Introduction
ICP DAS has a lot of Wi-Fi converters. It’s absolutely the right choice for wireless M2M (Machine-to-Machine) applications. You can connect all your devices wirelessly while the wired employing is too difficult or not feasible with built-in high-performance IEEE802.11a/b/g/n/ac compliant Wi-Fi module. The Wi-Fi converts support many interfaces such as RS-232, RS-485 and Ethernet. The Wi-Fi converts also support dual bands (2.4/5 GHz). The 2.4 GHz is more crowded than 5 GHz. Therefore, the devices on 2.4 GHz suffer much more interference than the ones on 5 GHz. The Wi-Fi device will have less interference on 5 GHz.Selection Guide
|
||||||||
Wi-Fi Converter
|
||||||||
Model | Standard | Channel | MIMO | Antenna | Interface | Plug Type | Casing | |
---|---|---|---|---|---|---|---|---|
WF-2572
|
IEEE 802.11 a/b/g/n | CH 1~CH 11 @ 2.4 GHz CH 36/40/44/48 @ 5 GHz |
- | 3 dBi @ 2.4 GHz 5.5 dBi @ 5 GHz |
1x RJ-45 | - | Plastic | |
WF-2572M
|
IEEE 802.11 a/b/g/n | Metal | ||||||
IOP760AM
|
IEEE 802.11 a/b/g/n/ac | CH 1~CH 11 @ 2.4GHz CH 36/40/44/48/149/153/ 157/161/165 @ 5GHz |
2T2R | 5 dBi @ 2.4GHz 5 dBi @ 5GHz |
1x RJ-45 1x RS-232/485 |
A plug type | ||
IOP760AM-EU
|
E plug type | |||||||
IOP760
|
2x RJ-45 1x RS-232/485 |
A plug type |
Introduction
The ICP DAS has Modbus/RTU to Modbus/TCP gateway. It exchanges Modbus command from Modbus TCP/RTU master to Modbus RTU/TCP slave. Modbus TCP command can be transceived not only Ethernet port but also Wi-Fi interface. It supports VxComm and Pair-Connection functions. Users can choose Ethernet mode or Wi-Fi mode to do the pair connection, which provides TCP data tunneling between two serial devices.
Selection Guide
|
|||||
Wi-Fi Gateway
|
|||||
Model | Standrad | Antenna | Interface | Protocol | |
---|---|---|---|---|---|
RMV-760D-MTCP
|
IEEE 802.11b/g | 3 dBi @ 2.4 GHz | 1× RJ-45 1× RS-232 1× RS-485 |
Modbus RTU/TCP master and slave | |
RMV-762D-MTCP
|
IEEE 802.11 b/g/n | 3 dBi @ 2.4 GHz/5GHz | 1× RJ-45 1× RS-232 1× RS-485 |
Modbus RTU/TCP master and slave | |
Introduction
The ICP DAS W-Fi AP is designed for medium-sized businesses to extend the existing networks and has the ability to operate in different modes and can be used in a wide variety of wireless applications. Its Universal Repeater Mode not only has an easier way for setup, but also provides better performance and compatibility to create a larger wireless network infrastructure by linking up other access points. It also supports Multiple-SSID function to simultaneously emulate 8 APs with different ESSIDs and separate packets via VLAN IDsSelection Guide
|
|||||||
Wi-Fi AP
|
|||||||
Model | Standrad | Channel | MIMO | Antenna | Mode | Plug Type | |
---|---|---|---|---|---|---|---|
APW77BAM
|
IEEE 802.11a/b/g/n/ac | CH 1~CH 11 @ 2.4 GHz CH 36/40/44/48/149/153/157/161/165 @ 5 GHz |
2T2R | 5 dBi @ 2.4 GHz 5 dBi @ 5 GHz |
AP Only/ WDS Only/ WDS Hybrid/ Universal Repeater/ Client Modes |
A plug type | |
APW77BAM-EU
|
E plug type | ||||||