Ethernet I/O Module with 2-ch Strain Gauge Inputs, 2-ch DI, 2-ch DO |
|
|
|
|
 |
 |
Model: ET-7016 |
Model: PET-7016 |
|
|
 |
- Built-in Web Server
- Web HMI
- Support for both Modbus TCP and Modbus UDP Protocols
- Communication Security
- Dual Watchdog
- Wide Operating Temperature Range: -25 ~ +75°C
- I/O Pair Connection
- Built-in I/O
- Strain Gauge Input: 2 Channels
- DI/Counter: 2 Channels
- DO: 2 Channels
|
|
|
|
 |
The ET-7016/PET-7016 is a strain gauge module with 2 analog input channels, 1 excitation voltage output channel, 2 digital input channels and 2 digital output channels module. It provides various programmable analog input inputs (+/-1 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1 V, and +/-2.5 V) and supports full-bridge, half-bridge, and quarter-bridge. The range for each analog input is allowed to be configured individually. Excitation voltage output can be in the range of 0 ~ 10 V with a 60 mA driving efficiency. Digital outputs can also be set as alarm outputs. The ET-7016/PET-7016 can also provide long-distance strain gauge measurement that compensates for the loss of voltage resulting from long-distance measurements. |
|
 |
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment. |
|
 |
Models |
ET-7016 |
PET-7016 |
Software |
Built-In Web Server |
Yes |
Web HMI |
Yes |
I/O Pair Connection |
Yes |
Communication |
Ethernet Port |
10/100 Base-TX with Auto MDI/MDI-X |
PoE |
- |
Yes |
Protocol |
Modbus TCP, Modbus UDP |
Security |
ID, Password and IP Filter |
Dual Watchdog |
Yes, Module (0.8 seconds), Communication (Programmable) |
LED Indicators |
L1 (System Running) |
Yes |
L2 (Ethernet Link/Act) |
Yes |
L3 (Ethernet 10/100 M Speed) |
Yes |
PoE Power |
- |
Yes |
2 Way Isolation |
Ethernet |
1500 VDC |
- |
I/O |
2500 VDC |
2500 VDC |
EMS Protection |
ESD (IEC 61000-4-2) |
4 kV Contact for Each Terminal and 8 kV Air for Random Point |
EFT (IEC 61000-4-4) |
+/-4 kV for Power |
Power |
Reverse Polarity Protection |
Yes |
Powered from Terminal Block |
Yes, 10 ~ 30 VDC |
Yes, 12 ~ 48 VDC |
Powered from PoE |
- |
Yes, IEEE 802.3af, Class1 |
Power Output |
- |
- |
Consumption |
2.9 W (Max.) |
3.2 W (Max.) |
Mechanical |
Dimensions (W x L x H) |
72 mm x 123 mm x 35 mm |
Installation |
DIN-Rail or Wall mounting |
Environmental |
Operating Temperature |
-25 ~ +75 °C |
Storage Temperature |
-30~ +80 °C |
Humidity |
10 ~ 90% RH, non-condensing |
|
|
 |
Strain Gauge Input |
Channels |
2 (Differential) |
Type |
+/-15 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1 V, +/-2.5 V, +/-20mA, 10 ~ 20 mA, 4 ~ 20 mA |
Strain Gauge Type |
Full-Bridge, Half-Bridge, and Quarter-Bridge |
Individual Channel Configuration |
Yes |
Resolution |
16-bit |
Sampling Rate |
10 Samples/Second (Total) |
Accuracy |
+/-0.05% |
Zero Drift |
+/-0.5 μV/°C |
Span Drift |
+/-25 ppm/°C |
Overvoltage Protection |
30 VDC |
Input Impedance |
Voltage Input: >400 kΩ,
Current Input: 125 Ω |
Common Mode Rejection |
150 dB min. |
Normal Mode Rejection |
100 dB |
Excitation Voltage Output |
Channels |
1 |
Output Range |
0 ~ 10 V |
Max. Output Load Current |
60 mA |
Accuracy |
+/-0.05% of FSR |
Drift |
+/-50 ppm/°C |
Power-on Value |
Yes |
Digital Input/Counter |
Channels |
2 |
Contact |
Wet |
Sink/Source (NPN/PNP) |
Sink/Source |
Off Voltage Level |
+1 VDC Max. |
On Voltage Level |
+3.5 VDC ~ +50 VDC |
Counters |
Channels |
2 |
Max. Count |
4,294,967,285 (32-bit) |
Max. Input Frequency |
100 Hz |
Min. Pulse Width |
5 ms |
Overvoltage Protection |
70 VDC |
Digital Output |
Channels |
2 |
Isolated Open Collector |
Isolated Open Collector |
Sink/Source (NPN/PNP) |
Sink |
Max. Load Current |
700 mA/Channel |
Load Voltage |
+5 VDC ~ +50 VDC |
Overvoltage Protection |
60 VDC |
Overload Protection |
1.4 A |
Short-circuit Protection |
Yes |
Power-on Value |
Yes, Programmable |
Safe Value |
Yes, Programmable |
|
|
 |
ET-7016 CR |
Ethernet I/O Module with 2-ch Strain Gauge Inputs, 2-ch DI, 2-ch DO (RoHS) |
PET-7016 CR |
PoE Ethernet I/O Module with 2-ch Strain Gauge Inputs, 2-ch DI, 2-ch DO (RoHS) |
|
|
 |
NS-205 CR |
Unmanaged 5-port Industrial Ethernet Switch; reguires 24 VDC Input (RoHS) |
NS-205PSE CR |
Unmanaged Ethernet switch with 4-PoE and 1 RJ45 uplink; reguires 48 VDC Input (RoHS) |
NS-205PSE-24V CR |
Unmanaged Ethernet switch with 4-PoE and 1 RJ45 uplink; reguires 24 VDC Input (RoHS) |
MDR-20-24 CR |
24 V/1 A, 24 W Power Supply with DIN-Rail Mounting (RoHS) |
DIN-KA52F-48 CR |
48 V/0.52 A, 25 W Power Supply with DIN-Rail Mounting (RoHS) |
|
|
|
|
|
|
|