ViewPAC 是一款结合了 iPAC、图形显示、按键功能为一体的控制器。它配备有一个 80186 处理器 (16 位元,80 MHz) 并采用 MiniOS7 操作系统,包含了数种通讯接口 (以太网,RS-232/485)、3 个用来扩展 I/O 的模块插槽、STN LCD 显示屏和橡胶按键。
MiniOS7 操作系统可以在极短的时间内 (0.4 ~ 0.8 秒 ) 完成启动。它内建有硬件检测功能,并且提供完整的函数库来存取 I-8K 和 I-87K 系列的 I/O 模块。例如:数字量输入、数字量输出、模拟量输入、模拟量输出、频率 / 计数、运动控制 ... 等等的模块。
相较于传统的 HMI + PLC 方案,ViewPAC 将为您降低整体系统的成本与空间,并提供最佳的 HMI 和 PLC 功能。
软件特色
- MiniOS7 嵌入式操作系统 (类似 DOS)
- 基于 C 语言的软件开发工具
- 提供 Modbus 函数库
- 内置硬件诊断功能
- 可通过 RS-232 或以太网下载档案
硬件特色
- 80186, 80 MHz CPU (16-bit)
- IP65 防护等级前面板保护
- STN LCD (含中文字型)
- 24 橡胶按键
- 一个 10/100M 以太网口
- 64 位元硬件序号,软件防拷保护
- 运行温度 : -15 ~ +55 °C
|
|||||||||
C 语言开发系列 ViewPAC (MiniOS7 操作系统)
|
|||||||||
型号 | CPU | SDRAM | 双电池 备援SRAM |
NAND Flash | 显示类型 | 以太网口 | RS-232/ RS-485 |
I/O插槽 | |
---|---|---|---|---|---|---|---|---|---|
VP-2111 | 80186 或兼容, 16-bit, 80 MHz |
768 KB | 512 KB | 64 MB | STN, 128x64 Dot Matrix LCD |
1 | 3 | 3 | |
There are two types of I/O communication bus, parallel bus and serial bus. The parallel bus type I/O modules (high profile I-8K series) are high speed ones used only in the PACs including XPAC, WinPAC, iPAC, ViewPAC, etc. And the serial bus type I/O modules (high profile I-87K series) are low speed ones used in both PACs including XPAC, WinPAC, iPAC, ViewPAC, etc., and I/O expansion units including RU87Pn, ET-87Pn, USB-87Pn, etc.
The differences between the two series are listed as follows:
Model | I-8K Series | I-87K Series |
---|---|---|
Communication Interface | Parallel Bus | Serial Bus |
Protocol | - | DCON |
Communication Speed | Fast | Slow |
DI with Latched Function | - | Y |
DI with Counter Input | - | Y (100 Hz) |
Power on Value | Y | Y |
Safe Value | Y | Y |
Programmable Slew-Rate for AO Module | - | Y |
For more information, please go to the following web page.
远程 I/O 扩展
Ethernet
ET-7000、ET-7200、ET-87Pn-MTCP 和 I-8KEn-MTCP 为网络型 I/O 设备。PAC可通过以太网使用 Modbus/TCP 协议做远程控制。提供使用 C# 和 VB.net 开发用的函数库 nModbus.dll。
RS-485
FRnet
FRnet 是一个创新的工业现场总线。 FRnet 有许多特殊功能,例如:高速的 I/O 控制、实时的 I/O 同步更新功能、不需额外的通讯协议、简易的设定及维护方式。PAC 只需使用一 I-8172W I/O 模块,即可和 FRnet I/O 模块连接,实现高速分布式 I/O 网路(high-speed distributed I/O)。提供使用 C#、VB.net、VC 和 VB 开发用的函数库 pac_i8172w.dll。
CAN Bus
Controller Area Network (CAN) 是一种串行通讯,它能高效地支持分布式实时控制(distributed real-time control),并且具有相当高的安全性。CAN 具有错误处理机制和信息等级(message priority)的观念,让网内传输的可信赖性和效率大为提升。此外,CAN还具有多主站(multi-master)的能力,搭配传感器(sensors)和执行器(actuators)特别适合用来作智能控制网路。搭配 I-8123、I-8124、I-87120,PAC 可以实现 CAN、CANopen 和 DeviceNet 等所有功能。