SUPPORT - ICP DAS

I/O Module

Search for Subjects

SUBJECT

VIEWS

FAQ TYPE

MODEL

LAST UPDATED

DETAIL

CAN-2088C FAQ

25

Troubleshooting

2025-12-30

NO.	Subject
Q1	Does CAN-2088C have function to 120-degree angle of the three-phase PWM output?
Q2	Does CAN-2088C have a signal function using the outputs that a count is reached?
Q3	Do counters of CAN-2088C have minimum on/off times set?
Q4	How much delay of CAN-2088C from hardware input trigger to PWM output?
Q5	Can PWM output of CAN-2088C be with load current up to 1A ~ 2A?
Q6	Does CAN-2088C can output PWM to motor and get encoder data with CAN-2088C counter?
Q7	How to set the Duty cycle of CAN-2088C?
Q8	Do I have to send the PDO message module all the time to have output?

CAN-2024C FAQ

12

Troubleshooting

2020-04-21

NO.	Subject
Q1	How much is the response time of CAN-2024C AO?

CAN-2000C FAQ

83

Troubleshooting

2025-12-30

NO.	Subject
Q1	When I set PDO Event Timer to let PDO message auto responses per 1 second and it really work. But if I reboot the CANopen slave module and the setting would gone. How can I save this configuration?
Q2	How can I update the firmware on my CAN-2000C module?
Q3	Why can't I communicate with CAN-2000C serial modules by using CANopen master which is not provided by ICPDAS? At the same time, the ERR LED of CAN-2000C modules is blinking continuously.
Q4	Are the plastic materials of CAN-2000 series REACH certified? Are CAN-2000 series UL certified?
Q5	What is the weight of CAN-2000 series? Is there STEP file available?
Q6	Is there any demo program about how to use CAN-2000C series?
Q7	How to modify the mapped objects in the range 0x1600~0x1609 / 0x1A00~0x1A09?