A-826PG
100 kS/s 16-channel 16-bit Analog Input,2-channel 12-bit Analog Output with 16 Digital Input/16 Digital Output |
|
| |
| |
 |
| Model: A-826PG |
|
|
 |
- 16-bit A/D converter
- 12-bit D/A converter
- 16 single-ended or 8 differential input channels
- 100 k/s sampling rate
- Two 12-bit analog output channels
- Analog Output Range : 0 ~ 5 V , 0 ~ 10 V, 0 ~ EXT Ref
- Software programmable gain : 0.5 , 1 , 2 , 4, 8
- Interrupt handling
- A/D Trigger modes : Software Trigger, Pacer Trigger, External Trigger , Event Trigger
- A/D data transfer modes : polling , interrupt , DMA
- 16 digital input & 16 digital output
- 37 pin D-Sub connector
|
|
|
| |
 |
The A-826PG is 16-bit multifunction analog and digital I/O boards for the PC/AT compatible computer. The A-826PG offer 16 single-ended or 8 differential analog inputs, plus two channels of analog output with 12-bit resolution. In addition, The A-826PG has 16 digital input, 16 digital output , and one timer/counter channel. The A-826PG provides gain of 0.5, 1, 2 , 4, 8 while the A-826PG provides gains of 0.5 , 1 , 2 , 4, 8 . It has a maximum sampling rate of 100 k samples/Sec., DMA operation is jumper selectable for levels 1 or 3. Interrupts are jumper selectable between 3 and 15.
ICP DAS discontinue the /NDA model (without D/A function) since the standard model provides full functions that covers the requirement for /NDA version. Please contacts us for OEM/ODM project if you are interested on customized version (or /NDA model). |
| |
 |
- Signal analysis
- Industrial automation
- Laboratory automation
- Sensor interface
|
- FFT & frequency analysis
- Transient analysis
- Production test
- Process control
|
|
| |
 |
- DOS sample program(with source codes)
- DLL and OCX SDK for Windows 98/NT/2000
- DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7
- VB/VC/Delphi/BCB sample programs with source codes are included
- LabVIEW toolkit for Windows
- Driver for Linux and DasyLab
|
| |
 |
| Analog Input |
| Channels |
16 single-ended/8 differential |
| A/D Converter |
16-bit, 8 μs conversion time |
| Sampling Rate |
100 kS/s. max. |
| Over voltage Protection |
Continuous +/-35 Vp-p |
| Input Impedance |
10 MΩ/6 pf |
| Trigger Modes |
Software, Pacer, External, Event |
| Data Transfer |
Polling, Interrupt, DMA |
| Accuracy |
0.01 % of FSR ±1 LSB @ 25 °C, ± 10 V |
| Zero Drift |
15 ppm/°C of FSR |
| Analog Output |
| Channels |
2 independent |
| Resolution |
12-bit |
| Accuracy |
0.01% of FSR ± 1 LSB @ 25 °C, ± 10 V |
| Output Range |
0 ~ 5 V, 0 ~ 10 V, 0 ~ Ext Ref |
| External Reference |
+10 V or -10 V max. |
| Output Driving |
+/- 5 mA |
| Slew Rate |
0.6 V/μs |
| Output Impedance |
0.1 Ω max. |
| Operating Mode |
Software |
| Digital Input |
| Channels |
16 |
| Compatibility |
5 V/TTL |
| Input Voltage |
Logic 0: 0.8 V max.
Logic 1: 2.0 V min. |
| Response Speed |
1.0 MHz (Typical) |
| Digital Output |
| Channels |
16 |
| Compatibility |
5 V/TTL |
| Output Voltage |
Logic 0: 0.4 V max.
Logic 1: 2.4 V min. |
| Output Capability |
Sink: 0.8 mA @ 0.8 V
Source: -2.4 mA @ 2.0 V |
| Response Speed |
1.0 MHz (Typical) |
| Timer/Counter |
| Channels |
3 independent |
| Resolution |
16-bit |
| Compatibility |
5 V/TTL |
| Input Frequency |
10 MHz max. |
| Reference Clock |
Internal: 2 MHz |
| General |
| Bus Type |
ISA |
| I/O Connector |
Female DB37 x 1
20-pin box header x 2 |
| Dimensions (L x W x D) |
175 mm x 122 mm x 22 mm |
| Power Consumption |
950 mA @ +5 V |
| Operating Temperature |
0 ~ 60 °C |
| Storage Temperature |
-20 ~ 70 °C |
| Humidity |
5 ~ 85% RH, non-condensing |
| Analog Input Range |
| Model |
A-826PG |
| Gain |
1 |
2 |
4 |
8 |
| Bipolar (V) |
+/- 10 |
+/- 5 |
+/- 2.5 |
+/- 1.25 |
| Sampling Rate Max. |
100 kS/s |
100 kS/s |
100 kS/s |
100 kS/s |
|
| |
 |
| A-826PG CR |
16-bit Multi-function Board (RoHS)
Includes one CA-4002 D-Sub connector. |
| A-826PG/S |
A-826PG + Daughter Board DB-8225
Includes one CA-3710 D-Sub cable. |
|
| |
 |
| CA-2010 |
20-pin flat cable,1 M |
| CA-2020 |
20-pin flat cable 2 M. |
| CA-3710 |
DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) |
| CA-3710D |
DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) |
| CA-3710DM-H |
DB-37 Male-Male Cable, 1.0 M, 180°. (RoHS) |
| CA-3730DM |
DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) |
| CA-3750DM |
DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) |
| CA-4002 |
37-pin Male D-sub connector with plastic cover. |
| DB-37 |
Directly connect signal to D-sub 37-pin connector |
| DN-37 |
DIN Rail Mounting 37-pin Connector |
| DB-8225 |
Screw Terminal Board For Analog I/O |
| DB-889D |
16-channel Analog Input Multiplexer Board |
| DB-16P |
16-channel Isolated Digital Input Daughter Board |
| DB-16R |
16-channel Relay Output Daughter Board |
| DB-24C |
24-channel Open Collector Output Daughter Board |
| DB-24SSR |
24-channel SSR Output Daughter Board |
| 125Ω, 0.1% DIP Resistors |
125 Ω External Resistor for use with Current Input |
|
| |
 |
|
| |
|
|
| |
|
|
