NS-205PF Series/NSM-205PF Series
4-port 10/100 Mbps PoE (PSE) with 1 fiber port Switch
NS-205PF-24V Series/NSM-205PF-24V Series
4-port 10/100 Mbps PoE (PSE) with 1 fiber port and +24 VDC Input |
|
| |
| |
|
|
|
 |
 |
 |
 |
Model: NS-205PFC/FCS/FCS-60
NS-205PFC-24V/FCS-24V/FCS-60-24V |
Model: NS-205PFT/NS-205PFT-24V |
Model: NSM-205PFC/FCS/FCS-60
NSM-205PFC-24V/FCS-24V/FCS-60-24V |
Model: NSM-205PFT/
NSM-205PFT-24V |
|
|
| |
 |
The NS-205PF/NSM-205PF is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NS-205PF/NSM-205PF makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions.
The NS-205PF-24V/NSM-205PF-24V series is designed with 24 VDC to 48 VDC boost for PoE application where 48 VDC power supply is not available. |
| |
 |
- Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
- Each port supports both 10/100 Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- 4 PoE ports with Power Sourcing Equipment (PSE) operation
- Automatic MDI/MDI-X crossover for plug-and-play
- Auto-detection of PD (powered devices) and automatic power management
- Over-temperature, over-current and over/under-voltage detection
- Supports operating temperatures from -30 ~ +75 °C
- DIN-Rail Mounting
|
| |
 |
| Models |
NS-205PF-24V |
NSM-205PF-24V |
NS-205PF |
NSM-205PF |
| PoE |
802.3af |
| Input Voltage Rangeg |
+18 ~ 32 VDC |
+46 ~ +55 VDC |
| Operating Temperature |
-30 °C ~ +75 °C |
| Casing |
Plastic |
Metal (IP30) |
Plastic |
Metal (IP30) |
| Installation |
DIN-Rail Mounting |
Dimensions (W x H x D)
(Unit: mm) |
31 x 157 x 113 |
25 x 168 x 119 |
31 x 157 x 113 |
25 x 168 x 119 |
|
| |
 |
| Models |
NS-205PF Series |
NSM-205PF Series |
NS-205PF-24V Series |
NSM-205PF-24V Series |
| Technology |
| Standards |
IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) |
| Processing Type |
Store & forward; wire speed switching |
| MAC Addresses |
1024 |
| Memory Bandwidth |
3.2 Gbps |
| Frame Buffer Memory |
512 Kbit |
| Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| Ethernet Interface |
| RJ-45 Ports |
10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| LED Indicators |
Power, Link/Act, Power Device is detected |
| Ethernet Isolation |
1500 Vrms 1 minute |
| +/-4 kV ESD Protection |
Yes |
| Fiber Interface (100 Base-FX; SC/ST type) |
| Multi-Mode |
NS-205PFT/FC
NSM-205PFT/FC
NS-205PFT-24V/FC-24V
NSM-205PFT-24V/FC-24V |
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm
Distance: 2 km, (62.5/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Min. RX Overload: -8 dBm
Budget: 12 dBm |
| Single-Mode |
NS-205PFCS
NSM-205PFCS
NS-205PFCS-24V/FCS-24V
NSM-205PFCS-24V/FCS-24V |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 30 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -15 dBm
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm
Min. RX Overload: -5 dBm
Budget: 19 dBm |
| Single-Mode |
NS-205PFCS-60
NSM-205PFCS-60
NS-205PFCS-60-24V/FCS-60-24V
NSM-205PFCS-60-24V/FCS-60-24V |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 60 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -5 dBm
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm
Min. RX Overload: -5 dBm
Budget: 30 dBm |
| Power Input |
| Input Voltage Range |
+46 ~ +55 VDC for PoE output |
+18 ~ +32 VDC |
| Power Consumption |
0.08 A @ 48 VDC without PD loading;
1.5 A @ 48 VDC with PD full loading |
0.24 A @ 24 VDC without PD loading;
3.2 A @ 24 VDC with PD full loading;
4.6 A @ 18 VDC with PD full loading |
| Protection |
Power reverse polarity protection |
| +/-4 kV ESD Protection |
Yes |
| Connector |
3-Pin Removable Terminal Block |
| PoE Technology |
| PoE Compliance |
100% IEEE 802.3af compliant |
| PoE Classification |
PSE (Power Sourcing Equipment) |
| PoE Voltage |
+48 VDC depending on power input |
| PoE Voltage |
Up to 15.4 watts per channel |
| PoE Operation |
Automatic detection and power management |
| PoE Pin assignments |
V+ (Pin 1,2), V- (Pin 3,6) |
| PoE disconnect mode |
DC disconnect |
| Mechanical |
| Casing |
Plastic
(Flammability UL 94V-0) |
Metal (IP30 Protection) |
Plastic
(Flammability UL 94V-0) |
Metal (IP30 Protection) |
| Dimensions (W x L x H) (Unit: mm) |
31 x 157 x 113 |
25 x 168 x 119 |
31 x 157 x 113 |
25 x 168 x 119 |
| Installation |
DIN-Rail Mounting |
| Environment |
| Operating Temperature |
-30 °C ~ +75 °C |
| Storage Temperature |
-40 °C ~ +85 °C |
| Ambient Relative Humidity |
10% ~ 90% RH, non-condensing |
|
| |
 |
| NS-205PFT CR |
Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS) |
| NS-205PFC CR |
Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS) |
| NS-205PFCS CR |
Single-mode 30 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS) |
| NS-205PFCS-60 CR |
Single-mode 60 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS) |
| NSM-205PFT CR |
Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS) |
| NSM-205PFC CR |
Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS) |
| NSM-205PFCS CR |
Single-mode 30 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS) |
| NSM-205PFCS-60 CR |
Single-mode 60 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS) |
| NS-205PFT-24V CR |
Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS) |
| NS-205PFC-24V CR |
Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS) |
| NS-205PFCS-24V CR |
Single-mode 30 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS) |
| NS-205PFCS-60-24V CR |
Single-mode 60 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS) |
| NSM-205PFT-24V CR |
Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS) |
| NSM-205PFC-24V CR |
Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS) |
| NSM-205PFCS-24V CR |
Single-mode 30 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS) |
| NSM-205PFCS-60-24V CR |
Single-mode 60 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS) |
|
| |
 |
| DR-120-24 |
24V/5 A, 120 W Single Output Industrial DIN Rail Power Supply |
| MDR-60-24 |
24V/2.5A, 60 W Power Supply with DIN-Rail Mounting |
| MDR-60-48 |
48 V/1.25 A, 60 W Power Supply with DIN-Rail Mounting |
| DIN-KA52F-48 |
48 V/0.52 A, 25 W Power Supply with DIN-Rail Mounting |
| KA52F-48 |
48 V/0.52 A, 25 W Power Supply |
|
| |
|
|
| |
|
|
