|
|
 |
|
|
| |
| |
|
I-7188XBD-CAN
I-7188 CAN bus series Programmable Automation Controller
|
|
|
|
|
|
| |
The I-7188XBD-CAN
series PACs (Programmable Automation Controller) are powered by
80188-40 processor with 512K bytes of static RAM, and 512K bytes
of Flash memory. All of them provide several communication interfaces
to adapt to various applications, such as CAN port, RS-232 port
and RS-485 port. Uses can program their application program flexibly
with C/C++ language because of the built-in MiniOS7 operation
system. Besides, the I-7188XBD-CAN series PACs have different I/O types for users to
|
|
| |
match their requirement. For I-7188XBD-CAN, it provides 1 open collector digital output channel and 1 digital input channel. It is useful for transfer the command
from differential communication interface. Therefore, it can satisfy the applications with
I/O demand. Therefore, the I-7188XBD-CAN series PACs are economic
and convenient solution for diversification CAN application.
|
|
|
|
|
|
| |
 |
|
| |
|
|
| |
|
| |
• CAN bus communication application • Industry automation • Auto detecting CANopen slave devices
• IO monitor • High speed data acquisition system • Process monitor and control • Factory automation
• Laboratory automation •Communication switching |
| |
|
|
|
| |
|
| |
|
| |
2500Vrms photo-isolation protection
Compatible with CAN specification 2.0 parts
A and B
Programmable transfer rate up to 1 Mbps.
Jumper select 120£[ terminator resistor for
CAN channel
64-bit hardware unique serial number inside
COM driver support interrupt & 1KB QUEUE
input buffer
COM port: COM1, COM2
Built-in RTC, NVRAM, EEPROM
One digital Input channel and one open collector
output channel
Built-in self-tuner ASIC controller on RS-485
port
7-segment LED display
Built-in ICP DAS¡¦s MiniOS7
Program download port: COM1
|
| |
|
|
|
| |
|
|
| |
|
|
| |
Hardware |
CPU |
80188, 40 MHz or compatible |
SRAM |
512 KB |
Flash |
512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles |
EEPROM |
2048 Bytes (8 block, each block contains 256byte); Data retention > 100 years; 1,000,000 erase/write cycles |
NVRAM |
31 bytes (battery backup, data valid for up to 10 years) |
RTC (Real Time Clock) |
Yes |
Watchdog |
CPU built-in |
Hardware Serial No. |
64-bit hardware serial No. |
CAN Interface |
Controller |
NXP SJA1000T with 16 MHz clock |
Transceiver |
NXP 82C250 |
Channel number |
1 |
Connector |
5-pin screwed terminal block (CAN_L, CAN_H, N/A for others) |
Baud Rate (bps) |
10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate) |
Transmission Distance (m) |
Depend on baud rate (for example, max. 1000 m at 50 kbps ) |
Isolation |
1000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminator Resistor |
Jumper for 120 £[ terminator resistor |
Specification |
ISO-11898-2, CAN 2.0A and CAN 2.0B |
UART Interface |
COM 1 |
RS-485/RS-232 (can¡¦t be used simultaneously) |
COM 1 Connector |
2-pin screwed terminal block (DATA+, DATA-)
5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND) |
COM 2 |
RS-485 (Self-turner inside) |
COM 2 Connector |
2-pin screwed terminal block (DATA+, DATA-) |
Transmission Distance (m) |
Depend on baud rate (for example, max. 1200 m at 9.6 kbps ) |
Baud Rate (bps) |
110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
LED |
Round LED |
L1 LED, L2 LED, L3 LED |
5-digit 7 Segment |
Yes |
Power |
Power supply |
Unregulated +10 ~ +30 VDC |
Protection |
Power reverse polarity protection, Over-voltage brown-out protection |
Power Consumption |
3 W |
Mechanism |
Installation |
DIN-Rail |
Dimensions |
72mm x 122mm x 33mm (W x L x H) |
Environment |
Operating Temp. |
-25 ~ 75 ¢J |
Storage Temp. |
-30 ~ 80 ¢J |
Humidity |
10 ~ 90% RH, non-condensing |
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
I-7188XBD-CAN-G |
Programmable automatic controller
with two series communication port (RS-232/RS-485), one
CAN port, seven segment Display, developing tool kit 512KB
flash ,512KB SRAM, Minios7, 1 DI and 1 DO channels |
I-7188XBD-CAN-G CR |
Programmable automatic controller
with two series communication port (RS-232/RS-485), one
CAN port, seven segment Display, developing tool kit 512KB
flash ,512KB SRAM, Minios7, 1 DI and 1 DO channels (RoHS) |
|
| |
|
|
|
| |
|
|
| |
|
|
| |
|
9-pin Female D-sub & 3-wire CAN bus cable (1M) |
|
7/14 channel Surge Protector |
|
EMI Ferrite Split/Snap-On Core
|
|
Field-Installation A-coded 5-pin Female
|
|
|
| |
|
|
| |
|
|
|
|
