ICP DAS

Product FAQ

Search for Subjects

SUBJECT

VIEWS

FAQ TYPE

MODEL

LAST UPDATED

DETAIL

I-7540D-G / I-7540DM / I-7540D-UTA-G / I-7540DM-UTA FAQ

82

Troubleshooting

I-7540DM-UTA

2021-09-29

NO.	Subject
Q01	How do I configure the Ethernet parameters, COM parameters and CAN bus parameters of I-7540D ?
Q02	How does these two parameter, Acceptance Code and Acceptance Mask, work in I-7540D?
Q03	How to send/receive CAN messages to/from I-7540D ?
Q04	How to configure I-7540D through TCP/IP protocol?
Q05	How do I know the I-7540D works correctly ?
Q06	How to update the firmware of I-7540D ?
Q07	Does I-7540D support VxComm technology?
Q08	How to set up the module to the default settings?
Q09	I've got a problem with i-7540-D. I can\'t set the DHCP listening function to 0. Even if i reset the system with MiniOS7, it's always set to 1.
Q10	After power down and up, module has changed its IP addr itself to the 72.30.7.0. It is possible to ping it but no way to connect via I-7540 utlility.
Q11	How many time passed when a message sent by the computer to I7540-D Ethernet port is present in the CAN bus?
Q12	We would like to get a 'copy' of the CAN bus traffic sent to the Linux machine through the TCP/IP connection. Do we need the OS7 miniOS, how do we configure the port number, etc?
Q13	Can I connect 3 CAN Devices into one Ethernet Network using 3 I-7540D? One of them is configured as TCP/IP Server, the 2 others as TCP/IP Client, directed to the server?
Q14	When CAN bus off, the CAN bus of I-7540D does not recover by itself.
Q15	When I-7540D sent CAN messages with 10Kbps CAN baud rate via using “polling send”, the module reboots continually.
Q16	Can the higher priority CAN ID be sent first after the I-7540D received.
Q17	How to develop the application program of the I-7540D?
Q18	Does the I-7540D provide Labview driver?
Q19	Does the I-7540D support RP-1210?