home > product> solutions > pc based i/o board > Introduction > PEX-730/PISO-730U/PISO-730U-5V
 
PEX-730/PISO-730U/PISO-730U-5V
PCI Express/Universal PCI, 32-channel Isolated Digital I/O and 32-channel TTL Digital I/O Board (Current Sinking)
   
  ~ NEW ~
Model: PISO-730U/PISO-730U-5V Model: PEX-730
 
  • Support the +3.3 V/+ 5 V PCI bus for PISO-730U/730U-5V
  • Support PCI Express x1 for PEX-730
  • 16-channel Optically-isolated Digital Input
  • 16-channel Optically-isolated Digital Output (Sink, NPN)
  • 16-channel 5 V/TTL Digital Output
  • 16-channel 5 V/TTL Digital Input
  • 3750 Vrms photo-isolation protection
  • Built-in DC/DC converter with 3000 VDC isolated
  • Two interrupt sources
  • Output status readback function
  • Card ID function
  • SMD, short card, power saving
  • Supports Plug & Play to obtain I/O resources
  • No more manually setting of I/O address and IRQ
 
The PEX-730 and PISO-730U/730U-5V card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The PISO-730U card is designed as a drop-in replacement for the PISO-730, while the PEX-730 card is designed as easy replacement for the PISO-730. Users can replace the PISO-730 by the PEX-730 and PISO-730U directly without software/driver modification.

PEX-730 and PISO-730U/730U-5V cards provide 32 isolated digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level digital I/O channels (16 x DI and 16 x DO). Both the isolated DI and DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, these DIO channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Each digital output offers a Darlington (NPN) transistor and integrated suppression diode for the inductive load. The open collector outputs (DO channels) are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc.

PEX-730 and PISO-730U/730U-5V cards also add a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more cards in one computer.

These cards support various OS versions, such as Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows 8/7/Vista/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.
 
  • Factory automation
  • Product test
  • Laboratory automation
 
  • DOS Lib and TC/BC/MSC sample program (with source codes).
  • DLL and OCX SDK for Windows 95/98/NT/2K.
  • DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.
  • VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.
  • LabVIEW toolkit for Windows.
  • Driver for Linux.
 
Model Name PEX-730 PISO-730U PISO-730U-5V
Isolated Digital Input
Isolation Voltage 3750 Vrms
Channels 16
Compatibility Optical
Input Voltage Logic 0: 0 ~ 1 V
Logic 1: 9 ~ 24 V
(Logic 1: Min. 7 V; Max. 30 V)		 Logic 0: 0 ~ 1 V
Logic 1: 5 ~ 12 V
(Logic 1: Min. 3.5 V; Max. 16 V)
Input Impedance 1.2 KΩ, 1 W
Response Speed 4 kHz (Typical)
Isolated Digital Output
Isolation Voltage 3750 Vrms
Channels 16
Compatibility Sink (NPN), Open Collector
Output Capability 100 mA/+30 V for each channel @ 100% duty
Response Speed 4 kHz (Typical)
Non-isolated Digital Input
Channels 16
Compatibility 5V/TTL
Input Voltage Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Response Speed 500 kHz 1.2 MHz (Typical)
Non-isolated Digital Output
Channels 16
Compatibility 5V/TTL
Output Voltage Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Output Capability Sink: 2.4 mA @ 0.8 V
Source: 0.8 mA @ 2.0 V
Response Speed 500 kHz 1.2 MHz (Typical)
General
Bus Type PCI Express x 1 3.3 V/5 V Universal PCI, 32-bit, 33 MHz
Data Bus 8-bit
Card ID Yes(4-bit)
I/O Connector Female DB37 x 1
20-pin box header x 2
Dimensions (L x W x D) 163 mm x 116 mm x 22 mm 180 mm x 105 mm x 22 mm
Power Consumption 350 mA @ +3.3 V
250 mA @ +12 V		 600 mA @ +5 V
Operating Temperature 0 ~ 60 °C
Storage Temperature -20 ~ 70 °C
Humidity 5 ~ 85% RH, non-condensing
 
PEX-730 CR PCI Express, 32-channel isolated digital I/O (Input Logic High: 9~24 V) & 32-channel TTL digital I/O board. (current sinking) (RoHS)
Includes one CA-4002 D-Sub connector.
PISO-730U CR Universal PCI Bus, 32-channel isolated digital I/O (Input Logic High: 9~24 V) & 32-channel TTL digital I/O board. (current sinking) (RoHS)
Includes one CA-4002 D-Sub connector.
PISO-730U-5V CR Universal PCI Bus, 32-channel isolated digital I/O (Input Logic High: 5~12 V) & 32-channel TTL digital I/O board. (current sinking) (RoHS)
Includes one CA-4002 D-Sub connector.
 
CA-2002 20-pin flat cable,20 cm x 2
CA-2010 20-pin flat cable,1 M
CA-2020 20-pin flat cable 2 M
CA-3710 DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°))
CA-3710D DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°))
CA-3715DM-H DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS)
CA-3730DM-H DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS)
CA-3750DM DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)
CA-3750DM-H DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)
CA-4002 37-pin Male D-sub connector with plastic cover.
DB-37 Directly connect signal to D-sub 37-pin connector
DN-37 DIN Rail Mounting 37-pin Connector
DN-20 Two 20-pin header DIN-rail terminal board
DN-20/N DN-20 without DIN-Rail mount.
DB-16P 16-channel isolated D/I board
DB-16R 16-channel relay board
ADP-20/PCI 20-pin extender
 
 
I/O Card Main Page
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player