home > product> solutions > remote i/o modules/units > DCS Redundancy I/O > FCM-MTCP
Field Communication Module with Modbus/TCP slave
~ NEW ~
  • Modbus/TCP slave
  • Hot-swappable
  • Allow 4 connection access simultaneously
  • RoHS compliance
  • 1000 VDC isolation
  • Redundancy
The FCP-MTCP is a communication module for the iDCS-8000 system. It supports Modbus/TCP slave, most well-known industrial protocol, for the PLCs or controllers which support Modbus/TCP master. This module also offers LED to indicate system diagnostic and Ethernet connection status locally. Besides, two rotary switches are provided to instant configure ID (IP address) for other FCM-MTCP. Moreover, the module offers 1000 VDC isolation between channels and backplane bus. If any high voltage or current damages the channels, the system (backplanes, other modules, and control unit) won't be affected because the benefit of isolation.
  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
Redundant Yes (Two Modbus/TCP slave with two different IP address)
Ethernet link broken detection Yes
64-bit hardware serial number Yes
Watchdog timer Yes
LED indicator 1 RUN, 1 HF, 1 LF, 1 Link, 1 Act
CPU 80186 or compatible (16-bit, 80MHz)
SRAM 512 Kbytes
Flash 512 Kbytes, 100,000 erase/write cycles
EEPROM 16 Kbytes, 1,000,000 erase/write cycles
Communication Interface
RJ-45 port 10/100Base-T(X), Auto negotiating, Auto MDI/MDI-X
IP address Configurable through two rotary switches
Protocol Modbus/TCP slave (Allow 4 connection access simultaneously)
EMC EN61000-6-2, EN61000-6-4
IEC/EN 61000-4-2, IEC/EN 61000-4-4
Maximum power consumption 2.1 W @ 24 VDC
Operating temperature -25 °C ~ +75 °C
Humidity 5 ~ 95 % RH, Non-condensing
Weight 300 g
Dimensions (W x L x H) 30mm x 85mm x 115mm
FCM-MTCP CR Field Communication Module with Modbus/TCP slave (Gray Cover)(RoHS)
4SIPP-801W-CAG Blank I/O module
Ethernet Switch Industrial Ethernet Switch with DIN rail mounting
Power Supply 24 VDC power supply
ISaGRAF A PLC-like SoftLogic (IEC 61131-3) standard software

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player