這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

home > product> solutions > Remote I/O > Ethernet I/O > ET-7017/ET-7217/PET-7017/PET-7217
 
Ethernet I/O Module with 10/20-ch AI
 
 
   
Model: ET-7017-10/PET-7017-10 Model: ET-7217-10/PET-7217-10
 
  • Built-in Web Server
  • Web HMI
  • Support for both Modbus TCP and Modbus UDP Protocols
  • Communication Security
  • 2-port Ethernet Switch for Daisy-Chain Topology
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 ~ +75°C
  • I/O Pair Connection
  • Built-in I/O
    • AI: 10/20 Channels with 240 Vrms Overvoltage Protection
 
The ET-7017-10/PET-7017-10/ET-7217-10/PET-7217-10 is a module with 10-channel differential or 20-channel single-ended analog inputs. It provides programmable input range on all analog channels (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA and 4 ~ 20 mA). Each analog channel is allowed to configure an individual range and has 240 Vrms high overvoltage protection. Each analog input can be programmed to accept voltage or current as input depending upon the position of corresponding jumper. The sampling rate of ET-7017-10/PET-7017-10/ET-7217-10/PET-7217-10 has two modes; fast mode and normal mode for your consideration. ET-7017-10/PET-7017-10/ET-7217-10/PET-7217-10 also has qualification for 4 kV ESD protection as well as 3000 VDC intra-module isolation.
 
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.
 
Models ET-7017-10 PET-7017-10 ET-7217-10 PET-7217-10
Software
Built-In Web Server Yes
Web HMI Yes
I/O Pair Connection Yes
Communication
Ethernet Port 1 x RJ-45, 10/100 Base-TX 2 x RJ-45, 10/100 Base-TX, Swtich Ports
PoE - Yes - Yes
Protocol Modbus TCP, Modbus UDP
Security ID, Password and IP Filter
Dual Watchdog Yes, Module (0.8 seconds), Communication (Programmable)
LED Indicators
for System Running Yes
for Ethernet Link/Act Yes
for DI/DO status -
PoE Power - Yes - Yes
2 Way Isolation
Ethernet 1500 VDC - 1500 VDC -
I/O 2500 VDC 2500 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal and ±8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power Line ±2 kV for Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line ±2 kV for Power Line
Power
Reverse Polarity Protection Yes
Powered from Terminal Block 10 ~ 30 VDC 12 ~ 48 VDC 12 ~ 48 VDC 12 ~ 48 VDC
Powered from PoE - Yes, IEEE 802.3af, Class1 - Yes, IEEE 802.3af, Class1
Consumption 2.8 W (Max.) 3.3 W (Max.) 3.6 W (Max.) 3.8 W (Max.)
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm 76 mm x 120 mm x 38 mm
Installation DIN-Rail or Wall mounting
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30~ +80 °C
Humidity 10 ~ 90% RH, non-condensing
 
Analog Input
Channels 10 differential or 20 single-ended (Note1),
software selectable
Type +/-150 mV, +/-500 mV, +/-1V, +/-5V, +/-10V
+/-20 mA ,0 ~ 20 mA, 4 ~ 20 mA
(Jumper Selectable)
Individual Channel Configuration Yes
Resolution 16-bit
Sampling Rate Normal Mode 10 Samples/Second (Total)
Fast Mode 50 Samples/Second (Total)
Accuracy Normal Mode +/-0.1%
Fast Mode +/-0.5% or better
Zero Drift +/-20 μV/°C
Span Drift +/-25 ppm/°C
Overvoltage Protection Differential 240 Vrms
Single-ended 150 Vrms
Common Voltage Protection ±200 VDC
Overcurrent Protection Yes, 50 mA at 110 VDC
Virtual Channel to Channel Isolation Yes, 400 VDC
Open Wire Detection for 4 ~ 20 mA Yes
Input Impedance Voltage 2 MΩ (Differential), 1 MΩ (Single-ended)
Current 125 Ω
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Note1: Differential mode can be used for voltage input and current input. Single-Ended mode can be used for voltage input only.
 
ET-7017-10 CR Ethernet I/O Module with 10/20-ch AI (RoHS)
PET-7017-10 CR PoE Ethernet I/O Module with 10/20-ch AI (RoHS)
ET-7217-10 CR Ethernet I/O Module with 2-port Ethernet Switch, with 10/20-ch AI (RoHS)
PET-7217-10 CR PoE Ethernet I/O Module with 2-port Ethernet Switch, with 10/20-ch AI (RoHS)
 
NS-205 CR Unmanaged 5-port Industrial Ethernet Switch; reguires 24 VDC Input (RoHS)
NS-205PSE CR Unmanaged Ethernet switch with 4-PoE and 1 RJ45 uplink; reguires 48 VDC Input (RoHS)
NS-205PSE-24V CR Unmanaged Ethernet switch with 4-PoE and 1 RJ45 uplink; reguires 24 VDC Input (RoHS)
MDR-20-24 CR 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting (RoHS)
DIN-KA52F-48 CR 48 V/0.52 A, 25 W Power Supply with DIN-Rail Mounting (RoHS)
 
TOP | HOME
 

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player