這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player
home > product> solutions > remote i/o modules/units > I-7000/M-7000 Modules
 
 
 
   
 
 
I-7000 and M-7000 remote I/O modules provide cost-effective protection and conditioning for a wide range of valuable industrial control system. The product line includes sensor-tocomputer, computer-to-sensor, digital I/O, timer/counter, RS-232 to RS-485 converter, USB to RS-485 converter, RS-485 repeater, RS-485 hub and RS-232/422/485 to Fiber Optics. I-7000 supports DCON protocol, and M-7000 modules support Modbus RTU and DCON protocols. Many SCADA/HMI software and PLCs support Modbus RTU protocol. It is easy for them to integrate with M-7000 modules.
 
   
 
Factory automation, machine automation, testing equipment, building automation, solar energy system, pollution monitoring system, heating chamber…etc.  
   
 
I-7000 Series Common Features  
Isolation Voltage: 3000 VDC
 
Communication:
  • Asynchronous half-duplex 2-wire RS-485 network
  • Max. distance without repeater=4000 feet(1.2Km)
  • Speed=1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
  • A maximum of 256 Modules can be connected in a single RS-485 bus without using a repeater
  • Multiple baud rates and multiple data formats can share the same RS-485 bus(I-7520/7510)
  • Different baud rates and the same module address can share the same RS-485 bus
  • Connecting 256*8=2048 modules max. in one RS-485 bus with repeater.
  • I-7000 series data format = 1 start + 8 data + 1 stop + no parity = 10-bit
  • Two extra checksum bytes can be enabled/disabled
  • Built-in transient voltage suppresser and PTC protector
  • Sharing the same RS-485 bus with a RS-485 or RS-232 device that communicates in multiple data format not 10-bit) and multiple baud rate. (Use I-7520 to convert from RS-232 to RS-485)
 
Power:
  • +10 V ~ +30 VDC
  • Power reverse protection, over-voltage brown-out protection
 
System:
  • Internal daul watchdog , power-on start value and safe value for host failure
  • Operating temperature: -25 ~ 75 °C
  • Storage temperature: -40 ~ 85 °C
  • Humidity: 5 ~ 95%, non-condensing
 
 
I-7000 & 7188 Series DIN-Rail Mounting Installation Guide  
STEP 1 STEP 2 STEP 3
STEP 4 STEP 5 STEP 6
 
   
TOP  
   
   
   

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player