這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

home > product> solutions > Remote I/O > Ethernet I/O > ET-7060/PET-7060/ET-7260/PET-7260
 
Ethernet I/O Module with 6-ch Relay, 6-ch DI
 
 
   
Model: ET-7060/PET-7060 Model: ET-7260/PET-7260
 
  • Built-in Web Server
  • Web HMI
  • Support for both Modbus TCP and Modbus UDP Protocols
  • Communication Security
  • 2-port Ethernet Switch for Daisy-Chain Topology
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 ~ +75°C
  • I/O Pair Connection
  • Built-in I/O
    • DI/Counter: 6 Channels
    • Power Relay: 6 Channels
 
The ET-7060/PET-7060/ET-7260/PET-7260 provides 6 wet contact digital input channels and 6 form A electromechanical relays. It features optical isolation for 3000 VDC of transient overvoltage protection and doesn’t have channel-to-channel isolation. Each input channel can be used as a 32-bit counter. The power-on value and safe value of relay are programmable.

Note: When inductive loads are connected to the relays, a large counter electromotive force may occur when the relay actuates because of the energy stored in the load. These flyback voltages can severely damage the relay contacts and greatly shorten the relay life. Limit these flyback voltages at your inductive load by installing a flyback diode for DC loads or a metal oxide varistor for AC loads.
 
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.
 
Models ET-7060 PET-7060 ET-7260 PET-7260
Software
Built-In Web Server Yes
Web HMI Yes
I/O Pair Connection Yes
Communication
Ethernet Port 1 x RJ-45, 10/100 Base-TX 2 x RJ-45, 10/100 Base-TX, Swtich Ports
PoE - Yes - Yes
Protocol Modbus/TCP, Modbus/UDP
Security ID, Password and IP Filter
Dual Watchdog Yes, Module (0.8 second), Communication (Programmable)
LED Indicators
for System Running Yes
for Ethernet Link/Act Yes
for DI/DO status - Yes
for PoE Power - Yes - Yes
2-Way Isolation
Ethernet 1500 VDC - 1500 VDC -
I/O 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal and ±8 kV Air for Random Point
EFT (IEC 61000-4-4) ±2 kV for Power Line ±4 kV for Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line ±2 kV for Power Line
Power Requirements
Reverse Polarity Protection Yes
Powered from Terminal Block 10 ~ 30 VDC 12 ~ 48 VDC 12 ~ 48 VDC 12 ~ 48 VDC
Powered from PoE - Yes, IEEE 802.3af, Class1 - Yes, IEEE 802.3af, Class1
Consumption 2.9 W (Max.) 2.8 W (Max.) 3.6 W (Max.) 3.8 W
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm 76 mm x 120 mm x 38 mm
Installation DIN-Rail or Wall mounting
Environmental
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing
 
Models ET-7060 PET-7060 ET-7260 PET-7260
Digital Input/Counter
Channels 6
Contact Wet Contact
Sink/Source (NPN/PNP) Sink/Source
On Voltage Level +10 VDC ~ +50 VDC
Off Voltage Level +4 VDC Max.
Input Impedance 10 kΩ
Counters Max. Count 4,294,967,285 (32 bits)
Max. Input Frequency 500 Hz 100 Hz
Min. Pulse Width 1 ms 5 ms
Overvoltage Protection +70 VDC
Power Relay
Channels 6
Type Power Relay, Form A (SPST N.O.)
Contact Rating 5 A @ 250 VAC/24 VDC (Resistive Load)
Min. Contact Load 10 mA @ 5 V
Operate Time 10 ms (max.)
Release Time 5 ms (max.)
Mechanical Endurance 2 × 107 ops.
Electrical Endurance 105 ops.
Power-on Value Yes, Programmable
Safe Value Yes, Programmable
 
ET-7060 CR Ethernet I/O Module with 6-ch Relay Output and 6-ch DI (RoHS)
PET-7060 CR PoE Ethernet I/O Module with 6-ch Relay Output and 6-ch DI (RoHS)
ET-7260 CR Ethernet I/O Module with 2-port Ethernet Switch, with 6-ch Relay Output and 6-ch DI (RoHS)
PET-7260 CR PoE Ethernet I/O Module with 2-port Ethernet Switch, with 6-ch Relay Output and 6-ch DI (RoHS)
 
NS-205 CR Unmanaged 5-port Industrial Ethernet Switch; reguires 24 VDC Input (RoHS)
NS-205PSE CR Unmanaged Ethernet switch with 4-PoE and 1 RJ45 uplink; reguires 48 VDC Input (RoHS)
NS-205PSE-24V CR Unmanaged Ethernet switch with 4-PoE and 1 RJ45 uplink; reguires 24 VDC Input (RoHS)
MDR-20-24 CR 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting (RoHS)
DIN-KA52F-48 CR 48 V/0.52 A, 25 W Power Supply with DIN-Rail Mounting (RoHS)
 
TOP | HOME
 

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player