I-7188(D)/DOS/512
The .zip file contains the required header files, libraries and a lot of useful demos.
FILE | FILE NAME | RELEASE | SIZE | DOWNLOAD |
---|---|---|---|---|
7188_rom-dos.zip | 7188_rom-dos.zip | 1999/09/07 | 471 KB |
File Structure
7188_rom-dos.zip
This folder contains a README.TXT file that describes all the demos contained in this folder.
The table below lists the required header files and libraries for I-7188(D)/DOS/512 that are also contained in LIB subfolder.
I-7188(D)/DOS/512 Libraries
FILE NAME | DESCRIPTION |
---|---|
LIB | Required Header Files and Libraries header file: 7188.H library: 7188L.LIB |
Demo Samples
FILE NAME | DESCRIPTION |
---|---|
7000TOT | 7000 TimeOut Test. Test 7000 timeout count range for function ReceiveResponseFrom7000. |
COM3COM4 | To show how to write COM3/COM4 ISR |
DEMO0 | To read/write RTC by ROM-DOS |
DEMO1 | Basic I/O test |
DEMO10 | To connect to 7000, 4*7052 + 2*7043 + 1*7053 |
DEMO11 | To connect to 7000, 7053 + 7053 |
DEMO12 | To connect to 7000, 7053 + 7051 |
DEMO13 | To connect to 7000, 7017 + display |
DEMO14 | To connect to 7*7053(16*7=112 DI) |
DEMO18 | To connect to 7000, 4*7067 + 4*7042 + 4*7052 |
DEMO2 | 2*RS-232 + 1*RS-485 test |
DEMO20 | PLC I/O expansion, SIEMEMS's S7 |
DEMO21 | To connect to FACON PLC |
DEMO3 | 2*RS-485 test |
DEMO30 | To connect to Touch Screen, TOUCH7(Touch 200) |
DEMO31 | To connect to Touch Screen, HITECT, PWS-1700 |
DEMO32 | To connect to Touch7(Touch 200) +7060+7013+7017+7021(DemoBox2) |
DEMO33 | To connect to 7060+7013+7017+7021+7080D(DemoBox3) |
DEMO34 | To connect to Touch7(Touch 200)+7060+7013+7017+7021+Step motor(DemoBox4) |
DEMO35 | To connect to Touch7(Touch 200)+7060D+7017+7021+Step motor +SST-2400 +PC1 (demo box for Taipei computex show 99') |
DEMO36 | To connect to MMICON+7065D+7016D+7033D+SST-2400+PC2 (demo board for Taipei computex show 99') |
DEMO37 | To connect to 7013D+7021+7012D+7044D |
DEMO4 | 3*MMI_CON + 1*7011 + 1* 7012 |
DEMO40 | To connect to Card Reader |
DEMO5 | To read-NVRAM & write-NVRAM test |
DEMO50 | IKIT-07 demo program |
DEMO51 | IKIT-08 demo program |
DEMO52 | IKIT-09 demo program(Not finished) |
DEMO6 | To read-EEPROM & write-EEPROM test |
DEMO60 | To set 7188 address(for connect more than one 7188s with 485 bus) |
DEMO61 | To connect PC to more than one 7188 (run on 7188) |
DEMO62 | To Connect PC to more than one 7188 (run on PC) |
DEMO7 | To enable/disable watchdog |
DEMO70 | PC0+7520--+-- 7188-1 + PC1 +-- 7188-2 + PC1 ……………… +-- 7188-n + PCn (RS-485)(RS-232) |
DEMO8 | Modem application & how to write COM1/COM2 ISR |
DEMO80 | To user timer Interrupt Service Routine(ISR)(INT 0x1c) |
DEMO81 | D/O and Watchdog Timer(Not finished) |
DEMO82 | D/A and Watchdog Timer(Not finished) |
DEMO83 | To To use 7188 COM1 for 2*D/O and 4*D/I(Not finished) |
DEMO9 | To write data to FlashRom |
DEMO90 | To use I-7188 Lib's Timer function (1ms) |
DEMO91 | To use I-7188 Lib's Count Down Timer |
DEMO92 | To use I-7188 Lib's StopWatch Timer |
DEMO93 | To use I-7188 Lib's StopWatch to calculate other functions spent how much time. |
DEMO94 | To use I-7188 Lib's StopWatch to do something in fixed time interval. |
DEMO95 | To use I-7188 Lib's Timer to install To user timer function. |
DEMO96 | To use I-7188 Lib's To user timer function to do something in fixed time interval. |
DEMO97 | To use function DelayMs |
DEMO98 | To use user Timer function for receive 7000's response and set timeout in time. |
ECHO485 | To monitor/send command from/to COM2(RS-485) |
ECHOCOM | To monitor/send command from/to COM1/COM2/COM3 |
EMU7520 | To use I-7188 emulation I-7520 or as protocal converter |
FLASH | To read/write/erase FLASH memory,check I-7188's flash size. |
LD3 | Very high speed download program to RAM-DISK |
LOAD | (12/31/99) To download file to RAM-DISK (7188.exe Ver.1.11.0,ALT_E) |
LOADRAM | Low speed to download program to RAM-DISK |
LOADRAM2 | High speed to download program to RAM-DISK |
MMICON | To connect to MMICON(PC mode)(To use MMICON as terminal) |
MMICON2 | To connect to MMICON(PC mode)(To use MMICON as terminal)[method 2] |
MODBUS\MASTER | Demo for ModBus protocal(for master mode) |
MODBUS\SLAVE | Demo for ModBus protocal(for slave mode) |
PRINTF | Demo for To use function printCom,printCom1/2/3/4 |
QC\QC1 | QC program 1 for 7188 |
QC\QC2 | QC program 2 for 7188 |
QC\QC3 | QC program 3 for 7188 |
QC\QC4 | QC program 4 for 7188 |
RTSDTR | (09/02/99) Demo for Set RTS & DTR pin of COM1 |
TEST18 | To test program for demo18.(run on the master controller) |
TOROM | To download ROM-DISK.IMG to Flash Memory |
TO USE485 | (08/30/99) Demo program for To use half-duplex RS-485 |
WATCHDOG | To check if 7188 was reset by watchdog timer |