱

發行日

大小

下載

7188XA_Demo.zip

2020/05/14

1.3 MB

檔案結構

本資料夾有一 7188XA_DemoList.htm 資料檔，該檔案提供各範例說明。範例依據編譯器各別提供並分類放置於子資料夾內。

範例程式適用於系統操作和 I/O 擴充

下表列出在每個編譯器資料夾中的範例程式。更多有關於各個編譯器所提供的範例程式資訊，請參閱資料夾中的 7188XA_DemoList.htm 文件。

檔案	範例	說明
Hello	Hello_C	Detecting if the operation system is Minios7. Note: MSC don't support C++. Hello _ C ++ is only supported by BC.
Hello	Hello_C++
COM_Ports	C_Style_IO	1. Show how to write a function for input data. 2. To get a string. 3. To use C function: sscanf,or just use Scanf().
	Receive	Receive COM Port
	Slv_COM	PC sends commands to I-7188, and get back responses. And shows how to use another COM port or LED to show information to help you debug your program.
	ToCom_In_Out	To Read/Write the byte data via COM port.
Date Time	-	To read the date and time of RTC peer second and print it on monitor (user can set the date and time).
IO_PIN	-	The program will send DOx High or Low, and DIx will also read High or Low.
LED	Led	To use DelayMs function for LED ON/OFF.
LED	Seg7led	To control red led and 7-segment display.
FILE	Config_1_Basic	In many applications, users need one text file to record some information and the program can read it. You can use FSeek to get specific information in text files.
	Config_2_Advanced	To extend config_1_Basic, and add GetProFileInt, GetProFileFloat, GetProFileStr. You can use these functions to discriminate "Type" from text files.
	WriteFile	write and build a file to flash.
Memory	Demo5	To read and write NVSRAM.
	EEPROM	To read and write NVSRAM.
	EEPROM-r	Reading the data you wrote to EEPROM.
	EEPROM-w	To input a value to write to EEPROM block 1 peer address (value will auto-plus 1).
	Flash	To read, write and erase Flash memory.
	Flash-r	To read the value that is wrote to the flash memory.
	Flash-w	To input a value wrote in flash memory (value will auto-plus 1).
	NVRAM-r	To read the value that is wrote to NVRAM.
	NVRAM-w	To write a value to NVRAM (value will auto-plus 1).
	Top-Mem	Demonstration for function: AllocateTopMemory()
Misc	Reset	Restore initial value.
	Runprog	To use Ungetch() to run another program.
	SerialNumber	To get serial number of 7188.
	Watchdog	If system is reset by watchdog timer, then load this file and run it.
7K87K_Module	7K87K_demo_for_com	User can use com2 to connect and control 7k or 87k modules.
	7K87K_AI_for_Com
	7K87K_DI_for_Com
	7K87K_DIO_for_Com
	7K87K_DO_for_Com
	AO_024_for_Com
	AO_22_26_for_Com
PWR_save	-	Demo for how to use CPU's power save mode. Note: PWR_save2.C is only supported by BC.
Timer	Demo90	It’s the demonstration for using Timer function.
	Demo91	To use CountDownTimer channel 0 for LED ON/OFF.
	Demo92	To use StopWatch channel 0 for led ON/OFF.
	Demo96	To use User timer function for 5DigitLed.
	Demo97	To use DelayMs function for LED ON/OFF.
	Demo98	To use I-7188 timer function to send/receive data to or from 7000's modules.
XBoard	-	Demo programs for all I/O expansion boards which is suitable for the i-7188XA controller.

I-7188XB(D)-512

檔案

檔案名稱

發行日

大小

下載

7188XB_Demo.zip

2024/07/31

1.4 MB

檔案結構

本資料夾有一 7188XB_DemoList.htm 資料檔，該檔案提供各範例說明。範例依據編譯器各別提供並分類放置於子資料夾內。

範例程式適用於系統操作和 I/O 擴充

下表列出在每個編譯器資料夾中的範例程式。更多有關於各個編譯器所提供的範例程式資訊，請參閱資料夾中的 7188XB_DemoList.htm 文件。

檔案	範例	說明
Hello	Hello_C	Detecting if the operation system is Minios7. Note: MSC don't support C++. Hello _ C ++ is only supported by BC.
Hello	Hello_C++
COM_Ports	C_Style_IO	1. Show how to write a function for input data. 2. To get a string. 3. To use C function: sscanf,or just use Scanf().
	Receive	Receive COM Port
	Slv_COM	PC sends commands to I-7188, and get back responses. And shows how to use another COM port or LED to show information to help you debug your program.
	ToCom_In_Out	To Read/Write the byte data via COM port.
Date Time	-	To read the date and time of RTC peer second and print it on monitor (user can set the date and time).
IO_PIN	-	The program will send DOx High or Low, and DIx will also read High or Low.
LED	Led	To use DelayMs function for LED ON/OFF.
LED	Seg7led	To control red led and 7-segment display.
FILE	Config_1_Basic	In many applications, users need one text file to record some information and the program can read it. You can use FSeek to get specific information in text files.
	Config_2_Advanced	To extend config_1_Basic, and add GetProFileInt, GetProFileFloat, GetProFileStr. You can use these functions to discriminate "Type" from text files.
	WriteFile	write and build a file to flash.
Memory	Demo5	To read and write NVSRAM.
	EEPROM	To read and write NVSRAM.
	EEPROM-r	Reading the data you wrote to EEPROM.
	EEPROM-w	To input a value to write to EEPROM block 1 peer address (value will auto-plus 1).
	Flash	To read, write and erase Flash memory.
	Flash-r	To read the value that is wrote to the flash memory.
	Flash-w	To input a value wrote in flash memory (value will auto-plus 1).
	NVRAM-r	To read the value that is wrote to NVRAM.
	NVRAM-w	To write a value to NVRAM (value will auto-plus 1).
	Top-Mem	Demonstration for function: AllocateTopMemory()
Misc	Reset	Restore initial value.
	Runprog	To use Ungetch() to run another program.
	SerialNumber	To get serial number of 7188.
	Watchdog	If system is reset by watchdog timer, then load this file and run it.
7K87K_Module	7K87K_demo_for_com	User can use com2 to connect and control 7k or 87k modules.
	7K87K_AI_for_Com
	7K87K_DI_for_Com
	7K87K_DIO_for_Com
	7K87K_DO_for_Com
	AO_024_for_Com
	AO_22_26_for_Com
Timer	Demo90	It’s the demonstration for using Timer function.
	Demo91	To use CountDownTimer channel 0 for LED ON/OFF.
	Demo92	To use StopWatch channel 0 for led ON/OFF.
	Demo96	To use User timer function for 5DigitLed.
	Demo97	To use DelayMs function for LED ON/OFF.
	Demo98	To use I-7188 timer function to send/receive data to or from 7000's modules.
XBoard	-	Demo programs for all I/O expansion boards which is suitable for the i-7188XB controller.

I-7188XC(D)-512 和 I-7188XC(D)/512/RTC

檔案

檔案名稱

發行日

大小

下載

7188XC_Demo.zip

2020/05/14

1.3 MB

檔案結構

本資料夾有一 7188XC_DemoList.htm 資料檔，該檔案提供各範例說明。範例依據編譯器各別提供並分類放置於子資料夾內。

範例程式適用於系統操作和 I/O 擴充

下表列出在每個編譯器資料夾中的範例程式。更多有關於各個編譯器所提供的範例程式資訊，請參閱資料夾中的 7188XC_DemoList.htm 文件。

檔案	範例	說明
Hello	Hello_C	Detecting if the operation system is Minios7. Note: MSC don't support C++. Hello _ C ++ is only supported by BC.
Hello	Hello_C++
COM_Ports	C_Style_IO	1. Show how to write a function for input data. 2. To get a string. 3. To use C function: sscanf,or just use Scanf().
	Receive	Receive COM Port
	Slv_COM	PC sends commands to I-7188, and get back responses. And shows how to use another COM port or LED to show information to help you debug your program.
	ToCom_In_Out	To Read/Write the byte data via COM port.
Date Time	-	To read the date and time of RTC peer second and print it on monitor (user can set the date and time).
IO_PIN	-	The program will send DOx High or Low, and DIx will also read High or Low.
LED	Led	To use DelayMs function for LED ON/OFF.
LED	Seg7led	To control red led and 7-segment display.
FILE	Config_1_Basic	In many applications, users need one text file to record some information and the program can read it. You can use FSeek to get specific information in text files.
	Config_2_Advanced	To extend config_1_Basic, and add GetProFileInt, GetProFileFloat, GetProFileStr. You can use these functions to discriminate "Type" from text files.
	WriteFile	write and build a file to flash.
Memory	Demo5	To read and write NVSRAM.
	EEPROM	To read and write NVSRAM.
	EEPROM-r	Reading the data you wrote to EEPROM.
	EEPROM-w	To input a value to write to EEPROM block 1 peer address (value will auto-plus 1).
	Flash	To read, write and erase Flash memory.
	Flash-r	To read the value that is wrote to the flash memory.
	Flash-w	To input a value wrote in flash memory (value will auto-plus 1).
	NVRAM-r	To read the value that is wrote to NVRAM.
	NVRAM-w	To write a value to NVRAM (value will auto-plus 1).
	Top-Mem	Demonstration for function: AllocateTopMemory()
Misc	Reset	Restore initial value.
	Runprog	To use Ungetch() to run another program.
	SerialNumber	To get serial number of 7188.
	Watchdog	If system is reset by watchdog timer, then load this file and run it.
7K87K_Module	7K87K_demo_for_com	User can use com2 to connect and control 7k or 87k modules.
	7K87K_AI_for_Com
	7K87K_DI_for_Com
	7K87K_DIO_for_Com
	7K87K_DO_for_Com
	AO_024_for_Com
	AO_22_26_for_Com
Timer	Demo90	It’s the demonstration for using Timer function.
	Demo91	To use CountDownTimer channel 0 for LED ON/OFF.
	Demo92	To use StopWatch channel 0 for led ON/OFF.
	Demo96	To use User timer function for 5DigitLed.
	Demo97	To use DelayMs function for LED ON/OFF.
	Demo98	To use I-7188 timer function to send/receive data to or from 7000's modules.
XBoard	-	Demo programs for all I/O expansion boards which is suitable for the i-7188XC controller.

檔案中心

產品相關

PACTECH 技術期刊

型錄/廣告文宣/海報

合作夥伴專區

I-7188

I-7188(D)/512

檔案結構

I-7188(D)/512 Libraries

範例程式適用於系統操作和 I/O 擴充

I-7188XA(D)

檔案結構

範例程式適用於系統操作和 I/O 擴充

I-7188XB(D)-512

檔案結構

範例程式適用於系統操作和 I/O 擴充

I-7188XC(D)-512 和 I-7188XC(D)/512/RTC

檔案結構

範例程式適用於系統操作和 I/O 擴充

相關資源