home > product> solutions > industrial communication> Fieldbus > EtherCAT
 
ECAT-2511-A
ECAT-2511-B
 
Applications
Features
Hardware Specifications
Ordering Information
 
 
ECAT-2511-A
~ Available soon ~		 ECAT-2511-B
~ Available soon ~
  • 繁體中文
    		•
  • English
    		•

    EtherCAT to Single-mode Fiber Converter
             
    		 

    The ECAT-2511-A and ECAT-2511-B are EtherCAT to single-mode fiber optic converter. They are designed not only to convert EtherCAT signals to optical signals on a fiber optic cable, to reshape the EtherCAT signal to compensate for distortion, but to isolate the bus error due to the wire short or disturbance. With the advantage of fiber optic, the ECAT-2511-A and ECAT-2511-B enable secure data transmission via fiber optic transmission, and helps the EtherCAT network to prevent the noise from EMS/RFI interference. 

    50% Cost Saving for Fiber Optic Infrastructures:
    With a pair of ECAT-2511 series products (ECAT-2511-A and ECAT-2511-B), you can double the utilization of your existing, costly fiber optic cable, and save 50% of the cost of a newly installed fiber optic application.

    		  
     
    Applications  

    		 
     
    Features  
    • Powerful MCU handles efficient network traffic
    • Distance between Stations up to 15 km (100BASE-FX)
    • 50% Cost Saving for Fiber Optic Infrastructures
    • EtherCAT conformance test tool verified
    • ESD Protection 4 KV Contact for each port
    		 
     
    Hardware Specifications  
    Models ECAT-2511-A ECAT-2511-B
    Protocol
    EtherCAT
    Communication Interface
    RJ-45 Port RJ-45 x 1 Distance between Stations: Max. 100 m (100BASE-TX) Data Transfer Medium: Ethernet/EtherCAT Cable (Min. CAT 5e)
    Fiber Port Single-Mode; SC connector x 1 Single-Mode; SC connector x 1
    Wavelength TX: 1310, RX: 1550 nm TX: 1550, RX: 1310
    Distance between Stations 25 km (9/125 μm recommended) 25 km (9/125 μm recommended)
    Power Input
    Redundant Input Range +12 ~ +48 VDC
    Power Consumption 0.1 A @ 24 VDC
    Protection Power reverse polarity protection
    Connector 3-Pin Removable Terminal Block (5.08mm)
    Mechanical
    Dimensions 110mm x 90mm x 33mm (H x W x D)
    Installation DIN-Rail
    Environmental
    Operating Temperature -25 °C ~ + 75 °C
    Storage Temperature -30 °C ~ + 80 °C
    Ambient Relative Humidity 10 ~ 90% RH, non-condensing
    		 
     
    Ordering Information  
    ECAT-2511-A CR
    		 EtherCAT Single-Strand Media Converter, TX 1310 nm, RX 1550 nm, SC (RoHS)
    ECAT-2511-B CR
    		 EtherCAT Single-Strand Media Converter, TX 1550 nm, RX 1310 nm, SC (RoHS)

    Important Note:     You must purchase both ECAT-2511-A and ECAT-2511-B since these products work as a pair.    		  
       
    TOP  
       
       

    這個頁面上的內容需要較新版本的 Adobe Flash Player。

    取得 Adobe Flash Player