home > product> solutions > industrial communication > Programmable Device Servers > PDS-5105D-MTCP
 
PDS-5105D-MTCP
Programmable Serial-to-Ethernet Device Servers
 
 ~ NEW ~
Model: PDS-5105D-MTCP
 
  • Integrates any RS-232/485 serial device in an Ethernet Network
  • Virtual COM extends the PC COM ports
  • Virtual COM supports 32-bit and 64-bit Windows XP/2003/Vista/7/8
  • Powerful programmable device server
  • Watchdog timer suitable for use in harsh environments
  • Power reverse polarity protection
  • Serial port +/-2 kV ESD protection circuit
  • Self-tuner ASIC controller on the RS-485 port
  • RoHS compliant & no halogen
  • Built-in high performance MiniOS7 from ICP DAS
  • 2-Port 10/100 Base-TX Ethernet Switch with LAN Bypass
  • ODM service is available
  • Low power consumption
 
The PDS-5105D-MTCP is a family of Programmable Device Servers, also known as "Serial-to-Ethernet gateway", that are designed for linking RS-232/485 devices to an Ethernet network. The user-friendly VxComm Driver/Utility allows users to easily turn the built-in COM ports of the PDS-5105D-MTCP into standard COM ports on a PC. By virtue of its protocol independence, a small-core OS and high flexibility, the PDS-5105D-MTCP is able to meet the demands of every network-enabled application.

The PDS-5105D-MTCP includes a powerful and reliable Xserver programming structure that allows you to design your robust Ethernet applications in one day. The built-in, high-performance MiniOS7 boots the PDS-5105D-MTCP up in just one second and gives you fastest responses.

The PDS-5105D-MTCP also works as a Modbus TCP to RTU/ASCII gateway that supports most SCADA/HMI communications based on the Modbus/TCP protocol.

The PDS-5105D-MTCP is equipped with 1 RS-232/485 port and 9 RS-485 ports. The removable on-board terminal block connector is designed for easy and robust wiring in industrial situations.

The PDS-5105D-MTCP is equipped with a 2-port 10/100Base-Tx Ethernet switch that simplifies network wiring by cascading Ethernet devices. Furthermore, the module features a LAN Bypass function allowing network traffic to be continued between two network segments (Ethernet port1 and port2). In cases where the module is offline due to of software, hardware or power failure, the LAN Bypass function will be automatically activated, and the essential communications on the network can continue operating without interruption.
 
  • Factory, Building and Home Automation
 
System
CPU 80186 or compatible (16-bit and 80 MHz)
SRAM 512 KB
Flash 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles.
EEPROM 16 KB
Communication Interface
Ethernet 2-Port 10/100 Base-TX Ethernet Switch with LAN Bypass, RJ-45 x 2
(Auto-negotiating, Auto-MDI/MDIX, LED indicator)
COM1 RS-232(TxD, RxD, GND)/RS-485(D1+, D1-), Self-tuner ASIC inside, non-isolated
COM2 ~ 10 RS-485(Dx+, Dx-), Self-tuner ASIC inside, non-isolated
RS-485 Bias Resistor Yes, 1 KΩ
Node 254 (max.)
COM Port Format
Baud Rate 115200 bps Max. @ 10 Ports, half-duplex, 80% loading
Data Bit 7, 8: for COM1 and COM2
5, 6, 7, 8: for COM3 ~ COM10
Parity None, Odd, Even, Mark, Space
Stop Bit 1, 2
Power
Protection Power reverse polarity protection
Power Consumption 0.18 A @ 24 VDC
Frame GND Yes (for EMS Protection)
Input Range +12 ~+48 VDC (non-regulated)
Mechanical
Dimensions (W x H x D) 91 mm x 132 mm x 52 mm
Installation DIN-Rail
Case Fire Retardant Materials (UL94-V0 Level)
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, non-condensing
 
PDS-5105D-MTCP CR Programmable Device Server with 10 RS-485 Ports, 2-Port Switch and LED Display (RoHS)
 
GPSU06U-6 24 VDC/0.25 A, 6 W Power Supply
CA-0910 9-Pin Female D-sub and 3-wire RS-232 cable, 1 M Cable <Pin Assignment>
CA-0903 9-Pin Female D-sub and RS-232 connector cable, 30 cm Cable <Pin Assignment>
MDR-20-24 CR 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting
NS-205 CR Unmanaged 5-Port Industrial Ethernet Switch (RoHS)
 
PDS Series Main Page
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player