Introduction
     
  Selection Guide
       
     
 
ET-8000 Ethernet Remote I/O Units
 
 
 
   
 
   
Model: ET-8140 Model: ET-8860
 
 


 
   
 
 
 

The ET-8000 is a web-based Ethernet I/O module. It has a built-in web server that used for all configuration and I/O data monitoring and controlling using a regular web browser dynamically. No extra programming tools or HTML editor are needed. Thus users can easily and safely access the ET-8000 anywhere and anytime over the world.

In addition, the ET-8000 also supports various Modbus functions. For example, Modbus/TCP slave, Modbus/TCP to Modbus/RTU gateway, Modbus/RTU master, Modbus/RTU slave, and etc, meaning the ET-8000 can easily be integrated into any SCADA software environment using the Modbus protocol.

The ET-8000 Ethernet Remote I/O units is designed to be used in Industrial monitoring and measurement applications, so the hardware has been manufactured to survive in harsh and noisy environment. As a result, the module contains 3-way isolation against noise and surge signals, has a wild range power input (10~30VDC) and can operating at temperature ranging from -25¢XC~+75¢XC.

 

 
  back  
   
 
 
 
Built in Web Server
Each ET-8000 Ethernet Remote I/O units has a built - in web server that allows the user to easily configure, monitor and control the module from a remote location using a regular web browser.
Web HMI
The Web HMI function allows the user to create dynamic and attractive web pages to monitor and control the I/O points. The user can upload specific I/O layout pictures (bmp, jpg, gif format) and define a description for each I/O point. No HTML or Java skills are needed to create the web pages.
Communication Security
An Account and password is needed when logging into the ET-8000 web server. An IP address filter is also included, which can be used to allow or deny connections from specific IP addresses.
Modbus Protocol
  • The Modbus/TCP slave function on the Ethernet port can be used to provide data to remote SCADA
         software.
  • The Modbus/RTU slave function on the RS-232 port can be used to connect to a local HMI.
  • The Modbus /TCP to Modbus/RTU gateway function through the Ethernet port to the RS-232 port can
         be used to upgrade a serial device with Ethernet communication ability
  • Built-in I/O Slots (1, 2, 4 or 8 Slots)
    You can mix several different type (AI, AO, DI, DO or Counter) I/O modules in the same unit to suit different application.
    Extra Useful I/O Functions
    All Digital Out put modules provide¡G
  • Power on value (On boot up, the DO status is set to the Power-on value)
  • Safe value (If Modbus/TCP communication is lost for a specified period, the DO status is set to the
         safe value)
  • All Digital Input modules provide¡G
  • High/Low latched status
  • DI channels can also be used as DI status and 16-bit low speed (100Hz) counters.
  • 3-way Isolated Noise/Surge Protection
    To protect the hardware from damage caused by noise and surge, the ET-8000 Ethernet Remote I/O units is designed with isolation circuits for Ethernet, I/O and Power.
    Built-in Dual Watchdog
    The Dual Watchdog consists of the/a Module Watchdog and the/a Host Watchdog.
  • The Module Watchdog is a built-in hardware circuit that can be used to monitor the operation of the
         module and will reset the CPU module if a failure occurs in either the hardware or the software.
  • The Host Watchdog is a software function that can be used to monitor the operating status of the
         host, and is used to prevent network communication problems or host failures
  • Automatic MDI / MDI-X Crossover for Plug-and-play
    The RJ-45 port support automatic MDI/MDI-x that can automatically detect the type of connection to the Ethernet device without requiring special straight or crossover cables.
    Ventilated Housing Designed to Operate Between -25¢XC and +75¢XC
    The ET-8000 is housed in a plastic-based shell/case with a column-like ventilator that helps to cool the working environment inside the shell/case and allows the ET-8000 to operate at temperatures ranging from -25¢XC and +75¢XC.
     
      back  
    Copyright© ICP DAS Co., Ltd. All Rights Reserved