ICP DAS

Repeater

Search for Subjects

SUBJECT

VIEWS

FAQ TYPE

MODEL

LAST UPDATED

DETAIL

I-7531-FD-G FAQ

15

Troubleshooting

2022-11-30

NO.	Subject
Q01	What is the difference between I-7531-G and I-7531-FD-G? How should users choose?
Q02	When the CAN signal is repeated through I-7531-FD-G, how much communication distance can be extended?
Q03	How many CAN nodes can the I-7531-FD-G drive?
Q04	How to set or customize CAN baud rate for I-7531-FD-G?

I-7532-G FAQ

22

Troubleshooting

2020-04-20

NO.	Subject
Q01	How to use other CAN converter to set I-7532 CAN‐ID Filter and Mapping setting?

I-7531-G / I-7531-UT-G FAQ

24

Troubleshooting

2020-04-20

NO.	Subject
Q01	How long the maximum length of the CAN bus which can be used with I‐7531 module?
Q02	Is the I‐7531 certified by UL? What is the insulation resistance of I‐7531?
Q03	What is the message buffer size of I‐7531 and how faster does I‐7531 repeat the message from another port after receiving?
Q04	Could the I‐7531 configure filter and filter out necessary CAN ID?

I-2534 / I-5534-M FAQ

24

Troubleshooting

2021-11-04

NO.	Subject
Q01	What is the maximum FPS of the I-2534?
Q02	How to implement the 6 ports CAN switch with the I-2534?
Q03	How to manage reduce the data flow in 12 ports CAN switch?
Q04	How much delay time does the I-2534 take?
Q05	How to divide one CAN network into two groups with I-2534 module?
Q06	How to configure CAN 1 as input and CAN 2, 3, 4 as output within I-2534 module?
Q07	If I only connect the I-2534’s CAN 1 & 2 and CAN 3 & 4 is open, it will work fine between CAN 1 & 2 ?
Q08	How to build robust and flow controlled CAN network?
Q09	Update Firmware fail?
Q10	What is the MTBF of the I-5534-M?
Q11	Does the I-5534-M could extend CAN bus length?