home > product> solutions > remote i/o modules/units > iDCS Redundancy I/O

home > product> solutions > remote i/o modules/units > iDCS Redundancy I/O > F-8028CV

F-8028CV
8-channel Isolated Analog Output Redundant Module

~ NEW ~

Model: F-8028CV


8 current/voltage output channels Overrange output Short circuit protection Open wire detection RoHS compliance 3000 VDC isolation from output to backplane 3000 VDC isolation from output to frame ground Redundancy Fast redundant switching time (<1 ms)

The F-8028CV is a 16-bit, 8-channel analog output module that features programmable output range on all channels. It provides digital to analog conveter controlled by the system module to convert the digital data into output signals. Users can specify the start up and safety value through configuration software. Moreover, this module has ±0.05% accuracy for highly accurate application. Besides, the F-8028CV provides 3000 VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.

Building Automation
Factory Automation
Machine Automation
Remote Maintenance
Remote Diagnosis
Testing Equipment

Feature
Redundant	Yes (Switching time < 1 ms)
Termination board break off detection	Yes
Short Circuit Protection	Yes
Open Wire Detection	Yes (4 ~ 20 mA)
Power-On Value	Yes
Safety Value	Yes
LED indicator	1 RUN, 1 ACT, 1 DUX
Analog Output
Number of channels	8
Type	0 ~ 20 mA, 4 ~ 20 mA (current sourcing) 0 ~ 5 V, ±5 V, 0 ~ 5 V, ±10 V
Maximum Allowable Output Range	0 ~ 20 mA	+20% (0 ~ 24 mA)
	4 ~ 20 mA	±25% (0 ~ 24 mA)
	0 ~ 5 V	+20% (0 ~ 6 V)
	±5 V	±20% (±6V)
	0 ~ 5 V	+20% (0 ~ 12 V)
	±10 V	±20% (±12V)
Resolution	16 bit
Output Response Time	<200 μS
Accuracy	±0.05% FSR
Zero Drift	±0.2 μV/℃
Span Drift	±25 ppm/℃
Output Capacity	Current	750 Ω
	Voltage	500 Ω
Data Range	-2500 ~ 12500
Isolation	3000 VDC
Certification
EMC	EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4
General
Termination board	DN-AIO-M
Maximum power consumption	1 W
Operating temperature	-25°C ~ +75°C
Humidity	5 ~ 95 % RH, Non-condensing
Weight	300 g
Dimensions (W x L x H)	30 mm x 85 mm x 115 mm

F-8028CV CR

8-channel Isolated Analog Output Redundant Module (Gray Cover)(RoHS)

DN-37-A	I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 5.08 mm)
DN-37-381-A	I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 3.81 mm)
DN-AIO-M	Termination board for analog I/O modules
CA-3710AM	1m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3720AM	2m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3730AM	3m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3750AM	5m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-37100AM	10m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3710D	DB-37 Male-Male D-sub cable 1M, Cable for Daughter Board (180o)
CA-3720D	DB-37 Male-Male D-sub cable 2M, Cable for Daughter Board (180o)

TOP

HOME

這個頁面上的內容需要較新版本的 Adobe Flash Player。