home > product> solutions > industrial communication> Fieldbus > EtherCAT
 
ECAT-2512
ECAT-2513
 
Applications
Features
Hardware Specifications
Ordering Information
 
 
ECAT-2512
~ NEW ~
ECAT-2513
~ Available soon ~
  • 繁體中文
  • English
  • EtherCAT Junction Slave Module

             
     

    ECAT-2512 and ECAT-2513 are 1-to-2 port and 1-to-3 port EtherCAT junction slaves. They are designed for realizing flexible wiring by daisy chain and branch.

    The ECAT-2512/2513 cannot be used as a standard Ethernet switch.

     
     
    Applications  
    Benefit 1: Translate Daisy-chain to Branch Topology
    EtherCAT junction slaves can realize branch topology. They make the cabling easier than daisy-chain topology.

     
    Benefit 2: Improving the Debugging Efficiency
    If a slave device is not working or the cable is disconnected, the following slave devices on the same network all not communicate with the master controller.

    With EtherCAT junction slaves, all slave devices can be wired as separated sections. If one slave device is failed, only the slave devices on the same section will be influenced. The EtherCAT junction slave keeps the slave devices on another section communicate with the master controller. Debugging can be made separately, thus improving the debugging efficiency.

     
     
    Features  
    • Powerful MCU handles efficient network traffic
    • Distance between Stations up to 100 m (100BASE-TX)
    • Support daisy chain and star connection
    • EtherCAT conformance test tool verified
    • ESD Protection 4 KV Contact for each port
     
     
    Hardware Specifications  
    Models ECAT-2512 ECAT-2513
    Protocol
    EtherCAT
    Communication Interface
    No. of ports RJ-45 x 3 (1 IN; 2-OUT) RJ-45 x 4 (1 IN; 3-OUT)
    No. of nodes 1 2
    Data Transfer Medium Ethernet/EtherCAT Cable (Min. CAT 5e)
    Distance between Stations Max. 100 m (100BASE-TX)
    Power Input
    Redundant Input Range +12 ~ +48 VDC
    Power Consumption 0.06 A @ 24 VDC
    Protection Power reverse polarity protection
    Connector 3-Pin Removable Terminal Block (5.08mm)
    Mechanism
    Dimensions 110mm x 90mm x 33mm (H x W x D)
    Installation DIN-Rail
    Environment
    Operating Temperature -25 °C ~ + 75 °C
    Storage Temperature -30 °C ~ + 80 °C
    Ambient Relative Humidity 10 ~ 90% RH, non-condensing
     
     
    Ordering Information  
    ECAT-2512 CR
    1 IN; 2-OUT EtherCAT Junction Slave Module (RoHS)
    ECAT-2513 CR
    1 IN; 3-OUT EtherCAT Junction Slave Module (RoHS)
     
       
    TOP  
       
       

    這個頁面上的內容需要較新版本的 Adobe Flash Player。

    取得 Adobe Flash Player