ISA Bus, 2-axis High-speed Stepper Motor Control Card (Limited Functions and Economical)
Features
- 2-axis independent, simultaneous stepper motor control/servo motor control (Pulse input type)
- Drivers for DOS, Windows 95/98/ME, Windows NT
- Embedded Microprocessor
- Command Type Interface
- Linear and circular interpolation
- Acceleration/deceleration: Automatic trapezoidal acceleration/deceleration
- Output polarity can be programmable
- 5 optical isolated digital inputs per axis for limit switches
Introduction
The STEP-200 is a 2-axis, command-based stepper motor controller board for IBM PC/XT/AT bus-compatible devices. The board can also be used for pulse-type servo motor control (pulse input type). The board includes a build-in μP that performs a variety of motion control commands and shares the loading of the host computer. A 2 KB FIFO is included as a command buffer, which provides a buffer time of 1360 ms. The hardware architecture of STEP-200 is ideal for the Windows operating system, and drivers for DOS and Windows are provided offering real-time motion control solutions for Windows systems.
Applications
- Semiconductor Manufacturing
- Component Inspection
- Manufacturing Quality Control
- Food and Beverage Inspection
- Microscopy and Medical Imaging
- Biometrics Applications
- X-Y-Z Table
- Fix-pitch Stamping Machinery
- Transfer Machinery
- Spinner
- Load/Unload
Application System Structure
Ordering Information
| PRODUCT SERIES | DESCRIPTION | QNT. | INQUIRY |
|---|---|---|---|
This combination include other products.
Similar Products
| Software | |
|---|---|
| OS Support | Windows 95/98/ME/NT4.0 |
| SDK | DOS 6.2 |
| Hardware | |
|---|---|
| Connector | 25-pin D-Sub |
| General | |
|---|---|
| No. of Axes | 2 |
| Operation Mode | Open loop |
| Speed Profile | T-curve |
| Position Control Mode | Incremental mode and absolute mode |
| Command Type | Pulse command |
| Axis I/O | |
|---|---|
| Servo Interface Output | SVON |
| Mechanical Switch Input | Home, forward, backward limit, EMG |
| Position Compare Output | 10 KHz |
| Encoder Input | |
|---|---|
| Ring Counter Mode | 32-bit |
| Pulse Output | |
|---|---|
| Mode | CW/CCW, PULSE/DIR |
| Counter Width | 32-bit |
| Rate | 250 KHz (Max.) |
| Digital Input | |
|---|---|
| Isolation | 2500 Vrms optical isolation |
| Digital Output | |
|---|---|
| Isolation | 2500 Vrms optical isolation |
| PC Bus | |
|---|---|
| Type | ISA bus |
| Power | |
|---|---|
| Consumption | +5 V @ 500 mA |
| Environment | |
|---|---|
| Operating Temperature | 0 ~ +50°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
