CAN Bus
    I-87120
 
 
 
 
 
 
 
 
    CAN Bus
 
 
    I-8000 Series
 
     

 
 
       
 


 


I-87120 (I-87KCAN)
1 Port Programmable CAN bus communication module

   
 
     
 
CAN (Controller Area Network) is a serial bus control protocol especially suited to constrnct intelligent industry devices networks and build smart automatic control systems. It is popularly applied in the industrial automation, building automation, vehicle, marine, and embedded control network. In order to expand the CAN functions of ICPDAS products, I-87120 module is developed for this purpose. It is a kind of module, and need to be plugged into a host unit, such as I-8000 series MCU (Main Control Unit),
 
 
WinCon-8000 and LinCon-8000. I-87120 give a way to connect these ICPDAS host unit with CAN network. Owing to the features of I-8000 series MCU, WinCon-8000, WinPAC-8000 and LinCon-8000, these host units can be arranged to be a CAN converter, CAN slave device and CAN master device in a CAN network. The righr-hand-side figure shows the application architecture for I-87120 modules.
 
 
   
 
  • DeviceNet, CANopen, CAN J1939, SDS (System Wide Network) protocol application
  • CAN bus communication application.
  • Industry automation
  • Industrial Machinery
  • Building Automation
  • Food & Beverage
  • Semiconductor Fabrication
  • Control system

  •    
     
     
         
     
         
     
     
     
         

    Common Features:

    • One CAN port expansion for I-8000 series MCU (main control unit), WinCon-8000, WinPAC-8000 and LinCon-8000
    • 4096 records CAN message receive-buffer size
    • 4096 records buffer size for the command from I-8000 series MCU/ WinCon-8000/WinPAC-8000/LinCon-8000 to I-87120
    • Provide C/C++ function libraries to send and receive CAN messages
    • Demos and utility are provided
    • 3 indication LEDs (Rx, Tx and Err LEDs)

    CAN Port Features:

    • Support user-defined baud
    • 2500 Vrms isolation
    • Baud : 5Kbps, 10Kbps, 20Kbps, 25Kbps, 50Kbps, 100Kbps, 125Kbps, 200Kbps, 250Kbps, 500Kbps, 800Kbps, 1Mbps
     
     
     
       
     
    Hardware
    CPU
    80186, 80 MHz or compatible
    SRAM/Flash/EEPROM
    512 KB / 512 KB / 2 KB
    RTC (Real Time Clock)
    Yes
    CAN Interface
    Controller
    NXP SJA1000T with 16 MHz clock
    Transceiver
    NXP 82C250
    Channel number
    1
    Connector
    5-pin screwed terminal block (CAN_L, CAN_SHLD, CAN_H, N/A for others)
    Baud Rate (bps)
    10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate)
    Transmission Distance (m)
    Depend on baud rate (for example, max. 1000 m at 50 kbps )
    Isolation
    3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
    Terminator Resistor
    Jumper for 120 [ terminator resistor
    Specification
    ISO-11898-2, CAN 2.0A and CAN 2.0B
    LED
    Round LED
    Tx/Rx LED, ERR LED
    Software
    Driver
    For I-8000/IP-8000/ViewPAC/WinPAC/LinPAC/ XPAC
    Library
    TC/BC, GCC, VB.Net 2003, C#.Net 2003, VB.Net 2005, C#.Net 2005, eVC++ 4.0
    Power
    Power supply
    Unregulated +10 ~ +30 VDC
    Power Consumption
    2 W
    Mechanism
    Dimensions
    31mm x 91mm x 115mm (W x L x H)
    Environment
    Operating Temp.
    -25 ~ 75 J
    Storage Temp.
    -30 ~ 80 J
    Humidity
    10 ~ 90% RH, non-condensing
       
     
       
     
  • Development Toolkit for I-8000/WinCon/LinCon/WinPAC
  • I-87120 (I-87KCAN) don't support any ISaGRAF series main control unit
  •  
         
     
     
     
         
     
    I-87120-G (I-87KCAN)
    Module with one programmable CAN port, I-8000/IP-8000/ViewPAC/WinPAC/LinPAC/ XPAC library, 80186 80 MHz CPU, 512 KB Flash and SRAM, 120 [ terminal resister selected by jumper.
     
         
     
     
     
         
     
    Libary & Demo for I-87120 user-defined firmware
    Document
    Version
    Download
    Size
    Update
    Remarks
    Library
    1.10
    66.6KB
    May-20-2008
    Demo
    1.03
    1.31MB
    May-20-2008
     
         
     
    Libary & Demo for I-8000 Series
    Document
    Version
    Download
    Size
    Update
    Remarks
    Library
    1.03
    3.5KB
    Aug-06-2006
    Demo
    1.00
    0.16MB
    Aug-06-2006
     
         
     
    Libary & Demo for WinCon-8000 Series
    Document
    Version
    Download
    Size
    Update
    Remarks
    Library
    1.10
    5.04KB
    May-20-2008
    Demo
    1.10
    229KB
    May-20-2008
     
         
     
    Libary & Demo for WinPAC-8000 Series
    Document
    Version
    Download
    Size
    Update
    Remarks
    Library
    1.10
    5.15KB
    May-20-2008
    Demo
    1.10
    234KB
    May-20-2008
     
         
     

    Libary & Demo for LinCon-8000 Series

    Document
    Version
    Download
    Size
    Update
    Remarks
    Library
    1.03
    14.5KB
    Aug-06-2006
     
    Demo
    1.00
    0.12MB
    Aug-06-2006
     
     
         
     
     
     
         
     
    9-pin Female D-sub & 3-wire CAN bus cable (1M)
    7/14 channel Surge Protector
    EMI Ferrite Split/Snap-On Core
    Field-Installation A-coded 5-pin Female
     
         
       
    Copyright© ICP DAS Co., Ltd. All Rights Reserved