PM-3133i-EIP series

Isolated 3-phase Smart Power Meter, EtherNet/IP Series

Features

• Bi-directional Energy
• True RMS Power Measurements
• Energy Analysis for 3P4W, 3P3W, 1P3W, 1P2W
• Current Measurements Up to 400 A with Different CT Ratio
• Isolated Voltage Measurements Up to 600 V
• Clip-on CT for Easy Installation
• W Accuracy Better than 0.5% (PF=1)
• Total Harmonic Distortion (THD)

Introduction

ICP DAS brings the most powerful, cost-effective, advanced Smart Power Meters PM-3133i series that gives you access to real-time electric usage for three-phase power measurement. With its high accuracy (<0.5%, PF=1 ), the PM-3133i series can be applied to both low voltage primary side and/or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy consumption readings from the monitored equipments in real time under operation. These compact size and cost-effective power meters are equipped with revolutionary wired clip-on CT (various types, support input current up to 400 A). Built-in AC isolator protection, this means total isolation between the AC measurement side and the control side. It operates over a wide input voltages range 10 ~ 600 VAC which allows worldwide compatibility.

Applications

• Generator monitoring
• Switchgear distribution systems
• Energy Management

Ordering Information

Available soon

Will be phased out

Phased out

PRODUCT SERIES	DESCRIPTION	QNT.	INQUIRY
PRODUCT SERIES PM-3133i-100P-EIP CR	DESCRIPTIONEtherNet/IP, Isolated 3-phase power meter; includes 60A CT (Inside diameter 10 mm; wire lead 4 m) x 3 (RoHS)
PRODUCT SERIES PM-3133i-160P-EIP CR	DESCRIPTIONEtherNet/IP, Isolated 3-phase power meter; includes 100A CT (Inside diameter 16 mm; wire lead 4 m) x 3 (RoHS)
PRODUCT SERIES PM-3133i-240P-EIP CR	DESCRIPTIONEtherNet/IP, Isolated 3-phase power meter; includes 200A CT (Inside diameter 24 mm; wire lead 4 m) x 3 (RoHS)
PRODUCT SERIES PM-3133i-360P-EIP CR	DESCRIPTIONEtherNet/IP, Isolated 3-phase power meter; includes 300A CT (Inside diameter 36 mm; wire lead 4 m) x 3 (RoHS)
PRODUCT SERIES PM-3133i-400P-EIP CR	DESCRIPTIONEtherNet/IP, Isolated 3-phase power meter; includes 400A CT (Inside diameter 36 mm; wire lead 4 m) x 3 (RoHS)

This combination include other products.

Similar Products

Available soon

Will be phased out

Phased out

AC Power Measurement
Wiring	3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT
Loops	3-phase: 1 1-phase: 3 @ 1P2W-1CT 1 @ 1P3W-2CT
Input Voltage	10 ~ 600 V; built-in isolation transformer
Input Current	PM-3133i-100P-EIP: CTØ10 mm (0.05 A ~ 60 A) PM-3133i-160P-EIP: CTØ16 mm (0.1 A ~ 100 A) PM-3133i-240P-EIP: CTØ24 mm (0.15 A~200 A) PM-3133i-360P-EIP: CTØ36 mm (0.3 A~300 A) PM-3133i-400P-EIP: CTØ36 mm (0.3 A~400 A)
Input Frequency	50/60 Hz
W Accuracy	Better than 0.5% (PF=1)
Power Parameter Measurement	True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Apparent Power (kVA), Apparent Energy (kVAh), Reactive Power (kVAR), Reactive Energy (kVARh), Power Factor (PF), Frequency
Data Update Rate	1 Second

Ethernet
Ports	1 x RJ-45, 10/100 Base-TX
Protocol	EtherNet/IP

Power
Input Range	+12 ~ 48 VDC
Consumption	2 W

Mechanical
Casing	Plastic
Dimensions (mm)	33 x 127 x 100 (W x L x H)
Installation	DIN-Rail Mounting

Environment
Operating Temperature	-20 ~ +70 °C
Storage Temperature	-25 ~ +80 °C
Humidity	10 ~ 90% RH, Non-condensing