New products

New Product: WF-2019
Wi-Fi I/O Module, 10-channel Universal Analog Input

The WF-2019 is a 10-channel universal analog input module with voltage and current input types. It provides extremely accurate thermocouple measurement and automatically cold-junction compensation for each channel. In addition, the WF-2019 has WLAN connection complies with the IEEE802.11b/g standards. With the popularity of 802.11 network infrastructure, the WF-2019 makes an easy way to incorporate wireless connectivity into monitoring and control systems......more

New product:iP-8811-MRTU, iP-8411-MRTU
Modbus RTU I/O Expansion Unit

iP-8000-MRTU series is a Modbus serial I/O expansion unit to expand I-8K and I-87K series I/O modules over the serial port for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules......more

New release

M2M RTU Center Version 1.1 has been released: Support up to 1024 RTU devices

M2M RTU Center is the software to manage ICP DAS RTU devices (GT-540 series, G-4500 RTU). It can help users to establish the remote monitor system easily and quickly. Users can monitor the Modbus RTU devices, and that with built-in I/Os, via 2G/3G network. Besides, based on the devices with GPS function(such as GT-540P, G-4500P series), you could make GPS tracker system easily......more

Applications

Energy Storage System
This system can improve the usage efficiency of the electrical power. During the off-peak time of the electricity use, the unused electricity can be stored in the battery. When the peak time is coming, these batteries supply the power to the electric grid. The customer utilizes one of the I-8120Ws in VP-25W1 to monitor the battery status, and another is used to feedback these data to the XP-8341. The XP-8341 transmits the status to the PC via Ethernet and control the charge time by the breaker. (more...)

Petrochemical GAS Pressure Detection System
The conveying pipes are everywhere in the petrochemical plants, and used for conveying the variety liquids and gases which may be poison and flammable. The situations of these liquids and gas must be presented and handled in the control center. The customer uses the WP-8841 with the touch screen to be the HMI and control system. On the WP-8441, there is an I-8064W and an I-87H17W. The I-87H17W is a HART AI module, and is applied for received the 8 ABB pressure transmitters which monitors the gas pressure through the pipes. This control system not only displays the gas pressure on the touch screen directly, but triggers the alarm while the gas pressure exceed the upper limitation.(more...)