home > product> solutions > pc based i/o board > pci selection > PEX-730A/PISO-730AU/PISO-730AU-5V

home > product> solutions > pc based i/o board > Introduction > PEX-730A/PISO-730AU/PISO-730AU-5V

PEX-730A/PISO-730AU/PISO-730AU-5V
32-channel Isolated Digital I/O and 32-channel TTL Digital I/O Board (Current Sourcing)

~ NEW ~	~ NEW ~

Model: PISO-730AU/PISO-730AU-5V	Model: PEX-730A


Support the +3.3 V/+ 5 V PCI bus for PISO-730AU/730AU-5V Support PCI Express x1 for PEX-730A 16-channel Optically-isolated Digital Input 16-channel Optically-isolated Digital Output (Source, PNP) 16-channel 5 V/TTL Digital Output 16-channel 5 V/TTL Digital Input 3750 Vrms photo-isolation protection Interrupt source: 2 channels Output status readback function Card ID function

The PEX-730A and PISO-730AU/730AU-5V card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The PISO-730AU card is designed as a drop-in replacement for the PISO-730A, while the PEX-730A card is designed as easy replacement for the PISO-730A. Users can replace the PISO-730A by the PEX-730A and PISO-730AU directly without software/driver modification.

PEX-730A, PISO-730A and PISO-730AU(-5V) cards provide 32 isolated Digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level Dgital I/O channels (16 x DI and 16 x DO). Both the isolated DI and DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, the DIO channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltage spikes. Each Digital Output includes a PNP transistor and integral suppression diode for the inductive load. The open-collector Digital Output channels are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc.

PEX-730A and PISO-730AU(-5V) cards also adds a Card ID switch on board. Users can set Card ID on a board so that the board can be recognized by the ID via software when using two or more cards in one computer.

These cards support various OS versions, such as Linux, DOS and 32/64-bit Windows 10/8/7/2008/2003/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

Factory automation
Product test
Laboratory automation

DOS Lib and TC/BC/MSC sample program (with source codes)
DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.
LabVIEW toolkit for Windows.
Driver for Linux.

Model Name	PEX-730A	PISO-730AU	PISO-730AU-5V
Isolated Digital Input
Isolation Voltage	3750 Vrms
Channels	16
Compatibility	Optical
Output Voltage	Logic 0: 0 ~ 1 V Logic 1: 9 ~ 24 V (Logic 1: Min. 7 V; Max. 30 V)		Logic 0: 0 ~ 1 V Logic 1: 5 ~ 12 V (Logic 1: Min. 3.5 V; Max. 16 V)
Input Impedance	1.2 KΩ, 1 W
Response Speed	4 kHz (Typical)
Isolated Digital Output
Isolation Voltage	3750 Vrms
Channels	16
Compatibility	Source (PNP), Open Collector
Output Capability	100 mA/+30 V for each channel @ 100% duty
Response Speed	4 kHz (Typical)
Non-isolated Digital Input
Channels	16
Compatibility	5V/TTL
Input Voltage	Logic 0: 0.8 V max. Logic 1: 2.0 V min.
Response Speed	500 kHz	1.2 MHz (Typical)
Non-isolated Digital Output
Channels	16
Compatibility	5V/TTL
Output Voltage	Logic 0: 0.4 V max. Logic 1: 2.4 V min.
Output Capability	Sink: 2.4 mA @ 0.8 V Source: 0.8 mA @ 2.0 V
Response Speed	500 kHz	1.2 MHz (Typical)
General
Bus Type	PCI Express x 1	3.3 V/5 V Universal PCI, 32-bit, 33 MHz
Data Bus	8-bit
Card ID	Yes (4-bit)	Yes (4-bit)
I/O Connector	Female DB37 x 1 20-pin box header x 2
Dimensions (L x W)	163 mm x 110 mm	163.68 mm x 105.06 mm
Power Consumption	350 mA @ +3.3 V 250 mA @ +12 V	640 mA @ +5 V
Operating Temperature	0 ~ 60 °C
Storage Temperature	-20 ~ 70 °C
Humidity	5 ~ 85% RH, non-condensing

PEX-730A CR	PCI Express, 32-channel isolated digital I/O & 32-channel TTL digital I/O board. (current sourcing) (RoHS) Includes one CA-4002 D-Sub connector.
PISO-730AU CR	Universal PCI Bus, 32-channel isolated digital I/O & 32-channel TTL digital I/O board. (current sourcing) (RoHS) Includes one CA-4002 D-Sub connector.
PISO-730AU-5V CR	Universal PCI Bus, 32-channel isolated digital I/O (Input Logic High: 5~12 V) & 32-channel TTL digital I/O board. (current sourcing) (RoHS) Includes one CA-4002 D-Sub connector.

CA-2002	20-pin flat cable,20 cm x 2
CA-2010	20-pin flat cable,1 M
CA-2020	20-pin flat cable 2 M
CA-3710	DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°))
CA-3710D	DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°))
CA-3715DM-H	DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS)
CA-3730DM-H	DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS)
CA-3750DM	DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)
CA-3750DM-H	DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)
CA-4002	37-pin Male D-sub connector with plastic cover.
DB-37	Directly connect signal to D-sub 37-pin connector
DN-37	DIN Rail Mounting 37-pin Connector
DN-20	Two 20-pin header DIN-rail terminal board
DN-20/N	DN-20 without DIN-Rail mount.
DB-16P	16-channel isolated D/I board
DB-16R	16-channel relay board
ADP-20/PCI	20-pin extender

I/O Card Main Page

|