HART
    I-87H17W
 
Applications
 
Features
 
Hardware Specifications
 
Ordering Information
 
Optional Accessories
 
Related Products
    HART
 
Introduction Page
     

 
 
       
 


I-87H17W
~ NEW ~
8-channel HART Current input Module
 
     
 

The I-87H17W is a HART analog input module. It can measures 4~20mA current and acts as a HART master, allowing communication with HART field devices. Its user-friendly design saves a lot of work when measuring current due to a built-in resistor. Now, users can measure current directly without any external resistor. The baud rate of I-87H17W is changeable and supports DCON protocol. Otherwise, ICP DAS also provides API library for users to develop their own program by VC,VB , C# or VB.Net environment.

  
 
 
   
 

Current Measuring, Petrochemical Industry Application, Environment Monitoring, Tunnel Monitoring, Building Monitoring etc.
   
 
 
     
 
  • Analog input capability with or without HART
  • Real-time HART data acquisition
  • Full read/write access to all device information
  • Support 4 ~ 20 mA current input
  • 2 or 4 wire transmitters of HART
  • With a built-in resistor
  • Open wire detection
  • 4 kV ESD protection
  • 2500 VDC intra-module isolation
  • Built-in Watchdog
  • RoHS compliance
  • Support DCON Protocol
  • Provide API library and demos
  • Support XPAC, WinPAC, I-87Kx,RU-87Px, USB-87Px, ET-87Px series
 
     
 
 
 
     
 
Analog Input
Input Channels
8 Differential 4-20 mA input channels
HART Wiring
2 or 4 wire transmitters
HART Response Time
1s per single channel
Input Type
4~20mA
Resolution
16-bit
Zero Drift
+/- 20£gV/ ¢XC
Span Drift
+/- 25£gV / ¢XC
Common Mode Rejection
86 dB
Normal Mode Rejection
100 dB
Input Impedance
400 Ohms
Common Voltage
-200V to +200V
Open Wire Detection
Yes
4KV ESD Protection
Yes, Contact for each terminal.
Intra-module Isolation, Field to Logic
2500VDC
Interface
Interface
RS-485
Format
N81, N82, E81, O81
Baud Rate
1200 ~ 115200bps
Watchdog
Dual Watchdog
Yes, Module(1.6 sec) and Communication(Programable)
LED
LED Display
1 LED as Power Indicator
8 LED as HART Communication Indicator
Power
Power Consumption
Maximum : 1.8W
Mechanism
Dimensions
30mm x 102mm x 115mm(W x L x H) Detail
Environment
Operating Temperature
-25 to 75 ¢XC
Storage Temperature
-30 to 75 ¢XC
Humidity
5 to 95% RH, non-condensing
 
     
 
 
 
     
 
I-87H17W
8-channel HART Current Input Module (Gray Cover) (RoHS)
 
     
 
 
 
     
 
I/O Connector Block with DIN-Rail Moun ting and 37-pin D-sub Connector (pitch:5.08mm)
I/O Connector Block with DIN-Rail Moun ting and 37-pin D-sub Connector (pitch:3.81mm)
Male-Female D-sub cable 0.5 M
Male-Female D-sub cable 1 M
Male-Female D-sub cable 1.5 M
 
     
 
 
 
     
 
USB, RS-232, Fiber Optical to RS-485 Converters and Repeaters
24 VDC power supply
External relay modules for I-7000 DO module
Beginner learning kit
Application books designed with our products
 
     
   
Copyright© ICP DAS Co., Ltd. All Rights Reserved