Energy Management
Introduction
Why ICP DAS
Applications
The classification of and access to electricity consumption information is defined here as the monitoring of production equipment, motors, pumps, refrigerating and air-conditioning, air compressors, heating equipment, and lighting to obtain electricity consumption information and status of each circuit, and the automatically generation of reports by the system, from which the information and status can be further integrated with an MES and/or ERP system to precisely calculate the unit cost of the electricity consumption. This information can also be further used as the basis for the improvement of equipment processes and preventive maintenance.
Improve Remote Monitoring and Reliability of EV Charging Piles with ICP DAS Intelligent CAN Bridge
ICP DAS I-2533 series CAN/CAN FD to Multi-mode/Single-mode Fiber Bridge receives data from electric vehicle (EV) charging infrastructure through the CAN bus and extends the communication distance via fiber optics. Subsequently, the I-2533 series transmits the data to the PISO-CAN200U series PCI Card, which the central controller is equipped with, using the CAN bus....
Application of ICP DAS’s Solutions for Energy Management in Panel Display Manufacturing
The ICP DAS‘s PM-3000 series smart power meters allow users to transmit AC current data from the inverter to the PMC series power meter concentrators via the Modbus RTU communication protocol. Then, through Ethernet, the received data can be easily sent to the control center via Modbus TCP communication protocol, thus realizing power management and achieving the goal of preventive maintenance.
Tracking Carbon Footprint in Manufacturing with ICP DAS’s Environment and Energy Management Solution
Users can collect information about the electricity consumption of factories and equipment with the ICP DAS‘s three-phase smart power meter PM-3000 series and the IIoT power meter concentrator PMC-5231. The smart power meter and power meter concentrator can also be used in conjunction with ICP DAS‘s air sensor modules to obtain temperature, humidity, and PM concentration data...etc。
Energy Monitoring with Predictive Maintenance at a Palm Oil Mill Plant in Thailand
To help our client acquire power consumption data on the motors, ICP DAS utilized the three-phase smart power meters (PM-3133-360P), together with the IIoT power meter concentrator (PMC-5231) to acquire the motors’ electric data. Later on, the electricity information could.......
Industrial IoT Power Meter Concentrator – PMC-5200 series
Industry 4.0 is based on the Internet of Things (IoT) that incorporates the technological concept of communicating and exchanging information between all facilities and has brought the manufacturing industry to a new era. The PMC-5200 series Industrial IoT Power Meter Concentrators developed by ICP DAS is a perfect starting point to facilitate the vision of energy monitoring and management......
PMD-2201 Power Meter Concentrator with a Touch Panel Display
The PMD-2201 (Power Meter Concentrator with Display) offers an onsite display and a remote web page that can be used to display power information together with interfaces to configure the system settings. This helps those personnel in charge of the power monitoring system to view power consumption information from remote devices in real time via either the LCD touch panel or the web page......
New Generation of Power Management Solutions
ICP DAS provides total-solution products for the second phase, measurement and analysis, providing products from power meters for measurement to power meter concentrators for data logging and report analysis. The solution is comprehensive and easy to use, and can save time and cost in system planning and implementation. It is flexible so that you can freely add or remove power meters......
- Monitoring begins once electricity is delivered to the factory from the power company.
- Monitoring the Transformer in the substation in the plant with consideration to power safety.
- Monitoring whether the efficiency of energy utilization within the entire plant achieves a loop balance, which is a major concern for those factory owners who really care about the price of electricity. In those situations, they would relatively concerned about whether the contract capacity exceeds the contract, and whether the power factor (PF) achieves the balance.
One of the most important indicators when monitoring electrical power quality is the Harmonics. If the harmonics seriously pollute the power system, it may not only affect the quality of the power supply within the system, but also damage the electrical power equipment, or affect the normal operation of the equipment.
A tailored solution to achieve power measurement & energy efficiency by monitoring mask aligners
ICP DAS’s voltage attenuator & current transformer DNM-831I-100V-50A, 8-channel True RMS Input Module M-7017RMS-G, and Power Meter Concentrator PMC-5231 were employed to measure power consumption and obtain data from mask aligners. The data collected serve as a reference for the predictive maintenance of machines......
ICP DAS believes that our professional, stable and mature electric power measurement series of products are the best choices for those involved the industry to help understand their real needs from a practical point of view, whether the source of their needs is the origin of the power, such as the monitoring of power generation efficiency and the power quality of power plants, or whether the source is from the real-time monitoring of data related to wind turbines, communication solutions following the collection of data from an offshore wind farm, the monitoring of conversion efficiency of green energy from resources such as wind or solar power generation systems, the transformation of voltage or current, the monitoring of energy stations and energy cabinets, or the acquisition of other data related to electric power, and more.
Zhangbei National Wind and Solar Energy Storage and Transmission Demonstration Project (China)
As the world’s largest battery energy storage station at present, the Zhangbei National Wind and Solar Energy Storage and Transmission Demonstration Project—a project in Zhangbei, Hebei Province, China, has implemented the world’s first ever construction concept and technical route for wind and solar energy storage and transmission. The model is a new energy comprehensive demonstration project ......
ICP DAS’s Cloud Data Visualization Solution for Solar Power Plant Monitoring (Phuket, Thailand)
ICP DAS‘s WISE series IIoT edge controllers collect data from solar power plants located in Phuket, Thailand, and its surrounding 32 outlying islands. The data is then transmitted to a control center in Phuket via a 4G wireless connection and managed with the IoTstar software developed by ICP DAS. This software can easily monitor and manage the status of solar power plants remotely, ....
