home > product> solutions > industrial communication> Fieldbus > EtherCAT
 
ECAT-2610
 
Applications
Features
Hardware Specifications
Ordering Information
 
 
  • 繁體中文
    		•
  • English
    		•

    ECAT-2610 ~ NEW ~

    EtherCAT Slave to Modbus RTU Master Gateway
     
    		 

    Integrate your serial RS-232/422/485 based industrial devices and equipment to an EtherCAT control system without the need for any changes to the device. Just connect, configure and it's finished.

    The ECAT-2610 Communicator is a proven and trusted protocol converter gateway that connects non-networked industrial devices and equipment to EtherCAT. The gateway performs an intelligent protocol conversion and presents the serial data to the Master PLC/Controller as easily processed I/O data.

    		 
     
    Applications  

    		 
     
    Features  
    • Powerful MCU handles efficient network traffic
    • 2 x RJ-45 EtherCAT connectors
    • Integrate RS-232/422/485 serial device to EtherCAT
    • Allows system integrators to retro-fit older automation devices into modern EtherCAT communication structures
    • Requires no hardware or software changes to be made to the connected device
    • Compatible with all PLCs with EtherCAT support
    • Performs complete serial protocol conversion, no PLC function blocks required
    • Supports maximum 256 WORD Input and 256 WORD Output Data
    • Supports serial port interface
      • Supports Modbus RTU (Master) protocol
      • Supports RS-232/422/485 Port
      • Supports maximum Baud Rate 115200 bps
    		 
     
    Hardware Specifications  
    Network Interface
    Protocol EtherCAT
    RJ-45 Port RJ-45 x 2
    Distance between Stations: Max. 100 m (100BASE-TX)
    Data Transfer Medium: Ethernet/EtherCAT Cable (Min. CAT 5e)
    Communication Interface
    Protocol  Modbus RTU (Master)
    Serial Interface

    RS-232

    RS-422

    RS-485

    		 The RS-232, RS-422 and RS-485 cannot be used simultaneously
    • TxD, RxD, GND
    • TxD+, TxD-, RxD+, RxD-
    • Data+, Data-
    Power Input
    Redundant Input Range +12 ~ +48 VDC
    Power Consumption 0.1 A @ 24 VDC
    Protection Power reverse polarity protection
    Connector 3-Pin Removable Terminal Block (5.08mm)
    Mechanical
    Dimensions 110mm x 90mm x 33mm (H x W x D)
    Installation DIN-Rail
    Environmental
    Operating Temperature -25 °C ~ + 75 °C
    Storage Temperature -30 °C ~ + 80 °C
    Ambient Relative Humidity 10 ~ 90% RH, non-condensing
    		 
     
    Ordering Information  
    ECAT-2610 CR EtherCAT Save to Modbus RTU Master Gateway (RoHS)
    		 
       
    TOP  
       
       

    這個頁面上的內容需要較新版本的 Adobe Flash Player。

    取得 Adobe Flash Player