|
|
|
|
The I-7580 is a PROFINET IO device with RT functionality that supports RS-232, RS-422 and RS-485 serial interfaces. Users can choose one of these serial communication interfaces to apply. It is easy to allow users to take almost serial device to a PROFINET network including serial remote I/O devices, sensors, actuators, HMI, barcode readers and RFID, etc.

|
|
|
|
Applications |
|
|
|
-
Industrial Automation
-
Factory Automation
-
Process Automation
-
Etc…
|
 |
|
|
|
|
Features |
|
|
|
- Protocol: PROFINET IO Device
- PROFINET Conformance Class B and RT Class 1
- Cyclic Time: 1ms (min)
- Generic GSDML File Provided (Version 2.25)
- Max length of input/output data is 512/384 Bytes
- Provide LED indicators
- 4 kV Contact ESD protection for any terminal
- Wide range of power input (+10 to +30 VDC) and operating temperature (-25 to 75°C)
|
|
|
|
Utility |
|
|
|
ICP DAS provides the PFN_Tool configuration utility to configure devices.
- Provide device search function
- Show firmware version
- Support network parameters configuration
- Show diagnostic messages of the I-7580
- Provide comport test function
- Provide Communication Log of comport

|
|
|
|
Hardware Specifications |
|
|
|
Hardware |
CPU |
32-bit CPU Core |
RAM/Flash/EEPROM |
32 MB / 4 MB / 8 KB |
Watchdog |
CPU built-in |
ESD Protection |
4 kV class A |
PROFINET Interface |
Protocol |
PROFINET IO Device |
Conformance Classes |
Class B |
Services |
RTC, RTA, CL-RPC, DCP, LLDP, I&M |
Cycle Time |
1 ms (min) |
Ethernet Interface |
Controller |
10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) |
Connector |
RJ-45 x 2 (LED indicators) , Integrated 2-Port Switch |
Services |
ICMP, IGMP, ARP, DHCP, TELNET, TFTP, SNMP, VLAN Priority Tagging |
UART Interface |
COM |
RS-232/RS-422/RS-485 (can't be used simultaneously) |
COM Connector | 3-pin screwed terminal block (RxD, TxD, GND)
4-pin screwed terminal block (RxD+, RxD-, TxD+, TxD-)
2-pin screwed terminal block (DATA+, DATA-) |
Baud Rate (bps) |
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800 |
Data bit |
7, 8 |
Stop bit |
1 |
Parity |
None, Even, Odd |
LED |
Round LED |
AP LED, BOOT LED, ERR LED |
Power |
Power supply |
Unregulated +10 ~ +30 VDC |
Protection |
Power reverse polarity protection, Over-voltage brown-out protection |
Power Consumption |
3.4 W |
Mechanism |
Installation |
DIN-Rail |
Dimensions |
42 mm x 76 mm x 119 mm (W x L x H) |
Environment |
Operating Temp. |
-25 ~ 75 ℃ |
Storage Temp. |
-30 ~ 80 ℃ |
Humidity |
10 ~ 90% RH, non-condensing |
|
|
|
|
Ordering Information |
|
|
|
I-7580 CR |
PROFINET to RS-232/422/485 Converter (RoHS) |
|
|
|
|
TOP |
|
|
|
|
|
|