| |
|
|
| |
~New~ |
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
ViewPAC series VP-2117 is the ISaGRAF PAC with graphic display and keypad. It is equipped with an 80186 CPU
(16-bit and 80 MHz) running a MiniOS7 operating system, 3 I/O slots, a STN LCD, a rubber keypad and various connectivity including Ethernet and RS-232/485.
The ViewPAC - VP-2117 supports ISaGRAF Ver. 3 Workbench:
• IEC 61131-3 Standard Open PLC Programming Languages (LD, FBD, SFC, ST, IL, FC) + Flow Chart (FC)
• Auto-Scan I/O
• On-Line Debugging/Control/Monitoring, Off-Line Simulation
• Simple Graphic HMI
Its operating system, MiniOS7, can boot up in a very short time (0.4 ~ 0.8 seconds). It has a built-in hardware diagnostic function, and supports the full range of functions required to access all high profile I-8K and I-87K series I/O modules, such as DI, DO, DI/DO, AI, AO, Counter/Frequency, motion control modules, etc. Users can also choose RS-485 Remote I/O modules
(I-7000 series) or expansion units (RU-87Pn or I-87Kn) plugged with high profile I-87K serial I/O modules.
Compared with traditional HMI + PLC solutions, ViewPAC reduces overall system cost, space and gives you all the best features of HMIs and PLCs. |
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
 MiniOS7 Embedded Operating System (DOS-like) |
| ISaGRAF Ver.3 SoftLogic Inside |
| Support IEC 61131-3 Standard |
| Support Graphic and Keypad functions |
| Accepts max. 64 KB ISaGRAF code size |
| |
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
| 80186 CPU (16-bit & 80 MHz) |
3 I/O Expansion Slots (support High Profile I/O Modules) |
| 768 KB SRAM & 512 KB Flash |
64 MB NAND Flash for Data Storage |
| IP65 Compliant Front Panel |
10/100M Ethernet Port |
| Rubber Keypad |
3 Serial Ports (RS-232, RS-485) |
| STN LCD with English and Chinese Fonts |
|
| |
|
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
| Models |
VP-2117 |
| System Software |
| OS |
MiniOS7 (DOS-like embedded operating system) |
| Development Software |
| ISaGRAF Software |
ISaGRAF Ver. 3 |
IEC 61131-3 standard |
| Languages |
LD, ST, FBD, SFC, IL & FC |
| Max. Code Size |
64 KB |
| Scan Time |
2 ~ 25 ms for normal program
10 ~ 125 ms (or more) for complex or large program |
| CPU Module |
| CPU |
80186, 80 MHz |
| SRAM |
768 KB |
| Flash |
512 KB |
| Flash Disk |
64 MB NAND Flash |
| Dual Battery Backup SRAM |
512 KB; data valid up to 5 years (for retain variables) |
| EEPROM |
16 KB |
| NVRAM |
31 bytes (battery backup, data valid up to 5 years) |
| RTC (Real Time Clock) |
Provide second, minute, hour, date, day of week, month, year |
| 64-bit Hardware Serial Number |
Yes, for Software Copy Protection |
| Watchdog Timers |
Yes (0.8 second) |
| Communication Ports |
| Ethernet |
RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, LED indicators) |
| COM 0 |
Internal communication with the I-87K High profile modules in slot 0 ~ 2 |
| COM 1 |
RS-232 (RxD, TxD and GND) Program download port; Non-isolated |
| COM 2 |
RS-485 (Data+, Data-) with internal self-tuner ASIC; 2500 VDC isolated |
| COM 3 |
RS-232/RS-485 (RxD, TxD, CTS, RTS and GND for RS-232, Data+ and Data- for RS-485); Non-isolated |
| MMI (Man Machine Interface) |
| LCD |
STN, 128 x 64 Dot Matrix LCD |
| Display Mode |
Text + Graphics |
| Text Font |
English + Simplified Chinese/Traditional Chinese |
| Rubber Keypad |
24 keys |
| Buzzer |
Yes |
| LED Indicators |
3 Dual-Color LEDs
(PWR, RUN, LAN1, L1,L2, L3; L1 ~ L3 for User Programmable) |
| I/O Expansion Slots |
| Slot Number |
3 |
| Note: For High Profile I-8K and I-87K Modules Only |
| Mechanical |
| Dimensions (W x L x H) |
182 mm x 158 mm x 125 mm |
| Installation |
Panel Mounting |
| Ingress Protection |
Front panel: IP65 |
| Environmental |
| Operating Temperature |
-15 ~ +55°C |
| Storage Temperature |
-30 ~ +80°C |
| Ambient Relative Humidity |
10 ~ 90% RH (non-condensing) |
| Power |
| Input Range |
+10 ~ +30 VDC |
| Isolation |
1 kV |
| Capacity |
15 W |
| Consumption |
6 W |
| Protocols (some protocols need optional devices) |
| NET ID |
1 ~ 255, user-assigned by software |
| Modbus RTU/ASCII Master |
Max. 2 COM Ports: COM1 ~ COM3 and COM5. (*)
(To connect to other Modbus Slave devices.)
Max. Modbus_xxx Function Block amount for 2 ports: 128. |
| Modbus RTU Slave |
Max. 2 COM Ports, COM1 and one of COM2 or COM3. (For connecting ISaGRAF, PC/HMI/OPC Server & MMI panels.) |
| Modbus TCP/IP Slave |
Max. 6 connections. For connecting ISaGRAF & PC/HMI. |
| User-Defined Protocol |
COM1 ~ COM3, COM5 ~ COM16 (*) by serial communication function blocks. |
| Remote I/O |
One of COM2 or 3 supports I-7000 I/O modules, and I-87Kn base or RU-87P1/2/4/8 +
I-87K High Profile I/O boards as Remote I/O.
Max. 64 Remote I/O module for one PAC. |
| Fbus |
Built-in COM3 Port to exchange data between ICP DAS’s ISaGRAF PACs. |
| Ebus |
To exchange data between ICP DAS’s ISaGRAF Ethernet PACs via Ethernet port. |
| SMS:Short Message Service |
One of COM3 or COM5 can link to a GSM modem to support SMS. User can request data/control the controller by cellular phone. The controller can also send data & alarms to user’s cellular phone. (*)
Optional GSM/GPRS modem: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem) or the GSM/GPRS Modem on the website: http://oldweb.icpdas.com/products/GSM_GPRS/wireless/GSM_GPRS_modem.htm |
| CAN/CANopen |
Max. 3 COM Ports: COM1, 3 or COM5 ~ COM12 (*) can connect one I-7530 (RS-232 to CAN converter) to support CAN/CANopen devices and sensors.
One VP-2117 supports max. 3 RS-232 Ports to connect max. 3 I-7530. (FAQ-086) |
| FRnet I/O |
Support Max. 3 I-8172W FRnet Master cards to connect FRnet I/O modules (Max. 768-ch. DI + 768-ch. DO) |
| Send Email |
Actively or passively sending Email via Ethernet port through internet. Max. 10 receivers for each sending and can send Email with an attached file. (Max. file size is about 488 KB) |
| Optional I/O Functions (Refer to ISaGRAF PAC I/O Selection Guide for I/O Module list) |
| PWM Output |
High Speed PWM Module |
I-8088W, 8-ch PWM outputs, software support 1 Hz ~ 100 kHz (non-continuous),
duty: 0.1 ~ 99.9% |
| DO Module as PWM |
8-ch. max. 500 Hz max. For Off=1 & On=1 ms.
Output square wave: Off: 1 ~ 32766 ms, On: 1 ~ 32766 ms.
Optional DO Boards: I-8037W, 8041W, 8041AW, 8042W, 8050W, 8054W, 8055W, 8056W, 8057W, 8060W, 8063W, 8064W, 8068W, 8069W. (Relay Output boards cannot generate fast square wave) |
| Counters, Encoder, Frequency |
Parallel DI Counter |
8 ch. max. for 1 controller. Counter Val: 32-bit.; 500 Hz max.
Min. ON & OFF width must >1ms
Optional DI boards: I-8040W, 8040PW, 8042W, 8046W, 8048W, 8050W, 8051W, 8052W, 8053W, 8053PW, 8054W, 8055W, 8058W, 8063W. |
Serial DI
Counter |
Counter input: 100 Hz max. Counter value: 0 ~ 65535 (16-bit)
Optional serial I-87K DI boards: I-87040W, 87046W, 87051W, 87052W, 87053W, 87053W-A5, 87054W, 87055W, 87058W, 87059W, 87063W. |
| Remote DI Counter |
All remote I-7000 & I-87K DI modules support counters. 100 Hz max. value: 0 ~ 65535 |
| High Speed Counter |
I-87082W: 100 kHz max. 32-bit;
I-8084W: 250 kHz max. 32-bit |
| Encoder |
I-8093W: 3-axis Encoder Module, max. 1M Hz for quadrant input mode, max. 4M Hz for
pulse/direction and cw/ccw input mode. (FAQ-112)
I-8084W: 250 kHz max., 4-ch encoder, can be pulse/direction, or Up/Down or A/B phase
(Quad. mode); Not support Encoder Z-index. (FAQ-100) |
| Frequency |
I-87082W: 2-ch, 1 Hz ~ 100 kHz;
I-87088W: 8-ch, 0.1 Hz ~ 500 kHz;
I-8084W: 8-ch, 1 Hz ~ 250 kHz; |
| Motion |
Motion Control |
Can integrate with one I-8091W (2-axis) or two I-8091W (4-axis) to do motion control. Ethernet communication is also available when doing motion control. |
* Note: COM5 ~ COM16 are resided at the expansion boards if they are plugged on slot 0 ~ 2 of VP-2117.
* ISaGRAF FAQ: http://oldweb.icpdas.com/faq/isagraf.htm
* Recommend to use NS-205/NS-208 Industrial Ethernet Switch. |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
| VP-2117 CR |
ISaGRAF Based ViewPAC with STN LCD (English + Simplified Chinese Font) (RoHS) |
| VP-2117-TC CR |
ISaGRAF Based ViewPAC with STN LCD (English + Traditional Chinese Font) (RoHS) |
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
| |
Click here to see more optional accessories (Software & Hardware) |
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
| |
Click here to see more ISaGRAF PAC |
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
