home > product> solutions > Remote I/O > Ethernet I/O > ET-7016/PET-7016
 
Ethernet I/O Module with 2-ch Strain Gauge Inputs, 2-ch DI, 2-ch DO
 
 
   
Model: ET-7016 Model: PET-7016
 
  • Built-in Web Server
  • Web HMI
  • Support for both Modbus TCP and Modbus UDP Protocols
  • Communication Security
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 ~ +75°C
  • I/O Pair Connection
  • Built-in I/O
    • Strain Gauge Input: 2 Channels
    • DI/Counter: 2 Channels
    • DO: 2 Channels
 
The ET-7016/PET-7016 is a strain gauge module with 2 analog input channels, 1 excitation voltage output channel, 2 digital input channels and 2 digital output channels module. It provides various programmable analog input inputs (+/-1 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1 V, and +/-2.5 V) and supports full-bridge, half-bridge, and quarter-bridge. The range for each analog input is allowed to be configured individually. Excitation voltage output can be in the range of 0 ~ 10 V with a 60 mA driving efficiency. Digital outputs can also be set as alarm outputs. The ET-7016/PET-7016 can also provide long-distance strain gauge measurement that compensates for the loss of voltage resulting from long-distance measurements.
 
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.
 
Models ET-7016 PET-7016
Software
Built-In Web Server Yes
Web HMI Yes
I/O Pair Connection Yes
Communication
Ethernet Port 10/100 Base-TX with Auto MDI/MDI-X
PoE - Yes
Protocol Modbus TCP, Modbus UDP
Security ID, Password and IP Filter
Dual Watchdog Yes, Module (0.8 seconds), Communication (Programmable)
LED Indicators
L1 (System Running) Yes
L2 (Ethernet Link/Act) Yes
L3 (Ethernet 10/100 M Speed) Yes
PoE Power - Yes
2 Way Isolation
Ethernet 1500 VDC -
I/O 2500 VDC 2500 VDC
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for Each Terminal and 8 kV Air for Random Point
EFT (IEC 61000-4-4) +/-4 kV for Power
Power
Reverse Polarity Protection Yes
Powered from Terminal Block Yes, 10 ~ 30 VDC Yes, 12 ~ 48 VDC
Powered from PoE - Yes, IEEE 802.3af, Class1
Power Output - -
Consumption 2.9 W (Max.) 3.2 W (Max.)
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall mounting
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30~ +80 °C
Humidity 10 ~ 90% RH, non-condensing
 
Strain Gauge Input
Channels 2 (Differential)
Type +/-15 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1 V, +/-2.5 V, +/-20mA, 10 ~ 20 mA, 4 ~ 20 mA
Strain Gauge Type Full-Bridge, Half-Bridge, and Quarter-Bridge
Individual Channel Configuration Yes
Resolution 16-bit
Sampling Rate 10 Samples/Second (Total)
Accuracy +/-0.05%
Zero Drift +/-0.5 μV/°C
Span Drift +/-25 ppm/°C
Overvoltage Protection 30 VDC
Input Impedance Voltage Input: >400 kΩ,
Current Input: 125 Ω
Common Mode Rejection 150 dB min.
Normal Mode Rejection 100 dB
Excitation Voltage Output
Channels 1
Output Range 0 ~ 10 V
Max. Output Load Current 60 mA
Accuracy +/-0.05% of FSR
Drift +/-50 ppm/°C
Power-on Value Yes
Digital Input/Counter
Channels 2
Contact Wet
Sink/Source (NPN/PNP) Sink/Source
Off Voltage Level +1 VDC Max.
On Voltage Level +3.5 VDC ~ +50 VDC
Counters Channels 2
Max. Count 4,294,967,285 (32-bit)
Max. Input Frequency 100 Hz
Min. Pulse Width 5 ms
Overvoltage Protection 70 VDC
Digital Output
Channels 2
Isolated Open Collector Isolated Open Collector
Sink/Source (NPN/PNP) Sink
Max. Load Current 700 mA/Channel
Load Voltage +5 VDC ~ +50 VDC
Overvoltage Protection 60 VDC
Overload Protection 1.4 A
Short-circuit Protection Yes
Power-on Value Yes, Programmable
Safe Value Yes, Programmable
 
ET-7016 CR Ethernet I/O Module with 2-ch Strain Gauge Inputs, 2-ch DI, 2-ch DO (RoHS)
PET-7016 CR PoE Ethernet I/O Module with 2-ch Strain Gauge Inputs, 2-ch DI, 2-ch DO (RoHS)
 
NS-205 CR Unmanaged 5-port Industrial Ethernet Switch; reguires 24 VDC Input (RoHS)
NS-205PSE CR Unmanaged Ethernet switch with 4-PoE and 1 RJ45 uplink; reguires 48 VDC Input (RoHS)
NS-205PSE-24V CR Unmanaged Ethernet switch with 4-PoE and 1 RJ45 uplink; reguires 24 VDC Input (RoHS)
MDR-20-24 CR 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting (RoHS)
DIN-KA52F-48 CR 48 V/0.52 A, 25 W Power Supply with DIN-Rail Mounting (RoHS)
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player