PEX-1002L/PEX-1002H/PCI-1002HU/PCI-1002LU
PEX-1002L/H: PCI Express, 32-ch, 12-bit, 110 kS/s 或 44 kS/s 多功能卡
PCI-1002LU/HU: 通用 (Universal) PCI, 32-ch, 12-bit, 110 kS/s 或 44 kS/s 多功能卡 |
|
 |
 |
| Model: PCI-1002LU/PCI-1002HU |
Model: PEX-1002L/PEX-1002H |
|
|
 |
- 12元位高解析度、110 kHz或44 kHz AD 轉換器
- 32 個單端/16 個差動輸入通道
- 總取樣率:
Low Gain 模式: 高達110 K samples/s
High Gain 模式: 高達 44 K samples/s
- 提供多個可程式化放大值:
PCI-1002LU/PEX-1002L : 1, 2, 4, 8 (Low Gain)
PCI-1002HU/PEX-1002H: 1, 10, 100, 1000 (High Gain)
- 16個數位輸入通道/16 個數位輸出通道
- 支援內部/外部觸發
- 數位輸入埠可設定為pull-high 或 pull-low
- 短卡設計
[PEX-1002L/H]
- 為PCI Express 介面，支援 PCI Express x1插槽
- 支援Card ID (SMD開關)
[PCI-1002LU/HU]
- 為Universal PCI介面，支援 +3.3 V 及+5 V PCI bus 插槽
|
|
|
| |
 |
PCI-1002LU/HU及PEX-1002L/H板卡是泓格新上市並符合RoHS環保規範的產品，新的PCI-1002LU/HU及PEX-1002L/H的設計可直接相容於PCI-1002L/H。
PCI-1002LU/HU 及PEX-1002L/H 為A/D系列多功能資料擷取卡，PCI-1002LU/HU 支援 3.3 V/5 V PCI bus 介面，PEX-1002L/H 則支援PCI Express 介面，他們都架構了可連續110KHz (Low gain) 或 44KHz (High gain) 12位元解析度的A/D轉換器，並且提供32 個單端/16 個差動式輸入通道、16個符合TTL規範的數位輸入通道及16個符合TTL規範的數位輸出通道。
PCI-1002LU/HU 及 PEX-1002L/H 並提供有 D/I Pull High/Low 設定功能，數位輸入埠可設定為 pull-high 或 pull-low ，當信號線脫落或斷線時，該 DI 值會相對維持 High 或 Low 的狀態(非浮動)。PEX-1002L/H還新增有Card ID 指撥開關的功能， 讓使用者可以自由設定每張板卡的識別碼。當系統同時使用多張 PEX-1002L/H 板卡時，使用者可以迅速而簡單區別這些同型號的板卡。
此系列卡支援在Linux、DOS、Windows 98/NT/2000、32/64-Bit Windows XP/2003/Vista/2008/7等作業系統環境下使用，還提供有動態函式庫及Active X控制項使開發更加容易及簡單易懂的各種語言範例程式，如Turbo C++、Borland C++、Microsoft C++、Visual C++、Borland Delphi、Borland C++ Builder、Visual Basic、Visual C#.NET、Visual Basic.NET及LabVIEW等，讓用戶能夠快速的上手來使用。 |
| |
 |
|
| |
 |
- 支援DOS Lib 及BC 範例程式 (包含 source codes)
- 支援Windows 95/98/NT/2K 的DLL 及 OCX SDK
- 支援32-bit/64-bit Windows XP/2003/2008/7/8/10 的 DLL 及 SDK
- 支援VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB 範例程式 (包含 source codes)
- 支援Windows LabVIEW 開發工具
- 支援 Linux 驅動程式
|
| |
 |
| Model Name |
PCI-1002LU |
PCI-1002HU |
PEX-1002L |
PEX-1002H |
| Analog Input |
| Channels |
32 single-ended/16 differential |
| A/D Converter |
12-bit, 8 μs Conversion time |
| Sampling Rate |
110 kS/s. max. |
44 kS/s. max. |
110 kS/s. max. |
44 kS/s. max. |
| FIFO Size |
N/A |
| Over voltage Protection |
Continuous +/-35 Vp-p |
| Input Impedance |
10 MΩ/6 pF |
| Trigger Modes |
Software, Internal programmable pacer, External (5 V/TTL compatible) |
| Data Transfer |
Polling, Interrupt |
| Accuracy |
0.01 % of FSR ±1 LSB @ 25 °C, ± 10 V |
| Zero Drift |
+/- 4 ppm/°C of FSR |
| Dgital Input |
| Channels |
16 |
| Compatibility |
5 V/TTL |
| Input Voltage |
Logic 0: 0.8 V max.
Logic 1: 2.0 V min. |
| Response Speed |
1.0 MHz (Typical) |
500 KHz |
| Digital Output |
| Channels |
16 |
| Compatibility |
5 V/TTL |
| Output Voltage |
Logic 0: 0.4 V max.
Logic 1: 2.4 V min. |
| Output Capability |
Sink: 2.4 mA
Source: 0.8 mA |
| Response Speed |
1.0 MHz (Typical) |
500 KHz |
| Timer/Counter |
| Channels |
3(Independent x 1/Internal pacer x 1/External pacer x 1) |
| Resolution |
16-bit |
| Compatibility |
5 V/TTL |
| Input Frequency |
10 MHz max. |
| Reference Clock |
Internal: 4 MHz |
| General |
| Bus Type |
3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
PCI Express x1 |
| Data Bus |
16-bit |
| Card ID |
No |
Yes(4-bit) |
| I/O Connector |
Female DB37 x 1
20-pin box header x 2 |
| Dimensions (L x W x D) |
188 mm x 105 mm x 22 mm |
167 mm x 110 mm x 22 mm |
| Power Consumption |
960 mA @ +5 V |
900 mA @ +3.3 V
350 mA @ +12 V |
| Operating Temperature |
0 ~ 60 °C |
| Storage Temperature |
-20 ~ 70 °C |
| Humidity |
5 ~ 85% RH, non-condensing |
| Analog Input Range |
| Model |
PCI-1002L/PCI-1002LU/PEX-1002L (Low-Gain)
|
PCI-1002H/PCI-1002HU/PEX-1002H (High-Gain)
|
| Gain |
1 |
2 |
4 |
8 |
1 |
10 |
100 |
1000 |
| Bipolar |
+/- 10 |
+/- 5 |
+/- 2.5 |
+/- 1.25 |
+/- 10 |
+/- 1 |
+/- 0.1 |
+/- 0.01 |
| Sampling Rate Max. |
110 kS/s. |
44 kS/s. |
36 kS/s. |
7 kS/s. |
0.8 kS/s. |
|
|
| |
 |
| Universal PCI Version |
| PCI-1002HU CR |
Universal PCI, 32-ch, 12-bit, 44 kS/s High Gain Multi-function DAQ Board (RoHS)
Includes one CA-4002 D-Sub connector. |
| PCI-1002HU/S CR |
Universal PCI, PCI-1002HU with DB-1825 daughter board , Cable (RoHS)
Includes one CA-3710 D-Sub cable. |
| PCI-1002LU CR |
Universal PCI, 32-ch, 12-bit, 110 kS/s Low Gain Multi-function DAQ Board (RoHS)
Includes one CA-4002 D-Sub connector. |
| PCI-1002LU/S CR |
Universal PCI, PCI-1002LU with DB-1825 daughter board, Cable (RoHs)
Includes one CA-3710 D-Sub cable. |
| PCI Express Version |
| PEX-1002H CR |
PCI Express, 32-ch, 12-bit, 44 kS/s High Gain Multi-function DAQ Board (RoHS)
Includes one CA-4002 D-Sub connector. |
| PEX-1002L CR |
PCI Express, 32-ch, 12-bit, 110 kS/s Low Gain Multi-function DAQ Board (RoHS)
Includes one CA-4002 D-Sub connector. |
|
| |
 |
| CA-2002 |
20-pin flat cable, 20 cm x 2 |
| CA-2010 |
20-pin flat cable,1 M |
| CA-2020 |
20-pin flat cable 2 M. |
| CA-3710 |
DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) |
| CA-3710D |
DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) |
| CA-3715DM-H |
DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS) |
| CA-3730DM-H |
DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) |
| CA-4002 |
37-pin Male D-sub connector with plastic cover. |
| DB-1825 |
Analog Input Screw terminal Board |
| DB-16P |
Isolated Digital Input Daughter Board |
| DB-16R |
Relay Output Daughter Board |
| DN-20/DN-20-381 |
20-pin Din-Rail mounting I/O connector board |
| DN-37/DN-37-381 |
I/O Connector Block with DIN-Rail Mounting and 37-Pin D-Sub Connector |
| 125Ω, 0.1% DIP Resistors |
125 Ω External Resistor for use with Current Input |
|
| |
 |
| |
 |
|
| |
|
|
| |
|
|
