home > product> solutions > pac > iPAC-8000 > I-8KE4-MTCP-G/I-8KE8-MTCP-G
 
I-8KE4-MTCP-G/I-8KE8-MTCP-G
Modbus/TCP I/O Unit
(Ethernet enables Modbus commands to run over TCP/IP)
 
   
I-8KE4-MTCP-G Model: I-8KE8-MTCP-G
 
I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.. Most SCADA software support Modbus communication protocol, thus users can easily and quickly integrate remote I/Os to the SCADA software as data acquisition and monitor to apply to environment monitoring, power management, factory automation, etc.
 
  • Supports IPv4
  • Supports Modbus/TCP communication protocol at Ethernet port.
  • Supports Modbus/RTU communication protocol at RS-232 port.
  • Supports 8K and 87K series DI/DO/AI/AO/Counter/Frequency modules
  • I/O configurable via the Ethernet (Using the Modbus Utility)
  • I/O scan engine
    The engine can automatically scan I/O modules plug in slots and range I/O registers address to continuous to have high-data-density registers to get best communication efficiency.
  • Support power on value and safe value for analog/digital output module.
  • Detection of I/O module communication status (online/offline).
  • The SMMI of the panel can be used to
    1. Configure the network setting (IP, Mask, Gateway)
    2. Set the offset value of AI/AO module
  • Allowed a maximum of 8 host PCs access simultaneously
  • Firmware updateable (via the RS-232 port)
  • Firmware programmable
    We provide the Modbus SDK allowing users customized the Modbus firmware.
 
The Modbus Utility package is for Windows 98/SE/2K/XP. It includes
  • Modbus Utility
    1. On-line configuration via Ethernet
    2. TO memorize the I/O setting in EEPROM
    3. Automatically generate register mapping tables
    4. Configuration export/import
    5. COM Port setting(Modbus/RTU gateway, VxComm, UpLink, Programming, Debug)
    6. show I/O value by 3 modes(Value, Dec, Hex)
    7. Analog output, digital output control
    8. Plot trend line
    9. I/O value datalog (.txt file)
    10. Power on value, safe value, WDT setting
  • MBRTU
    Modbus/RTU client (with source code in VB6) to diagnostic Modbus/RTU slave devices.
  • MBTCP
    Modbus/TCP client (with source code in VB6) to diagnostic Modbus/TCP slave devices.
 
Models I-8KE4-MTCP I-8KE8-MTCP
CPU module
CPU 80186-80 or compatible (16-bit and 80MHz)
SRAM 512 KBytes
Flash 512 KBytes
EEPROM 2 KBytes
NVRAM
RTC (real time clock)
Hardware Serial Number
Built-in Watchdog Timer Yes
Communicate Interface
COM 0 Internal communication with the 87K modules
COM 1 RS-232 (to update firmware)
COM 2
COM 3
COM 4
Ethernet Port 10BaseT NE2000 compatible
SMMI
5 - Digit LED Display Yes
3 - Programmable LED Indicators Yes
4 - Push Buttons Yes
I/O expansion slots
Slot Number 4 Slots 8 Slots
Mechanical
Dimensions 230 mm x 110 mm x 75.5 mm 354 mm x 110 mm x 75.5 mm
Environmental
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +85 °C
Humidity 5 ~ 95%,non-condensing
Power
Protection Power reverse polarity protection
3 KV power isolation Yes
Power requirement 10 ~ 30 VDC
Power supply 20 W
Power consumption 3.9 W 5.1 W
 
I-8KE4-MTCP-G 4-slots Ethernet I/O unit (Gray color)
I-8KE8-MTCP-G 8-slots Ethernet I/O unit (Gray color)
 
KA-52F AC 100 ~ 250 V input, DC 24V/1A output, flat type power supply
DIN-KA52F KA-52F with DIN-Rail mount
DP-660 24 VDC/2.5 A, 60 W and 5 VDC/0.5 A, 2.5 W Power Supply with DIN-Rail Mounting
DP-665 AC 85 ~ 270 V input, DC 24V/1.7A and 5V/0.5A output power supply
DP-1200 24 VDC/2.5 A, 60 W and 5 VDC/0.5 A, 2.5 W Power Supply with DIN-Rail Mounting
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player