| Digital Input |
| Input Channels |
6 |
| Input Type |
Isolation, Wet contact (Sink/Source) |
| Input level |
On Voltage Level: +3.5 VDC ~ +30 VDC |
| Off Voltage Level: +1 VDC max. |
| Input Impedance |
3 kohm, 0.33 W |
| Counter |
Channels: 6 |
| Max. Counts : 16-bit (65535) |
| Max. Input Frequency: 100 Hz |
| Min. Pulse Width: 5 ms |
| Relay Output |
| Output Channels |
4 |
| Output Type |
Power Relay, Form A |
| Contact Rating |
( 250 VAC/30 VDC) @ 5 A |
| Max. Contact voltage |
270 VAC/125 VDC |
| Operate Time |
10 ms max. at rated voltage |
| Release Time |
5 ms max. at rated voltage |
| Endurance |
Electrically |
Resistive load: 100,000ops. min. (10 ops/minute) |
| Mechanically |
At no load: 20,000,000ops. min. (300 ops/minute) |
| Dielectric Strength |
Between contacts |
750 VAC for 1 minute |
| Between coil to contacts |
3,000 VAC for 1 minute |
| Insulation Resistance |
5,080 V (1.2 / 50us) |
| Surge Strength |
5ms max. at rated voltage |
| ESD Protection |
4 kV contact for each terminal |
| LED Display |
| 1 LED as Power Indicator |
| 1 LED as Zigbee Communication Indicator |
| 10 LEDs as Digital Input and Output Indicators |
| Communication Interface |
| Wireless |
ZigBee, IEEE 802.15.4 Standand |
| Antenna |
2.4 GHz-3 dBi Omni-Directional antenna |
| Protocols |
Supports DCON and ModBus RTU Protocols |
| Hot Swap |
By Rotary and DIP Switch |
| Power |
| Required Supply Voltage |
+10 to +30 VDC |
| Power Consumption |
1.2 W max. |
| EFT Protection |
+/- 4 kV to Power |
| Surge Protection |
+/- 3 kV to Power |
| Dimensions |
| Case |
Plastic |
| Flammability |
UL 94V-0 materials |
| Dimensions |
33 mm x 107 mm x 78 mm (W x H x D) |
| Installation |
DIN-Rail |
| Environment |
| Operating Temperature |
-25 ¢XC ~ +75 ¢XC |
| Storage Temperature |
-30 ¢XC ~ +75 ¢XC |
| Relative Humidity |
5% ~ 95% RH, Non-condensing |
